| View previous topic :: View next topic |
| Author |
Message |
jf56
Joined: 02 Feb 2010 Posts: 10 Location: newport, oregon
|
 Posted: Thu Nov 04, 2010 9:47 pm Post subject: doable: swapping out lens mount plate CV125? |
|
 Posted: Thu Nov 04, 2010 9:47 pm Post subject: doable: swapping out lens mount plate CV125? |
|
|
jf56 wrote:
Is swapping out a lens body from one mounting plate (canon) with a Nikon plate doable? And when I ask "doable" I mean is it "simply" a matter of changing the mounting plates, or is there a lot more to it? (focal plane distances, etc)?
I found a dealer from china who insists that he can do this, to give me a lens that will focus to infinity without any issues at all, and mount onto a Nikon body, whereas the lens originally has a canon mount. Any replies appreciated. |
|
| Back to top |
|
 |
sichko
 Joined: 20 Jun 2008 Posts: 2475 Location: South West UK
|
 Posted: Thu Nov 04, 2010 11:16 pm Post subject: |
|
 Posted: Thu Nov 04, 2010 11:16 pm Post subject: |
|
|
sichko wrote:
There's a link ...
http://forum.mflenses.com/nikon-d40-modified-to-m42-t20965.html
... which describes the replacement of the Nikon F mount on a D40 with an M42 mount.
Presumably you could do it with a Canon mount athough, IIRC, the Canon mount has a wider throat than Nikon F and this might cause problems. _________________ John |
|
| Back to top |
|
 |
indianadinos
 Joined: 06 Jul 2008 Posts: 1310 Location: Toulouse, France
Expire: 2011-12-05
|
 Posted: Thu Nov 04, 2010 11:22 pm Post subject: |
|
 Posted: Thu Nov 04, 2010 11:22 pm Post subject: |
|
|
indianadinos wrote:
Hi,
I'm far from being an expert, but i would say that mounting a Canon lens on a Nikon body keeping infinity focus without additional diopters would be almost impossible: the Canon EF register distance for lenses is 44mm, while Nikon has a register distance of 46.5mm. Moreover, the throat of a Canon mount has a diameter of 54mm, where the Nikon one has 44mm only ...
Definitively, i would say that a Nikon lens can be mounted on a Canon body without hassle, while the opposite is almost impossible: even if the barrel of the lens would be shortened of about 2.5mm, you would still have the problem of the diameter of the bottom of the lens ...
But, as said before, i can be wrong ...
Cheers _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Back to top |
|
 |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Fri Nov 05, 2010 12:31 am Post subject: |
|
 Posted: Fri Nov 05, 2010 12:31 am Post subject: |
|
|
Orio wrote:
There would be a lot more to do than switching plates and I believe the job is downright impossible for the reasons explained by the gentlemen before me. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
Scheimpflug
 Joined: 06 Feb 2010 Posts: 1888 Location: New Zealand / USA
Expire: 2011-11-18
|
 Posted: Fri Nov 05, 2010 1:19 am Post subject: Re: doable: swapping out lens mount plate CV125? |
|
 Posted: Fri Nov 05, 2010 1:19 am Post subject: Re: doable: swapping out lens mount plate CV125? |
|
|
Scheimpflug wrote:
| jf56 wrote: |
Is swapping out a lens body from one mounting plate (canon) with a Nikon plate doable? And when I ask "doable" I mean is it "simply" a matter of changing the mounting plates, or is there a lot more to it? (focal plane distances, etc)?
I found a dealer from china who insists that he can do this, to give me a lens that will focus to infinity without any issues at all, and mount onto a Nikon body, whereas the lens originally has a canon mount. Any replies appreciated. |
Do you have any more details on the lens?
What you described could be as simple as swapping out the adapter on a T-mount, TX-mount, or Adaptall/Adaptall-2 mount lens. In this case, it would take less than a minute to change the lens mount, provided the dealer had the right Nikon mount to put on it.
If the lens originally came with a fixed Canon mount (FL? FD? EOS?), then the process will require a dedicated conversion - potentially taking hours of time or not even being possible at all. _________________ Sigma DP1, Nikon D40 (hers ), Polaroid x530, Pentax P30t, Pentax P50, (P30t/P50 K-A to Nikon F body mount conversion)
Nikon: 18-55/3.5-5.6 "G ED II DX" (F) Soligor: 28/2.8 (FL->F converted), 135/3.5 (F), 3x TC (F, modified) Kalimar: 28-85/3.5 (F)
Vivitar: 70-210/2.8-4.0 Version 3 (F), Tele 500/6.3 Preset (F), 19/3.8 (F) Minolta: 300/5.6 (SR/MC/MD pending F conversion)
Tamron: 28/2.8 (Adaptall) Panagor: 28/2.5 (FD) Aetna: 300/5.6 (F) Osawa: MC 28/2.8 (F)
Vintage Lenses: Dallmeyer: 1940s A.M. 14in 356mm f4 (ULF->M42) 1930s Adon Telephoto Taylor, Taylor & Hobson: 1880s Rapid Rectilinear 8 1/2 x 6 1/2 11.31in f/8 (LF->?)
Parts Lenses: Nikon 35-135/3.5-4.5 (F), Sigma 70-210/4.5 (F), Nikon 50/1.8 Series E (F) |
|
| Back to top |
|
 |
sichko
 Joined: 20 Jun 2008 Posts: 2475 Location: South West UK
|
 Posted: Fri Nov 05, 2010 9:20 am Post subject: Re: doable: swapping out lens mount plate CV125? |
|
 Posted: Fri Nov 05, 2010 9:20 am Post subject: Re: doable: swapping out lens mount plate CV125? |
|
|
sichko wrote:
| jf56 wrote: |
| I found a dealer from china who insists that he can do this, to give me a lens that will focus to infinity without any issues at all, and mount onto a Nikon body, whereas the lens originally has a canon mount. Any replies appreciated. |
I guess that your lens is the Cosina-Voigtlaender 2.5/125. There's a guy on nikongear.com who converted this lens from Canon to Nikon mount. If you visit the site and carry out a search you might be able to find out more. _________________ John |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|