| View previous topic :: View next topic |
| Author |
Message |
philslizzy
 Joined: 07 Aug 2012 Posts: 4753 Location: Cheshire, England
|
 Posted: Sun Nov 24, 2013 11:36 pm Post subject: Mains cables for Bowens Monolites? |
|
 Posted: Sun Nov 24, 2013 11:36 pm Post subject: Mains cables for Bowens Monolites? |
|
|
philslizzy wrote:
Where can you get them? old 1980's or 1970's lites have a 3 pin plug. I had some years ago and there are a couple going cheap. the socket looks like this and my drawing of the plug.
edit: plug is nothing like it. I remember it had 3 hollow pins _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official.
Last edited by philslizzy on Tue Nov 26, 2013 8:03 pm; edited 1 time in total |
|
| Back to top |
|
 |
Lloydy
 Joined: 02 Sep 2009 Posts: 7880 Location: Ironbridge. UK.
Expire: 2022-01-01
|
 Posted: Mon Nov 25, 2013 12:31 am Post subject: |
|
 Posted: Mon Nov 25, 2013 12:31 am Post subject: |
|
|
Lloydy wrote:
what diameter is it Phil ? I think there's a box of old plugs at the back of my shed. It's probably easier to change the plug and socket to the kettle / PC power lead type. Everyone's got spare leads lying around for those. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Back to top |
|
 |
philslizzy
 Joined: 07 Aug 2012 Posts: 4753 Location: Cheshire, England
|
 Posted: Tue Nov 26, 2013 12:12 pm Post subject: |
|
 Posted: Tue Nov 26, 2013 12:12 pm Post subject: |
|
|
philslizzy wrote:
I'm thinking that but it could be a costly investment if I cant. The plug appears to be a bulgin 3-pin type. Unfortunately I dont have the lights with me so I cant tell you the diameter.
This is the type of light and a better picture of the socket.
The plug pins appear to be hollow with contacts inside. I hoped it may be a Bulgin type but cant find anything online. There appears to be a stylised 'B' at the bottom of the socket. That probably is a Bowens mark, rather than Bulgin. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Back to top |
|
 |
Lloydy
 Joined: 02 Sep 2009 Posts: 7880 Location: Ironbridge. UK.
Expire: 2022-01-01
|
 Posted: Tue Nov 26, 2013 2:52 pm Post subject: |
|
 Posted: Tue Nov 26, 2013 2:52 pm Post subject: |
|
|
Lloydy wrote:
Get 'messin' Phil, the chances of finding those old leads are pretty poor. If you change them for 'kettle sockets' then new ready made leads are easy to find, as are extensions with the right plug and sockets.
Use a big fused one like this -
http://www.ebay.co.uk/itm/Fused-IEC-Chassis-Mains-Kettle-Socket-/300959366179?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item4612937c23
and you will probably be able to modify the existing hole, the smaller unfused ones might need a bit of thin metal plate to cover the oversize hole. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Back to top |
|
 |
Excalibur
 Joined: 19 Jul 2009 Posts: 5018 Location: UK
Expire: 2014-04-21
|
 Posted: Tue Nov 26, 2013 4:21 pm Post subject: |
|
 Posted: Tue Nov 26, 2013 4:21 pm Post subject: |
|
|
Excalibur wrote:
Is this any good, but the pin spacing is equal.
http://www.ebay.co.uk/itm/Bulgin-3-Pin-Cable-Line-Socket-Female-PX0430-SE-250Vac-1-5A-Fits-PX0429-2610-/141100800814
or mod it to this:-
http://www.adverts.ie/camera-accessories/bowens-monolite-400-e/255083 _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Back to top |
|
 |
philslizzy
 Joined: 07 Aug 2012 Posts: 4753 Location: Cheshire, England
|
 Posted: Tue Nov 26, 2013 8:05 pm Post subject: |
|
 Posted: Tue Nov 26, 2013 8:05 pm Post subject: |
|
|
philslizzy wrote:
I dont think so. I may just take the plunge and buy. Perhaps I can adapt. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Back to top |
|
 |
pentaxpete
 Joined: 02 Dec 2011 Posts: 697 Location: BRENTWOOD England
|
 Posted: Wed Nov 27, 2013 9:40 am Post subject: |
|
 Posted: Wed Nov 27, 2013 9:40 am Post subject: |
|
|
pentaxpete wrote:
I have a couple of the SAME FLASHES but I need the mains leads! I have an address for BOWENS and another flash repairer here in England : Bowens 355 old Road CLACTON C015 3RH Tel : 01255 422807
OR Denis Willing 01223 845205 ( Great Sheldon, Cambridgeshire) Hope these are still 'LIVE' contacts regards -- Peter _________________ Long Live REAL PHOTOGRAPHY ! |
|
| Back to top |
|
 |
twinquartz
 Joined: 11 Jun 2012 Posts: 316 Location: Sweden
Expire: 2013-10-29
|
 Posted: Wed Nov 27, 2013 6:23 pm Post subject: |
|
 Posted: Wed Nov 27, 2013 6:23 pm Post subject: |
|
|
twinquartz wrote:
In case you have to re-plug it, would this schematics be of assistance?
