MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Can you guess what it is, yet? (Technika III)
View previous topic :: View next topic  


Reply


(Title amended for search engine)


Last edited by Farside on Tue Nov 19, 2013 11:43 pm; edited 1 time in total


Reply

9x12 Linhof Technika?

I am thinning out my LF lens collection shortly, as i have some that won't cover 5x7 and aren't suitable for 6x9 either, so I might have something that would be ideal for 9x12.


Reply

Yep; a Tech III model 4 (although this designation is entirely unofficial) which probably puts it around 1953 iirc. I'll drop Bob Salomon or Linhof a query about dates.
The 9x12 back slashed the asking price dramatically, but I already had a Tech IV 4x5 back which fits it lovely. Also, the seller had it listed as the Tech Press, which I knew it wasn't - I've already got the earlier T3 Press and the front standard is totally basic, unlike this. The previous owner had left a Press lensboard in place and of course, it has "Standard Press" writ large on it, leading to the confusion.


Reply

Progress, of a sort.
I have a very nice, pristine condition, 1930 15cm / 4.5 Xenar in Compur rim-set shutter that fits the supplied lensboard nicely. The T3 came with a rangefinder cam that was machined to match the original lens supplied with the camera, another Xenar, but of 1950 vintage. Of course, it would be too much of a coincidence that one could work with the other, and so it proved. At some point I will modify this cam or cut a new one, once I suss them out more closely. However, the scale focusing works well and someone has already done a lot of work on this, putting a line of indent stops underside of the scale insert, one of which nicely matches the 1930 lens and allows the scale to slide to a perfect position aligned with that.
I had a slight concern that the change of backs would affect registration, but that was unfounded. Nothing's changed there.


Reply

I happen to have four 150mm lenses:

Schneider Symmar 5.6/150
Schneider G-Claron 9/150
Rodenstock APO-Gerogon 9/150
Staeble Repromaster 9/150

The Symmar doesn't quite cover 5x7, fits a #1 shutter. The other three are very similar, process lenses that will amply cover 5x7. The G-Claron is in a #0 shutter, the other two won't fit a shutter so I have to use them front-mounted on a #1 shutter.

Obviously, I don't need all four of them. My plan is to shoot the three 9/150 process lenses on my 5x7 camera and chose which one is the best for my purposes. Once I've worked that out, I'd be happy to part with one, I didn't pay very much at all for them so I'd be happy to take what I paid for them.

I also found a Goerz Dogmar 165mm in my stash of LF lenses, it's old and uncoated but the glass is in great shape. Sadly it doesn't cover 5x7, it was for the obsolete 10x15cm format so just and so fails to cover 5x7. I don't think the cells are a direct fit to a #0 shutter, but I'll check. The Dogmar is a 4/4 dialyte type so will be sharper than a Tessar or Xenar but lower contrast.

I never use the rf on my Graflex, I just use the ground glass and a loupe, that way I'm 100% sure the focus is correct.


Reply

Thinking on it, it's just as likely it was a Symmar as OE on this - the serial number matched the yearly number for Schneider but there was nothing to say it was particularly either one. Given the RF discrepancy I suspect my assumption of a Xenar is way off.
I'd like to get this RF dialled in properly, as it's one of the best Kalarts I've seen - once again, there's evidence this camera was serviced and maintained properly over the years. It's either not had a very hard life or was simply kept up to snuff whenever anything got worn or bent. Money has been spent on it by the PO.


Reply

If the RF is off by a lot then maybe it had a 135mm lens on it originally? a 135mm Xenar wouldn't cover 4x5 but a 135mm Symmar would.


Reply

The coupling cam is stamped with the camera serial no and the lens FL/serial no at the top/bottom respectively.
The cams are removeable, but it's such a pita to do that, I'd never bother. I wonder if the later ones were easier.


Reply

And it has 150mm stamped on the cam?


Reply

iangreenhalgh1 wrote:
And it has 150mm stamped on the cam?

Yes. I just had a closer look and found there's an undercut wedge shape to the end of the cam where it sits in the body-side holder. Same idea as a cold-shoe. It's not been out for years, so it was a bit stuck, but it came out with a proper pull (reluctant to force anything that doesn't want to move). It's actually easy to change cams.
The difficulty with the early Techs is the body, lens and cam were all matched and to introduce another lens requires new matching cam to be made. Some have reported pure luck in finding a match and I'm hopeful of that. Failing that, I'll modify an existing one.


Reply

Maybe it had a 150mm Heliar? Heliars are a bit telecentric so the back focus is a bit shorter.


Reply

A major stride of progress today.
The top rail has notches for previous lenses (later Techs had infinity stops on the rails, but the early ones required a notch to be filed) and at the 150mm position there are three notches, two of which were filled in with some sort of resin. Obviously, they speak of the history and over the course of years the user has changed his standard lens and had filled in the unused positioning notches. Reasoning there was a good chance of one of these old notches matching the Xenar, I dug out the resin and tried it.
Bingo.
The front notch of the three makes the groundglass image and the RF match not-quite-perfectly but very very close indeed, and if I pull the focus scale forward a detent, it matches too. I shall test it out for longer distances tomorrow in the daylight as I've only been able to see it indoors at 3ft, 10ft and 15ft. Makes me wonder how universal the RF cam actually is - I suspect this might be the original cam for the camera/lens matched by the factory when it was new, but who knows for sure. If this cam matches the Xenar at all distances, and it also turns out to match another 150mm lens (I hope) within acceptable tolerance, then I'll be happy enough.
I have an S-K Symmar-S 135 on the way, with another random 135 cam, which is not a match for it, so I might have to get into some cam-modifying yet.