MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Tripod leg warmers
View previous topic :: View next topic  


Reply

My new tripod (Red Snapper RSF-284) only has one foam covered leg, with winter coming I wanted more than that.
Luckily there's a plumber working on my house renovation job who happily parted with a bit of foam lagging.
Job done. Cool


#1


I unscrewed the legs and twisted the foam into place, this way I didn't have to apply lots of tape to keep it in place. It's a nice tight fit and dirt cheap if I happen to damage any of it. Tripod foam costs way too much so this is a good alternative for those on a budget.


Reply

If you slipped some electrical heat shrink over that, hit it gently with a hot air gun, it would cover the foam nicely.


Reply

Lloydy wrote:
If you slipped some electrical heat shrink over that, hit it gently with a hot air gun, it would cover the foam nicely.

Thanks for the tip, sounds like a good idea.


Reply

Eeee... sheer bloody luxury, is that. On second thoughts, handling of ice-cold metal has never been my favourite pastime.


Reply

Farside wrote:
Eeee... sheer bloody luxury, is that. On second thoughts, handling of ice-cold metal has never been my favourite pastime.

'tis top of the range, Manfrotto and Giottos will be fighting to steal this idea very soon. Wink


Reply

I miss the point here.


Reply

philslizzy wrote:
I miss the point here.

Those legs get very cold to the touch in winter, sucking the heat from my poor hands. This provides some insulation plus it's a lot easier to grip when my fingers inevitable start to go numb.


Reply

I wear gloves.


Reply

With the fingertips cut off.


Reply

I suffer from Raynaud's 'disease' so if I take off gloves at certain temperatures I'll be in trouble and the day is ruined.
I've tried fingerless gloves and gloves which having folding fingertips, can't use either.
This winter I'll be trying hand warmers in my gloves, small packets which heat up and stay 'hot' for 6-8 hours. It would be nice to make it through winter without the dreaded white fingers. Smile


Reply

How cold you have there?
Below 0 C? Winds?


Reply

kansalliskala wrote:
How cold you have there?
Below 0 C? Winds?

We can reach -20 C during a bad winter, but it's more likely to be -10. I have problems with white fingers below +10 Sad


Reply

One other option that works well is to use inner tubes from bike tires. They come in different sizes so depending on the type of tripod or monopod you have you'll likely be able to find a size that fit.

While they don't offer the same insulating qualities as the foam, they are more durable and don't increase the bulk of the tripod. Slipping them on may be a bit tricky at first. It's kinda like a the same action as putting on a really big condom. If you have trouble guys, try turning off the lights.