MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Scanning 4x5 film on a V500
View previous topic :: View next topic  


Reply

In theory, you can't scan 4x5 on anything cheaper than the 700 series. However, in practice you can. Just lay the neg on the glass under the medium format holder, scan one half of it, then move it across a bit and scan the other half. Open in photoshop and use the automatic stitching program to join the two bits together. Since the two halves make an absolutely perfect match, PS doesn't have any trouble rejoining them. You just need to have enough RAM to handle the file size.

Here's one I did earlier: http://fotoblogzone.com/2011/10/12/4x5-scans-on-an-epson-v500/


Reply

excellent!


Reply

On a related note, has anyone tried scanning film with a DIY backlight, e.g. a lamp shining through a diffused sheet of glass placed on top of the film?


Reply

Arkku wrote:
On a related note, has anyone tried scanning film with a DIY backlight, e.g. a lamp shining through a diffused sheet of glass placed on top of the film?


No , but probably works also well if strong enough and cover all area.


Reply

Arkku, I have. It is terrible. The problem I ran into is that the light was unevenly distributed and the results showed in the negative. Basically, it looked like I had scanned a flashlight face through a piece of cheesecloth. I suppose that with a more careful setup, perhaps a custom made box with multiple fluorescent lights and a very neutral translucent diffuser, the results would have improved.


Reply

David wrote:
Arkku, I have. It is terrible. The problem I ran into is that the light was unevenly distributed and the results showed in the negative. Basically, it looked like I had scanned a flashlight face through a piece of cheesecloth. I suppose that with a more careful setup, perhaps a custom made box with multiple fluorescent lights and a very neutral translucent diffuser, the results would have improved.

ooh, so this is not really works.


Reply

Hmm, I might still give it a try with 4×5 some day, even though I'm not expecting much… I have an idea that maybe if I were to scan the same setup without any film in it, I could use that as a background correction image to even out the light.


Reply

PaulC wrote:
In theory, you can't scan 4x5 on anything cheaper than the 700 series. However, in practice you can. Just lay the neg on the glass under the medium format holder, scan one half of it, then move it across a bit and scan the other half. Open in photoshop and use the automatic stitching program to join the two bits together. Since the two halves make an absolutely perfect match, PS doesn't have any trouble rejoining them. You just need to have enough RAM to handle the file size.

Here's one I did earlier: http://fotoblogzone.com/2011/10/12/4x5-scans-on-an-epson-v500/



I did that for a friend who wanted a big glass negative scanned. I used my Epson 2450. This scanner can make really big negative or slide scans, but that glass plate was just to big, even for the 2450. So I scanned it in two portions and put the together in Photoshop. Worked perfecty.

Klaus


Reply

Great idea !


Reply

I'm trying hard not to buy into any other systems let alone formats. Laughing


Reply

Arkku wrote:
On a related note, has anyone tried scanning film with a DIY backlight, e.g. a lamp shining through a diffused sheet of glass placed on top of the film?

I was doing this a couple of years ago - I bought a tabletop flat slide/neg viewer (almost A4 size) and placed it upside down on the neg and ran the scanner. It worked, up to a point, but I could never get the colours from negs to come right and contrast was a bit (a lot) off. Otoh, I've seen passable results from such a setup and it can work in mono with a bit of jigging around.