| View previous topic :: View next topic |
| Author |
Message |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Thu Dec 10, 2009 10:04 pm Post subject: Removable glue |
|
 Posted: Thu Dec 10, 2009 10:04 pm Post subject: Removable glue |
|
|
Orio wrote:
Can you recommend a removable glue, that is easy to remove if not anymore needed?
I was thinking of something like the strange stuff that you have sometimes with computer magazines, where they attach a cd or dvd to the magazine with this type of glue that you can remove without striping off the paper.
I need to glue an eyepiece to a camera, but I don't want to make a mess - I just need something that keeps it in place, there is no need to resist pressure and such, and can be removed without damage. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
ludoo
 Joined: 18 Sep 2009 Posts: 1397 Location: Milan, Italy
Expire: 2011-12-05
|
 Posted: Thu Dec 10, 2009 11:18 pm Post subject: |
|
 Posted: Thu Dec 10, 2009 11:18 pm Post subject: |
|
|
ludoo wrote:
Double-sided tape? There's one type used to tape carpets on floors which sticks pretty hard, but can be removed if necessary.
BTW lo trovi al Brico Center o in qualche colorificio ben fornito |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Thu Dec 10, 2009 11:31 pm Post subject: |
|
 Posted: Thu Dec 10, 2009 11:31 pm Post subject: |
|
|
Attila wrote:
| ludoo wrote: |
Double-sided tape? There's one type used to tape carpets on floors which sticks pretty hard, but can be removed if necessary.
BTW lo trovi al Brico Center o in qualche colorificio ben fornito |
+1 available pretty strong one I use to fix my bird plate. |
|
| Back to top |
|
 |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Thu Dec 10, 2009 11:43 pm Post subject: |
|
 Posted: Thu Dec 10, 2009 11:43 pm Post subject: |
|
|
Orio wrote:
| ludoo wrote: |
Double-sided tape? There's one type used to tape carpets on floors which sticks pretty hard, but can be removed if necessary.
BTW lo trovi al Brico Center o in qualche colorificio ben fornito |
Thanks, but I need to fix an eyepiece which is quite narrow in the area in contact with the camera. I would have problems using a tape. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
Andreas
 Joined: 16 Oct 2009 Posts: 157 Location: Extreme north of Provence, south of France
|
 Posted: Thu Dec 10, 2009 11:53 pm Post subject: |
|
 Posted: Thu Dec 10, 2009 11:53 pm Post subject: |
|
|
Andreas wrote:
"Arabic gum" could do it. It's the stuff we other printers put on our printing plates to stock them ( ok, I know that in time of CTP it's obsolete). It sticks very well and you can dissolve it with water. It's the stuff on the back of stamps, just ask a printer to give you a little.
Andreas |
|
| Back to top |
|
 |
cooltouch
 Joined: 15 Jan 2009 Posts: 9096 Location: Houston, Texas
|
 Posted: Fri Dec 11, 2009 12:06 am Post subject: |
|
 Posted: Fri Dec 11, 2009 12:06 am Post subject: |
|
|
cooltouch wrote:
You can also use contact cement -- the kind that comes in a small bottle with applicator in the cap. Here in the US, you see it in the Elmer's and DAP brands.
Contact cement never hardens. It adheres very well, but remains pliable, and also dries quickly. I would think a thin coating on the areas in question would be sufficient.
If either or both of the items are plastic, however, you might want to test it in a small inconsipicous area. It smells strongly of toluene and/or acetone before it cures, either of which will soften or disolve certain plastics.
Another item that doesn't harm plastic is silicone seal -- found in tubes. This will hold the items together provided it has enough surface area to grip, and can be removed later. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Back to top |
|
 |
Farside
 Joined: 01 Sep 2007 Posts: 6579 Location: Ireland
Expire: 2013-12-27
|
 Posted: Fri Dec 11, 2009 12:35 am Post subject: Re: Removable glue |
|
 Posted: Fri Dec 11, 2009 12:35 am Post subject: Re: Removable glue |
|
|
Farside wrote:
| Orio wrote: |
Can you recommend a removable glue, that is easy to remove if not anymore needed?
I was thinking of something like the strange stuff that you have sometimes with computer magazines, where they attach a cd or dvd to the magazine with this type of glue that you can remove without striping off the paper.
