| View previous topic :: View next topic |
| Author |
Message |
Razster
 Joined: 05 Feb 2008 Posts: 101
|
 Posted: Wed Sep 02, 2009 8:34 pm Post subject: Tripod Question: Bolt Size? |
|
 Posted: Wed Sep 02, 2009 8:34 pm Post subject: Tripod Question: Bolt Size? |
|
|
Razster wrote:
What is the bolt size that you screw into the camera?
I'm looking to buy bushings so that I can drill, screw in and mount a wooden pinhole camera, but I don't know what the size is.
I see the 1/4 to 3/8 bushings. http://www.bhphotovideo.com/c/product/221118-REG/
But is this a reducer I need for standard tripod mount?
Thanks for any help. |
|
| Back to top |
|
 |
Razster
 Joined: 05 Feb 2008 Posts: 101
|
 Posted: Wed Sep 02, 2009 8:42 pm Post subject: |
|
 Posted: Wed Sep 02, 2009 8:42 pm Post subject: |
|
|
Razster wrote:
I think I might have found my answer: http://www.sjdiscounttools.com/hel5521-6.html |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Wed Sep 02, 2009 9:20 pm Post subject: |
|
 Posted: Wed Sep 02, 2009 9:20 pm Post subject: |
|
|
visualopsins wrote:
standard 1/4-20 thread, not too long to avoid wrecking camera! _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
Farside
 Joined: 01 Sep 2007 Posts: 6579 Location: Ireland
Expire: 2013-12-27
|
 Posted: Wed Sep 02, 2009 10:34 pm Post subject: |
|
 Posted: Wed Sep 02, 2009 10:34 pm Post subject: |
|
|
Farside wrote:
The modern small thread is 1/4" Whitworth, the older Continental thread is 3/8" Whitworth.
If you have a 1/4" UNC bolt it will go in, but don't force it (or I might be thinking of 6mm).
Don't ask me why the world camera industry settled on an obsolete UK Imperial bolt size, the answer is lost in the mists of time - probably the wide base of installed equipment. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Back to top |
|
 |
Razster
 Joined: 05 Feb 2008 Posts: 101
|
 Posted: Wed Sep 02, 2009 11:06 pm Post subject: |
|
 Posted: Wed Sep 02, 2009 11:06 pm Post subject: |
|
|
Razster wrote:
Thanks!
Off to buy some threads |
|
| Back to top |
|
 |
Razster
 Joined: 05 Feb 2008 Posts: 101
|
 Posted: Thu Sep 03, 2009 5:18 pm Post subject: |
|
 Posted: Thu Sep 03, 2009 5:18 pm Post subject: |
|
|
Razster wrote:
| Farside wrote: |
The modern small thread is 1/4" Whitworth, the older Continental thread is 3/8" Whitworth.
If you have a 1/4" UNC bolt it will go in, but don't force it (or I might be thinking of 6mm).
Don't ask me why the world camera industry settled on an obsolete UK Imperial bolt size, the answer is lost in the mists of time - probably the wide base of installed equipment. |
Ok before I purchase... All Tripods and cameras are 1/4-20 as of today? I don't have a way to measure as I'm always at my office.
I just want to be sure I will be ordering the correct helicoil kit/tap.
Thank you guys for your help, I do appreciate it.
-Nate |
|
| Back to top |
|
 |
Farside
 Joined: 01 Sep 2007 Posts: 6579 Location: Ireland
Expire: 2013-12-27
|
 Posted: Thu Sep 03, 2009 11:38 pm Post subject: |
|
 Posted: Thu Sep 03, 2009 11:38 pm Post subject: |
|
|
Farside wrote:
| Razster wrote: |
Ok before I purchase... All Tripods and cameras are 1/4-20 as of today? |
Yep, that's the case, to the best of my knowledge. I've never come across any other thread, with the exception of the 3/8 option, which was /is still being used in heavier equipment. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Back to top |
|
 |
SkedAddled
 Joined: 19 Oct 2008 Posts: 1447 Location: Michigan, USA
Expire: 2021-08-12
|
 Posted: Fri Sep 04, 2009 12:32 am Post subject: |
|
 Posted: Fri Sep 04, 2009 12:32 am Post subject: |
|
|
SkedAddled wrote:
| Razster wrote: |
| Ok before I purchase... All Tripods and cameras are 1/4-20 as of today? |
MOST tripods and cameras use this standard. As Dave mentions, the larger is still in use, but normally with esoteric, heavy, or rather non-mainstream gear. Many high-end tripods still include the 1/4-20 screw as standard, while including the adaptor to also use as 3/8 if needed. _________________ Craig
Of course I'm all right! Why? What have you heard!?
Canon Digital EOS 5D Mk IV, EOS 50D, Powershot S3 iS
Vivitar 28 f/2.8 OM - Zuiko 50 f/1.8 OM - Tamron SP 28-80 f/3.5 AD2[Favorite!] - Hanimar 135 f/3.5 M42 - Soligor 135 f/2.8 T4 - Tamron SP 60-300 f/3.8 AD2 - Soligor 75-260 f/4.5 M42 - Soligor 400 f/6.3 T4 - Soligor 500 f/8 T2 Cat + Matched 2X TC - Addiction Growing!
