Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

minimal
View previous topic :: View next topic  


PostPosted: Mon Dec 13, 2010 4:23 pm    Post subject: minimal Reply with quote

nikon fe2, nikkor 50/1.8, d-76 1:1, epson 4490:
















FED-2, I-61 (thanks again, ludoo), same film, development:


PostPosted: Mon Dec 13, 2010 4:36 pm    Post subject: Reply with quote

My faves are 5 and 6 --- on 6 there's a little line of Newton rings across the frame


PostPosted: Mon Dec 13, 2010 4:48 pm    Post subject: Reply with quote

thanks, jussi.

i have noticed that line as well. it shows up occasionally. i have no idea why it would. i use the plain neg holder that came with ther scanner.


PostPosted: Mon Dec 13, 2010 4:53 pm    Post subject: Reply with quote

Paul, if the film has a bow to it, and the bow faces down, it may contact the scanner glass. Not that it doesn't have downsides, turning the film around so it bows up fixes that - possibly at the expense of sharpness


PostPosted: Mon Dec 13, 2010 5:06 pm    Post subject: Reply with quote

Interesting set with lovely textures. I particularly like the end of the post (no 5 I think).

K.


PostPosted: Mon Dec 13, 2010 5:25 pm    Post subject: Reply with quote

4490 has terrible holder for 35mm (same as V500), you need to force film in negative direction. but not alone! put it in some archival sheet and the force it to opposite way than its "rounded" for several seconds. be careful to not broke it. after those few seconds, you have limited time to make scan without newton rings. other way is use different method of holding, there are also of course anti newton ring glasses available on the internet.

and pictures: very good, i like those minimal compositions.


PostPosted: Mon Dec 13, 2010 6:23 pm    Post subject: Reply with quote

#2 for me, looks like an uncommon setting for such a subject


PostPosted: Mon Dec 13, 2010 6:27 pm    Post subject: Reply with quote

Numbers 3 and 5 most definitely need cropping to improve them. Left and right respectively.
Try it


PostPosted: Tue Dec 14, 2010 12:26 pm    Post subject: Reply with quote

thank you all so much.

but trev, that would put the subjects in the middle! horrors! Wink

by the way, the kentmere will be perfectly flat after pressing for a day or so. still, i might order myself one of those fancy holders ...


PostPosted: Tue Dec 14, 2010 12:35 pm    Post subject: Reply with quote

i like that grain!!


PostPosted: Tue Dec 14, 2010 1:43 pm    Post subject: Reply with quote

thank you. me too!


PostPosted: Tue Dec 14, 2010 9:58 pm    Post subject: Reply with quote

Nice shots, really like the post Smile


PostPosted: Thu Dec 16, 2010 1:54 pm    Post subject: Reply with quote

thanks, g.


PostPosted: Thu Dec 16, 2010 4:12 pm    Post subject: Reply with quote

That's a great series!


PostPosted: Thu Dec 16, 2010 4:28 pm    Post subject: Reply with quote

thank you, Carsten ...


PostPosted: Sun Dec 19, 2010 6:31 pm    Post subject: Reply with quote

the topic-name perfectly describes the photograph!

I love the dynamic in the grey-tones. Striking whites.

Cheers
Tobias


PostPosted: Sun Dec 19, 2010 6:52 pm    Post subject: Reply with quote

thank you much, Tobias.