I need to glue an eyepiece to a camera, but I don't want to make a mess - I just need something that keeps it in place, there is no need to resist pressure and such, and can be removed without damage. |
http://forum.mflenses.com/just-won-a-contax-137ma-with-zeiss-planar-lens-t8814,start,30.html#82740 might be the thing. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Back to top |
|
 |
Carlsson
 Joined: 26 Jul 2008 Posts: 793 Location: Portugal
|
 Posted: Fri Dec 11, 2009 12:39 am Post subject: |
|
 Posted: Fri Dec 11, 2009 12:39 am Post subject: |
|
|
Carlsson wrote:
Perhaps a Glue Gun with hot melt adhesive, you can remove it very easy.
I use it for all my computer and server parts since years. _________________
Contax III, Zeiss Ikon ZM, Contax AX, EOS 5D, R-D1
https://mariaeero.com/contax/ |
|
| Back to top |
|
 |
greg
 Joined: 21 Mar 2009 Posts: 683
Expire: 2012-12-03
|
 Posted: Fri Dec 11, 2009 1:32 am Post subject: |
|
 Posted: Fri Dec 11, 2009 1:32 am Post subject: |
|
|
greg wrote:
What you are referring to is simply rubber cement - any stationary store should have it - thats what is used on CDs and credit cards when mailed or put in magazines |
|
| Back to top |
|
 |
SkedAddled
 Joined: 19 Oct 2008 Posts: 1447 Location: Michigan, USA
Expire: 2021-08-12
|
 Posted: Sat Dec 12, 2009 2:36 am Post subject: |
|
 Posted: Sat Dec 12, 2009 2:36 am Post subject: |
|
|
SkedAddled wrote:
| cooltouch wrote: |
| You can...use contact cement |
But as Michael mentions, most of these are based on harsh solvents which will most certainly destroy many plastics. Water-based variants are available, but these are significantly more expensive than their solvent-based counterparts. A contact cement such as is found in art & craft stores may be water-based, but I wouldn't expect to find the same in a hardware or home-improvement shop.
| cooltouch wrote: |
| Another item that doesn't harm plastic is silicone seal -- found in tubes. |
100% untrue, in my experience. Unless Michael is describing some sort of hobby or craft silicone claiming to be safe for most materials, I've never known one to exist which doesn't contain harsh solvents and bonding agents. I've even used some which will cloud nearby glass & clear plastics as it cures because of the solvent gases they emit, and they bond extremely well to nearly any dry material they cure on.
I have used many of these products a number of years, as a professional with plastic laminates such as Formica, and installation of kitchen & bathroom cabinets and countertops. _________________ Craig
Of course I'm all right! Why? What have you heard!?
Canon Digital EOS 5D Mk IV, EOS 50D, Powershot S3 iS
Vivitar 28 f/2.8 OM - Zuiko 50 f/1.8 OM - Tamron SP 28-80 f/3.5 AD2[Favorite!] - Hanimar 135 f/3.5 M42 - Soligor 135 f/2.8 T4 - Tamron SP 60-300 f/3.8 AD2 - Soligor 75-260 f/4.5 M42 - Soligor 400 f/6.3 T4 - Soligor 500 f/8 T2 Cat + Matched 2X TC - Addiction Growing!
This is us -- We drive these -- We're named these |
|
| Back to top |
|
 |
cooltouch
 Joined: 15 Jan 2009 Posts: 9096 Location: Houston, Texas
|
 Posted: Sat Dec 12, 2009 4:12 am Post subject: |
|
 Posted: Sat Dec 12, 2009 4:12 am Post subject: |
|
|
cooltouch wrote:
| SkedAddled wrote: |
| cooltouch wrote: |
| Another item that doesn't harm plastic is silicone seal -- found in tubes. |
100% untrue, in my experience. Unless Michael is describing some sort of hobby or craft silicone claiming to be safe for most materials, I've never known one to exist which doesn't contain harsh solvents and bonding agents. I've even used some which will cloud nearby glass & clear plastics as it cures because of the solvent gases they emit, and they bond extremely well to nearly any dry material they cure on.
I have used many of these products a number of years, as a professional with plastic laminates such as Formica, and installation of kitchen & bathroom cabinets and countertops. |
Honestly, I've never used any of the sorts of silicone products you're describing. Most of the automotive types I've used are specially designed not to harm the sensitive elements inside oxygen sensors, and are resistant to most solvents. I've used these in all sorts of automotive applications, including plastics, and have never witnessed any sort of reaction. They do emit a smell reminiscent of vinegar when curing, though. Nonetheless, I would use caution with these just to be safe. However, I would think that the household types that are used for caulking around sinks or tubs or windows would be safe enough. But best to use with caution, I suppose. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Back to top |
|
 |
no-X
 Joined: 19 Jul 2008 Posts: 2495 Location: Budejky, Czech Republic
|
 Posted: Sat Dec 12, 2009 12:25 pm Post subject: |
|
 Posted: Sat Dec 12, 2009 12:25 pm Post subject: |
|
|
no-X wrote:
| Carlsson wrote: |
Perhaps a Glue Gun with hot melt adhesive, you can remove it very easy.
