MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Numbers or holes punched into film leader?
View previous topic :: View next topic  


Reply

I picked up a few more old film cartridges for my collection, and among them was this "Ferranicolor Invertible" cartridge with this series of numbers punched into the leader:



Does anyone know what these numbers might represent? Question

There were several other Ferrania cartridges in the batch, each with what looks like different types of film in them, so I believe these cartridges had been used for bulk loading. So the numbers might not correspond to a Ferrania film...


Last edited by Scheimpflug on Mon Aug 15, 2011 5:07 pm; edited 1 time in total


Reply

I remember seeing these perforated manufacturing batch numbers on film, for quality control management before DX coding. The first digit is the ... just kidding Laughing I have no clue!


Reply

visualopsins wrote:
I remember seeing these perforated manufacturing batch numbers on film, for quality control management before DX coding. The first digit is the ... just kidding Laughing I have no clue!

Haha. I was trying to figure out the same thing... but I am at a loss for finding any sort of pattern to the numbers. Wink Batch number or some other internal tracking code would certainly make sense.


One thing I can say - the perforations are very cleanly made, so it must be something from the factory. I know that punching used to be a somewhat common DIY trick (to help identify different films in the dark, or to identify where to cut or reload a roll that has been partially exposed)... but this is definitely too good for that. Wink


Reply

For anyone following along, or finding this in searches, I have found a few more examples of holes punched in film leaders.


Here is a scan I made from an old Kodak book, demonstrating a technique to retrieve a lost leader. Note that the Kodak film leader has a sequence of holes punched in it...





... and here is an image of an Agfa Rapid cassette, with "AGFA" punched into the film leader.

(Image is from the highly recommended "Photo School" section of the rogerandfrances website, http://www.rogerandfrances.com/photoschool/ps%20how%20choose%20cassetes.html)


Reply

... and here is one more example:



This is from an eBay auction (Click here to see on Ebay) for a 24-exposure roll of Kodak Kodacolor VR 1000 film.

According to Wikipedia, Kodacolor VR 1000 was introduced in 1983 and discontinued in 1986, so that at least gives some sort of timeframe to when Kodak was punching the film leaders.
http://en.wikipedia.org/wiki/Kodacolor_%28still_photography%29#Kodacolor_VR_1000


I also noticed on that Wikipedia page that Kodacolor VR 1000 has a two letter code of "CF"... whereas "CL" (the letters on the film in the photo I scanned from the book, in my previous post above) refers to Kodacolor VR 200, introduced in 1982 and discontinued in 1986. These were both early T-Grain films, so perhaps tracking batches was more important at this time?


Reply

Here is another example, some 8mm movie film (16mm wide before being split):


(Image from: http://ian-partridge.com/tranp3.html)

I think the punching is letters that say "color cine", but I could be wrong.


Reply

Those holes? Remember Hollerith. Wink Those are machine-readable codes. Automated develop & print machine-readable. Used to keep track of individual rolls through mass production.


Reply

One more example:


Kodak Panatomic-X, expiration March 1964, posted to photo.net forums by Mike Gammill. Just a single larger hole punched this time.
(Source: http://photo.net/classic-cameras-forum/00Ywqn)


Reply

A superia 200 on my desk has one hole like that but about level where the leader ends


Reply

Excalibur wrote:
A superia 200 on my desk has one hole like that but about level where the leader ends


Any chance you would be able to post a picture of it?

As far as I know, my thread here is the only place on the entire internet with any information about these leader markings. Shocked So while it isn't especially informative at this time, I figure that if I keep adding all of the examples that I find, then eventually we might be able to correlate the markings or find something useful to someone. Very Happy


Reply

I'm guessing that's a manufacturing thing to hep the machines track where to cut the leaders. Since the films has to be kept in the dark, machines tracking films movement through the cutting apparatus would be effectively 'blind', so a tactile means of tracking film progress may be useful. Different holes could be used to ensure different types of film end up in the correct canisters. More complex numbers may just be to track batches and perform QC.

All that is JUST CONJECTURE. Seems a plausible or at least logical theory, though.


Reply

David wrote:
All that is JUST CONJECTURE. Seems a plausible or at least logical theory, though.


Unless we learn anything more "official", conjecture is pretty much best information we have at this point! Thanks for the ideas. Cool


Reply

This is an interesting thread. Smile
I had a look through my films and came up with this - a roll of Kodachrome II with an expiry date of Nov 1970!



Reply

Wow, Edgar, that brings back memories. That was my favourite film and I still can't find anything to match its colour. Such a pity you can't get it developed any longer.

Remind me of the ASA rating please, is it 64?


Reply

peterqd wrote:
Wow, Edgar, that brings back memories. That was my favourite film and I still can't find anything to match its colour. Such a pity you can't get it developed any longer.

Remind me of the ASA rating please, is it 64?


No Peter, it is 25 ASA.


Reply

Thanks! A man in my local Jessops said it was 64 and I've always felt that was wrong. I only have to look at my old slides to see the camera shake and remember I often had to use 1/30 with my slow lens. Smile

Sorry this is OT. Embarassed


Reply

***Any chance you would be able to post a picture of it?***

I'm not very good using a digital camera Embarassed