MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Scanner for medium format?
View previous topic :: View next topic  


Reply

What scanner do you use for medium format film? Samples are welcomed


Reply

Epson V500 all of my scan 35mm and 120 both made with that.


Reply

yinyangbt wrote:
What scanner do you use for medium format film? Samples are welcomed



35mm is the problem, but with MF film you can go as low as an old Epson 4180 for £15 and get good results..but the more expensive new V500 should be better esp if you want to do 35mm later on.


Reply

For MF, I use a 4490 and for LF an older 2450, both adequate for what I need them for.


Reply

@farside:
Is it possible change the light on the 4490?


Reply

I have experience with Epson v500- it does not have very good dynamic range. Sharpness also doesn't look very good especially with the factory holders.

It looks OK for 6x6 or 6x9 but the 35mm results are quite poor - especially if you scan slides.
I'm thinking of replacing mine with 4990 which should be better and also has bigger area for scanning film.


Reply

std wrote:
I have experience with Epson v500- it does not have very good dynamic range. Sharpness also doesn't look very good especially with the factory holders.

It looks OK for 6x6 or 6x9 but the 35mm results are quite poor - especially if you scan slides.
I'm thinking of replacing mine with 4990 which should be better and also has bigger area for scanning film.

I am interessed only for 6x6 results.
For 35mm I have the Minolta Dimage III that I use with very good results and give me 11.5 MP from a 35mm frame wich is absolutely sufficient


Reply

I've done it !
Epson 4780 , Dmax 4.0 rated at real resolution 1800-2000 dpi for 130 E .
Does somebody have some samples with this one ?


Reply

This should be better than V500.
What is the max size of the scan area?
You may want to purchaise glass for keeping the film flat. A member Axer was seling those if i remember correctly.


Reply

std wrote:
This should be better than V500.
What is the max size of the scan area?
You may want to purchaise glass for keeping the film flat. A member Axer was seling those if i remember correctly.

5x4 inches is the biggest holder.
I won the auction last night ,just have to pay and wait to receive the package .
Meantime I succeeded to load with Kodak 400CN the Pentacon six and Agfa Isolette Wink


Reply

std wrote:
This should be better than V500.
What is the max size of the scan area?
You may want to purchaise glass for keeping the film flat. A member Axer was seling those if i remember correctly.

+1 scanassist.org


Reply

ellepi wrote:
@farside:
Is it possible change the light on the 4490?

Do you mean put a different light on it, or repair it when it breaks?
I honestly don't know - if it's in transparency scan mode I don't suppose it cares what light is above it and if it ever breaks I'll put a fluorescent tube box above it as a toplight anyway (as I used to do with an old scanner) and adjust any colour issues in Photoshop.