MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Beauty Beaumat Rangefinder
View previous topic :: View next topic  


Reply

Here is another one of my "as-is" purchases, a Beauty Beaumat rangefinder:



This model was made in Japan, and features an unusual bullet shaped "pod" to hold the display for the selenium light meter.



The lens is a 45/2.8 "F. C. BIOKOR", but I can't find any information on this design... the shutter is a Copal-SV.


It also included this nifty vented 46mm Kenko lens hood:



... as well as a two-piece leather grip/case:




I'm not quite sure what I will do with this one.

A previous owner had pushed the wind lever too hard at its stop, and bent the guide pin for the mechanism which prevents double-advancing before an exposure has been taken. This had the result that it was locked in place and couldn't be used at all. Sad I can trip and reset the mechanism manually with the top cover removed, and I believe I can fix it by straightening the guide pin. Another option would be to simply removing the double-advance lock entirely, I would just have to be aware of whether I had wound it or not.

The meter is a selenium type, and although it does react to large changes in light, it doesn't appear to do so in a way that would be useful for metering. It also appears to always fire at the same shutter speed, regardless of what the setting on the lens is set to. Wink


Does anyone have any experience with these Beauty rangefinders? Question


Reply

Really beautiful camera. I can see why it was damaged. Did you read this link yet. It tells how it was damaged.

http://westfordcomp.com/classics/beaumat/beaumat.html
Butkus has the manual for it.


Reply

Thanks Walter. That's a good link, and I'll check Butkus for the manual.

Unfortunately, what that site describes isn't the same as the failure here with mine. With this one, if you advance the lever, it literally jams outward - sticking out from the camera body at its full wind position. You can't move it backwards, because the catch hasn't released.

This is a lousy picture, but here is the position where it will get stuck:


Once you have wound it, the only way to get the lever to return is to remove it, take off the top cover, trip the catch, replace the top cover, and re-attach the lever. That is, until I can fix it. Wink