I use it for all my computer and server parts since years. |
+1  _________________ (almost) complete list of Helios lenses |
|
| Back to top |
|
 |
SkedAddled
 Joined: 19 Oct 2008 Posts: 1447 Location: Michigan, USA
Expire: 2021-08-12
|
 Posted: Sun Dec 13, 2009 1:57 am Post subject: |
|
 Posted: Sun Dec 13, 2009 1:57 am Post subject: |
|
|
SkedAddled wrote:
| cooltouch wrote: |
| SkedAddled wrote: |
| cooltouch wrote: |
| Another item that doesn't harm plastic is silicone seal -- found in tubes. |
100% untrue, in my experience. Unless Michael is describing some sort of hobby or craft silicone claiming to be safe for most materials, I've never known one to exist which doesn't contain harsh solvents and bonding agents. I've even used some which will cloud nearby glass & clear plastics as it cures because of the solvent gases they emit, and they bond extremely well to nearly any dry material they cure on.
I have used many of these products a number of years, as a professional with plastic laminates such as Formica, and installation of kitchen & bathroom cabinets and countertops. |
Honestly, I've never used any of the sorts of silicone products you're describing. Most of the automotive types I've used... |
Aha! I was not even considering the automotive types, as it's been at least 15 years since I've used any. Makes sense to me now, as several are indeed specially formulated for sealing liquid cooling systems.
However, the types used for various home improvement and kitchen & bath applications are certainly NOT recommended for plastics of the types used in modern cameras.
Latex, or water-based adhesives, are a completely different story, however. _________________ Craig
Of course I'm all right! Why? What have you heard!?
Canon Digital EOS 5D Mk IV, EOS 50D, Powershot S3 iS
Vivitar 28 f/2.8 OM - Zuiko 50 f/1.8 OM - Tamron SP 28-80 f/3.5 AD2[Favorite!] - Hanimar 135 f/3.5 M42 - Soligor 135 f/2.8 T4 - Tamron SP 60-300 f/3.8 AD2 - Soligor 75-260 f/4.5 M42 - Soligor 400 f/6.3 T4 - Soligor 500 f/8 T2 Cat + Matched 2X TC - Addiction Growing!
This is us -- We drive these -- We're named these |
|
| Back to top |
|
 |
ryan s
 Joined: 26 Sep 2008 Posts: 384 Location: Madison, WI
|
 Posted: Sun Dec 13, 2009 5:27 pm Post subject: |
|
 Posted: Sun Dec 13, 2009 5:27 pm Post subject: |
|
|
ryan s wrote:
Somewhat of a pain to clean off, 100%, unless it comes off in large pieces or all at once...
Regardless, sticks to paint and won't melt plastic...I'm looking at my 1/2 empty tube right now
 _________________ Pentax Bodies: K10D + D-BG2 | MX |
M: Zenitar 16/2.8 | 28/2.8 | 50/1.7 | M39: Mir-1 GP 37/2.8 M42: Vivitar 28/2.5 AD2: Tamron SP Macro 90/2.5 |
|
| Back to top |
|
 |
Kathmandu
 Joined: 09 Dec 2009 Posts: 1479 Location: (Kathmandu,Nepal. Currently)Pacific Northwest, USA
Expire: 2012-04-08
|
 Posted: Thu Jan 14, 2010 9:52 pm Post subject: |
|
 Posted: Thu Jan 14, 2010 9:52 pm Post subject: |
|
|
Kathmandu wrote:
I agree with "ryan s"-
I have used this and other silicon adhesive paste(I think you can get them in a few different colors mainly white, clear, wood, and black).It works good if you clean the sides your are gluing with alcohol on a cloth or swab, then apply the paste and squish it down gently making sure you push any bubbles out that way. While the paste is still fresh and holding the glued components down-clean the excesses or undesirables with alcohol. Once you are satisfied with the outcome you should weight it down or clamp it with something and let it set for at least a hour or so.
It holds the glued components very well together.
The great thing with this you can take it apart without breaking anything if you dont want it anymore -if you gently insert something in the joined crack ,and gently pry it at different spots. The mess it leaves behind is cleanable with achohol- you may have to peel the bigger clumps like "ryan s" mentions with your nails first, and a cloth soaked in alcohol should clean up the rest very well, leaving no trace scratches etc..the key is to be gentle.
Marine hardware stores always carry them. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|