This is us -- We drive these -- We're named these |
|
| Back to top |
|
 |
bob955i
 Joined: 15 Apr 2007 Posts: 2495
|
 Posted: Sat Sep 05, 2009 7:53 am Post subject: |
|
 Posted: Sat Sep 05, 2009 7:53 am Post subject: |
|
|
bob955i wrote:
IIRC most if not all Manfrotto tripods and heads use 3/8" - it's certainly 3/8" on my 055XPROB tripod and MN229 and MN488 heads. Some of the older Exaktas and the Mamiya RB67 also used 3/8" although in the case of those and Manfrotto heads, you can use a 3/8" male-1/4" female reducer. |
|
| Back to top |
|
 |
PaulC
 Joined: 23 Dec 2008 Posts: 2318
|
 Posted: Sat Sep 05, 2009 10:19 am Post subject: |
|
 Posted: Sat Sep 05, 2009 10:19 am Post subject: |
|
|
PaulC wrote:
It's the quick-release plate, really, not the tripod. I don't know if different size screws are available in standard plates, it would be an easy option for manufacturers. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Back to top |
|
 |
bob955i
 Joined: 15 Apr 2007 Posts: 2495
|
 Posted: Sun Sep 06, 2009 7:58 am Post subject: |
|
 Posted: Sun Sep 06, 2009 7:58 am Post subject: |
|
|
bob955i wrote:
The Manfrotto 030 hex QR plates come in both 1/4" and 3/8" versions - there's also a large square version of the 030 plate for the more well endowed camera: http://tinyurl.com/QR-plate
I don't know if their other QR plates have dual thread options though.
Speaking as a user, not a seller, of their stuff...  |
|
| Back to top |
|
 |
Farside
 Joined: 01 Sep 2007 Posts: 6579 Location: Ireland
Expire: 2013-12-27
|
 Posted: Sun Sep 06, 2009 11:00 pm Post subject: |
|
 Posted: Sun Sep 06, 2009 11:00 pm Post subject: |
|
|
Farside wrote:
Found something that states it well - http://www.enginehistory.org/british_fasteners.htm
So, 1/4" UNC will fit, no problem, but the thread angle is not the same as BSW, which is relatively unimportant in this application. The warning of doom below applies to safety-important fastenings, not camera tripods.
On the other hand; if the tripod fastening is being used a lot, premature wear of the thread might result. Your call.
It's still possible to get BSW fasteners if you look for them.
"Another area that causes confusion is the fact that some BSW or BSF nuts can be screwed on UNF or UNC bolts and vice-versa. Under NO circumstances should this practice even be considered. Most of the coarse threads share the same threads per inch which means BSW nuts can be screwed onto UNC bolts and vice-versa. The exception to this being ½ inch -- ½ inch BSW is 12 threads per inch and ½ inch UNC is 13 threads per inch. Again, it must be emphasized that this practice should not be a consideration. Whitworth and UNC/UNF thread forms differ greatly, the primarily one being the thread angle (see illustrations). BSW and BSF feature a 55 degree thread angle (47 ½ degrees for BA) and UNC/UNF threads feature a 60 degree thread angle. Consequently, if these fasteners are interchanged, considerable loss of holding force, fatigue resistance and strength will result. Unfortunately, this author has seen examples of mechanics -- unaware the these subtleties -- mixing fasteners at will -- gee, if it screws on it must be okay..!! (Scary thought). _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Back to top |
|
 |
Seele
 Joined: 17 Apr 2009 Posts: 746 Location: Sydney Australia
|
 Posted: Mon Sep 07, 2009 7:30 am Post subject: Re: Tripod Question: Bolt Size? |
|
 Posted: Mon Sep 07, 2009 7:30 am Post subject: Re: Tripod Question: Bolt Size? |
|
|
Seele wrote:
Nate,
| Razster wrote: |
What is the bolt size that you screw into the camera?
I'm looking to buy bushings so that I can drill, screw in and mount a wooden pinhole camera, but I don't know what the size is.
I see the 1/4 to 3/8 bushings. http://www.bhphotovideo.com/c/product/221118-REG/
But is this a reducer I need for standard tripod mount?
Thanks for any help. |
If you are building a wooden camera from scratch get "T-nuts" with the 1/4 Whitworth thread.
A T-nut is a threaded sleeve into which the screw fits, and it has an integral flange at the end, and the flange has four spikes for stopping it from rotating.
So, on the base plate you drill a hole that allows the "sleeve" to go right through, and use an auger bit the same diameter of the flange to make a recess for the flange to sit in. Make sure that when the T-nut is fitted, its end just falls short of being flush with the base surface. Use a small drill to drill holes for the spikes to locate themselves. Of course, you would need to add another piece of material on top of the T-nut to stop it from falling into the camera.
The Bender self-assembly large format camera kit includes such T-nuts but I get them from the local hardware store without trouble. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|