http://static.photo.net/attachments/bboard/00V/00VsuN-224683584.jpg |
|
| Back to top |
|
 |
philslizzy
 Joined: 07 Aug 2012 Posts: 4753 Location: Cheshire, England
|
 Posted: Wed Nov 27, 2013 8:30 pm Post subject: |
|
 Posted: Wed Nov 27, 2013 8:30 pm Post subject: |
|
|
philslizzy wrote:
| pentaxpete wrote: |
I have a couple of the SAME FLASHES but I need the mains leads! I have an address for BOWENS and another flash repairer here in England : Bowens 355 old Road CLACTON C015 3RH Tel : 01255 422807
OR Denis Willing 01223 845205 ( Great Sheldon, Cambridgeshire) Hope these are still 'LIVE' contacts regards -- Peter |
Hi Pete I'lll give it a go tomorrow and let you know. Cheers
Perhaps not, in this case, I will print it out though in case I need to make incursions! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Back to top |
|
 |
Farside
 Joined: 01 Sep 2007 Posts: 6579 Location: Ireland
Expire: 2013-12-27
|
 Posted: Thu Nov 28, 2013 12:14 am Post subject: |
|
 Posted: Thu Nov 28, 2013 12:14 am Post subject: |
|
|
Farside wrote:
Here you go...
http://bulgin.co.uk/Products/GenPurpose_Connectors/GenPurpose_Connectors.html
edit.
Actually no; there's a keyway in this one, which is likely an updated 'safer' version of yours. At the very least it gives you a choice of replacing the plug+socket with a modern type that looks just like the old one and retains originality/size instead of butchering the front panel for an IEC connector. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Back to top |
|
 |
philslizzy
 Joined: 07 Aug 2012 Posts: 4753 Location: Cheshire, England
|
 Posted: Thu Nov 28, 2013 12:37 am Post subject: |
|
 Posted: Thu Nov 28, 2013 12:37 am Post subject: |
|
|
philslizzy wrote:
I got excited for a moment then I wondered why the keyway. I remember you could only put the plug in one way on the bowens - heres why:
left: Bowens right: Bulgin _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Back to top |
|
 |
Excalibur
 Joined: 19 Jul 2009 Posts: 5018 Location: UK
Expire: 2014-04-21
|
 Posted: Thu Nov 28, 2013 2:44 pm Post subject: |
|
 Posted: Thu Nov 28, 2013 2:44 pm Post subject: |
|
|
Excalibur wrote:
| Farside wrote: |
Here you go...
http://bulgin.co.uk/Products/GenPurpose_Connectors/GenPurpose_Connectors.html
edit.
Actually no; there's a keyway in this one, which is likely an updated 'safer' version of yours. At the very least it gives you a choice of replacing the plug+socket with a modern type that looks just like the old one and retains originality/size instead of butchering the front panel for an IEC connector. |
That must be the most stupid plug to connect from a 230v mains supply......the person who designed that was an idiot  _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Back to top |
|
 |
Farside
 Joined: 01 Sep 2007 Posts: 6579 Location: Ireland
Expire: 2013-12-27
|
 Posted: Mon Dec 02, 2013 2:32 am Post subject: |
|
 Posted: Mon Dec 02, 2013 2:32 am Post subject: |
|
|
Farside wrote:
What I often do in these situations is simply add flylead with an inline socket on it, in this case, do away with the hard-to-find Bulgin entirely and use an IEC flylead socket.
It's always possible to make a safe cable exit from the equipment, using grommets and cable relief/grippers from the many dozens lying around in sparks' workshops. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Back to top |
|
 |
philslizzy
 Joined: 07 Aug 2012 Posts: 4753 Location: Cheshire, England
|
 Posted: Mon Dec 02, 2013 11:02 am Post subject: |
|
 Posted: Mon Dec 02, 2013 11:02 am Post subject: |
|
|
philslizzy wrote:
The flylead was the final option - but as the lights are no no longer available this is all rather academic.
Thanks all of you for your input.
I will search for old ones now knowing I can use them. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|