MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Nikon fans: Nikon F series, Nikkormat or FM?
View previous topic :: View next topic  


Reply

I have decided to sell all of my M42 stuff, and an RF or two to fund purchase of a Nikon SLR and a lens or two.
The key reason is this: it is very easy to find, buy and install corrective eyepieces for Nikons. I have excellent vision from 4 feet out. Why bother with reading glasses to focus when I don't have to do so?
I have been perusing ebay for possibilities. I am amazed at how low the prices are for Nikkormat FTNs is really good shape. FMs are available at good prices, too. I am somewhat familiar with the Nikkormat. I know it is Jeep of a camera. I have not handled an FM; I just know it is more compact and lighter weight, but still heavy enough to help dampen hand tremors.
A DSLR is not in my near future; future lens compatibility is not an issue. But cost is. Who wouldn't want an F, with plain prism? But good grief, they are precious to their owners!
So, Nikon fans, which one would you go for? Am I missing an option?
I lately have learned the F3hp is in the upper end of my price range. It has a plethora of screen options, as well as corrective eyepiece lens availibility ...


Last edited by fish4570 on Wed Sep 15, 2010 3:29 am; edited 1 time in total


Reply

I'd have another Nikkormat FT2 in a heartbeat. Only thing I've heard about them with the passage of time, is the resistor that's coupled to the aperture setting ring can go awol and is awkward to get to.
Cracking little camera though.


Reply

Resistor for metering system?


Reply

I don't see an advantage to a FM over a FE. However, someday I'll end up with a Nikkormat, just to Recapitulate Ontogeny, i.e. mom brought back a Nikkormat with I believe a Nikkor micro (as I remember her saying stuff about micro lenses being better than regulars) in '65 or thereabouts, from Tokyo.

It's really a matter of taste - the FE/FM are smaller while the Nikkormat is larger, and you need to do the f/5.6 + rotate left, rotate right routine to register the lens. As long as the rabbit ears are in place. I don't think you'd go wrong with either. Myself being a bottom fisher and a vintage buff, I know there's a Nikkormat in my future. Most of my Nikkors have the ears, and the ones that don't I'll add them. Some Day.

Coming from an OM and then Pentax background, the FE is superb. I suppose a fully manual, not electronic, shutter can be an advantage.

In the screw mount world, I find I like the bulbous Yashica TL Electro-X due to its size. I don't have big hands by any means, but the size just works. This is something I wouldn't have expected, it has something to do with where the fingers go.

I really do like the FE, but as I say, I will someday get a Nikkormat of some vintage, or perhaps a non metered F. I'm going to research Nikon DSLR backward compatibility - I hope there's full frame Nikons that are actually backward compatible.


Reply

fish4570 wrote:
Resistor for metering system?

Yeah, that's it. I think it's a major stripdown to get to it and it's not a simple resistor, being more of a custom-made resistance track, iirc. I doubt if spares are available.
What works in our favour, of course, is that it's likely that even many a 40yr old camera has had very little use in real terms.


Reply

The corrective eyepiece is the thing for which ever I end up buying.
I am a "bottom fisher and vintage buff," too ...


Reply

Paul, you might want to do some research before making a camera change.

An example my Yashica Elctro X (M42) appears to take the exact same size vision diopter as my Canon AT-1.
I need a battery for my caliper so I can't get an exact measurement.


Reply

Walter, I have looked high, low and in-between for Spotmatic and Fujica eyepiece diopters. I have seen articles on how to make them from cheap reading glasses for a press fit, but I do not have the micromotor skills to do it right. I'd just as soon unscrew an eyepiece, and screw on a corrected one: voila!
But I do appreciate your advice, and if you are on to something, please let me se ... Cool


Reply

Paul what I'm saying is My Yashica and Canon should take the same slide on diopter.
Get a forum member to measure his Nikon it might take the the same size diopter as one of your cameras.


Reply

Could be ...
Anybody out there have such a slide-on diopter?
Question


Reply

for what it's worth, Pentax and Nikon - the non round viewfinder exit Nikons - can share eyepiece accessories. I have a Nikon magnifying eyepiece on my K100D, and I have a K100D eyepiece on one of my Spotmatics. In general it seems many of the rectangular viewfinder exit cameras can possibly share eyepiece bits.


Reply

I have a Canon F-1 (round eyepiece) and Canons with square eyepieces. The Canon square eyepiece dimensions are close to those of the Pentax, but not close enough where they can be interchanged, I don't think. The F-1's round eyepiece is a different size from the Nikons'. Wish it weren't.

One of the nice things about the Nikons, eyepiece-wise, is their interchangeability. If you do a search on eBay for, say "FE eyepiece" you'll get hits on auctions and BINs for eyepieces that are said to fit everything from a Nikkormat to an FE2. I think even the F3 w/o the HP finder will take this eyepiece size.

Also if you do this eBay search, you'll notice that there are lots of eyepiece diopters available for Nikon in various strengths, although the farsighted ones are much more common than the nearsighted ones (obviously the reverse of demand Smile ).

