MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

How to prevent light through viewfinder
View previous topic :: View next topic  


Reply

Hi,

I have a small n stupid question. I am new in long exposure photography. I took few yesterday. I have uploaded one of them. Top left and bottom left edges have some extra lightness sort of anti-vignetting (I dont know if there is such word). This was a 30 sec exposure. Does anyone know why this is happening?

My best guess is that light is seeping through viewfinder. Is that true? Please help.


Reply

I don't know if this is your case. Typically, light coming through viewfinder results in an overall brightness and loss of contrast. Yours look more like a localized light leak. In any case, to block light coming through viewfinder, simply put anything dark and opaque over it.


Reply

It's always a good idea to cover the viewfinder during long exposures. Some cameras have a viewfinder cover built in, others come with a cover (e.g. one that attaches to the neckstrap).

On digital cameras long exposures may also result in visible amplifier glow, which appears as a glow emanating from one edge of the frame. One way to reduce it is to follow the real shot with a dark frame of equal duration and settings (e.g. put the lens cap on and take another picture) and subtract that from the photo. Even better, shoot many dark frames and average them. (Some cameras, e.g. Sony and Minolta DSLRs, also have a built-in dark frame subtraction feature; it's called “long exposure noise reduction”.)


Last edited by Arkku on Sun May 09, 2010 1:39 am; edited 1 time in total


Reply

I agree with Arkku, that looks like amp noise to me, result from your sensor that has warmed/heated up during several long exposures prior to this exposure.

Vilhelm


Reply

Esox lucius wrote:
I agree with Arkku, that looks like amp noise to me, result from your sensor that has warmed/heated up during several long exposures prior to this exposure.

Vilhelm


+1
I have experiences the same. Also the pixels that are sparking up ( stars without trails).
Easy to clean up or you can map them with the cap on technique as Arkku has explained.


Reply

F16SUNSHINE wrote:
Esox lucius wrote:
I agree with Arkku, that looks like amp noise to me, result from your sensor that has warmed/heated up during several long exposures prior to this exposure.

Vilhelm


+1
I have experiences the same. Also the pixels that are sparking up ( stars without trails).
Easy to clean up or you can map them with the cap on technique as Arkku has explained.

+2


Reply

The glow, yes, agree completely with the above advice.

For the hot pixels though, they are so distinct that you could probably remove them with dedicated hot pixel removal software quite easily. Either that, or some very minor manual touches in an image editor. It would be best to let them be removed by the dark frame subtraction, but if you don't have time to take the dark frames, or forget, you can still fix them after the fact. Cool


Reply

Dont know, which Camera you are did use for the image..

please add the complete EXIF if possible.

If this was a Nikon, some parameters could also set to wrong values.

Active D-Lighting = AUTO
Contrast = Active D-Lighting
Brightness = Active D-Lighting

sometimes this gives stunning results.. we discussed one of these phenomenons in our german forum some days ago.

The complete discussion (in german, use google translator)..
especially look at the first attached image there.. !!

http://www.digicamclub.de/showthread.php?12432-Hilfe-was-ist-das

Could be also the problem in your image.. but i am not a Nikonian..

Cheers
Henry