MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Which canadian balsam?
View previous topic :: View next topic  


Reply

I see there're many on ebay, but which ones are the good/bad ones?
Or, i can buy an used bottle (or fraction) from any of you, as i only need a small little Razz.


Reply

I've found Canada balsam to be less reliable than the modern ultraviolet-setting alternative.
Balsam varies in quality and grade because of its organic nature.
A search of the forums for "separation" or "balsam fault" will give results of others' experience.


Reply

and where can i get that?
-Also, i see they are used to "repair" glass? Is that true? anyone has experience with it?


Reply

Liquid Canada Balm is the wrong kind - you need the solid rosin to cement lenses with. I've sometimes seen it at astronomy online stores, while the liquid stuff typically is sold by microscopy suppliers (where it is used as a neutral immersion liquid).

I'd strongly recommend optical UV curing cements - that stuff is already hard enough to handle for a beginner, no need to get any more complex. But I have no idea where you could get hold of it in Peru - hereabouts it takes some talking skills to get a vendor to split with "samples", minimum industrial quantities being beyond the amount even a large scale camera repair workshop could use up in time before expiration.


Reply

I'm in the United Kingdom.
The one I use is made by Loctite and is called Glass Bond.
I have no idea what may be available in Peru.
Listed at less than £5 on ebay UK.
Someone who repairs cars may have some, or someone who makes fish tanks.


Reply

unclemack wrote:
I'm in the United Kingdom.
The one I use is made by Loctite and is called Glass Bond.


That should be available pretty much anywhere, but it is not even up to the standards set by the glues car glass repair shops use, and lens glues are a grade or two above that (and come in a variety of defined refractive indices).


Reply

Hi Sevo.
I expect you would agree, though, that it's a better solution than Canada balsam and also a better solution than something that is completely unobtainable?
How would one decide on the appropriate refractive index to choose given access to a selection?
Any of these available in small quantities?


Reply

I'm sorry, but im more lost than the beginning.
What should i do now-


Reply

UV Curing Optical Cements and Photopolymers

"Canadian Balsam" (CB) is Spruce tree sap purified by slow heating and skimming, and sometimes by adding & evaporating solvents & filtering. CB has a known refractive index. Other tree saps have been used for lens cement. In Perú Copal resin could be similarly purified & used; the refractive index is likely similar to CB.

In any country try finding CB in the oldest camera shops, preferably one with old large format cameras; some may have pieces of CB.


Reply

Sevo wrote:
unclemack wrote:
The one I use is made by Loctite and is called Glass Bond.

That should be available pretty much anywhere, but it is not even up to the standards set by the glues car glass repair shops use, and lens glues are a grade or two above that (and come in a variety of defined refractive indices).

siriusdogstar wrote:
UV Curing Optical Cements and Photopolymers



There's an interesting bit of history here... Cyanoacrylate adhesives, such as what siriusdogstar linked to, were actually invented & developed by Kodak in the 1940s. Through the 60s and into the early 70s, Loctite was a major distributor of Kodak-produced cyanoacrylate adhesives, all the way up until they figured out how to manufacture it themselves.

I'm certainly not saying that modern Loctite is optics-grade, but the optics history surrounding it is still interesting. Wink


Reply

er... what should i buy then...


Reply

Hi, since you asked for answers from over 2000 possible contributors you shouldn't be too surprised to find that opinions differ.
Canada balsam works, so do the newer products.
Neither is exactly easy to use but they're difficult in different ways. Some people say they've had success with shortcuts like reheating the balsam couplet - there's plenty of information available but you have to search for it.


Reply

I suggest you try Norland Optical Adhesive, NOA 61, UV-curing, and available in small bottles from Edmunds Optical - a division of Edmunds Scientific - mail order for about US$25.

Regards

Angus