I recently added an FE to my Nikon system. For years, all I've owned has been an F2 with DE-1 non-metered finder, and I love that camera. But I've also always liked the FE and finally bought another one (I've owned many Nikons cuz I was a camera dealer years ago). I much prefer the FE over the FM for several reasons. To me, the electronic shutter is not an issue. Those button cell batteries last for years and are easy to find. But an FE has interchangeable focusing screens and match needle metering -- two features that the FM lacks and which I much prefer. In fact, I just replaced the standard screen in the FE with an E2 screen -- plain matte with grid, originally for an FE2, so it's brighter than the standard FE screen. I prefer plain matte screens when I'm using macro lenses with extensions or long telephotos that are slower than f/4, cuz the microprisms are pretty much useless past f/4. Another thing to consider, since the FM's screen is not interchangeable.

I also like the Nikkormats. The FT2 is basically an FTN with a hot shoe. Both are great cameras and I recommend them over the FT because they have Nikon's traditional 60/40 metering pattern, whereas the FT predates this and does not have the same center-weighting. A disadvantage to the Nikkormats is lack of interchangeable focusing screens and no motor option.

The Nikkormats use the same sort of meter resistor that the F and F2 use -- it's a ring inside the camera that tends to wear out after a while. They are NLA from Nikon, but if you do a google search, you will find folks who can do the replacement. It isn't a cheap repair, though. Likely it'll cost you several times what you paid for the Nikkormat body. One of the things I've always liked about the Nikkormat is the little external window for the meter (the F and F2 have them too), which is handy for meter adjusting when your eye is away from the eyepiece, as in macro or copy work.


Reply

Okay I thought I'd add to this discussion with some actual measurements. I've measured the eyepiece dimensions of my Canon AE-1 Program and my Pentax KX. The Canon's eyepiece size is the same as all A-series Canons and probably even more than that, and the KX's eyepiece size is the same as the Spotmatics and the M-series Pentaxes (or at least some of the M-series; I have an MV here and its eyepiece size is identical to the KX's).

It would appear that the Canon and Pentax eyepeice accessories will interchange. Here's the numbers:

Canon AE-1P: 0.930" x 0.650" and the slot is 0.710 " wide. Metric would be 23.6mm x 16.5mm with a 18mm wide slot.

Pentax KX: 0.950" x 0.640" and a 0.710" wide slot. Metric would be 24mm x 16.3mm with a 18mm wide slot.

The eyepieces are shaped differently, though. The Canons are rectangles whereas the Pentaxes are more barrel-shaped, with a curve along their length. Does this matter? I can't say.

The 18mm slot size is a pretty common one I believe. A lot of DSLRs have this slot size.

I got curious and so I measured the eyepiece dimensions on my EOS XS (1000D). Guess what? It's the same as the A-Series Canons. So this means that eyepiece accessories for the compact Canon DSLRs (and maybe some of the larger ones too?) should work with the above two camera series as well.


Reply

Michael, thank you so much.
The body issue is going to be settled shortly. Someone is sending me an FE2 body to try, so I will be on the hunt fior a suitable lens ...


Reply

Cool. If you're at all like me, you're gonna fall in love with that FE2. It's one sweet camera.


Reply

Jussi, what kind of magnifying eyepiece? +1? +2? Like for macro work, or normal shots?


Reply

http://www.bhphotovideo.com/c/product/407315-REG/Nikon_25339.html
http://www.bhphotovideo.com/c/product/469574-REG/Pentax_30150.html

The rectangular Nikon diopters should fit Pentax as well, as the magnifying eyepiece does.
http://www.bhphotovideo.com/c/search?ci=286&N=4288586736+4291315846


Reply

Actually, you got me thinking. I'll see about trying the Nikon bit on a Spotmatic, what difference it may make. The magnification is not all that great - 1.2 or thereabouts, too lazy to actually look this up...

BTW: though the APS-C size view finder image is obviously smaller, a K100D or similar is a) heavy b) has built in diopter correction c) has body based shake reduction and c) with the screw adapter works well with screw mount lenses. And you don't pay for film + developing + crappy scans. ... I know it ain't film, and all that, and I don't actually use mine any more than any single film camera... but just a thought. KEH prices for the K100D are creeping into the low $200 range, should be able to do better via the other channels... after selling your stuff and buying the Nikon and a couple additional Nikkors, might you not actually be far off?


Reply

I appreciate all of that work, Jussi. Those are some interesting gimcracks ...


Reply

Paul, obviously I'm deriving my own benefit from all this as well, as we have kindred interests and limitations...


Reply

fish4570 wrote:
Michael, thank you so much.
The body issue is going to be settled shortly. Someone is sending me an FE2 body to try, so I will be on the hunt fior a suitable lens ...


Paul, is there someone else sending you an FE2? Unless I haven't been keeping up with the PMs, you left it hanging as a wait n see. Work has
been busy, but finally finished a roll through my Agfa Synchro Box 6x9:



camera resting on the ledge of one of those columns and hey, no problem with shake or missed focus... Laughing

Arista 100/D-76, 1:1, 9 mins, 20C


Last edited by Katastrofo on Mon Sep 20, 2010 4:55 pm; edited 1 time in total


Reply

That is a way cool shot, Bill.

And I forgot about your offer of an FE2. Yes, an RFF member is sending me a body for free. I hope you are not insulted by my forgetfulness. If not, I apologize anyway. Embarassed

Have you a Nikon normal lens you'd swap me for my good Super Takumar 55/2?


Reply

Paul, I have the 1.8/50 Nikkor prime plus there's a Soligor CD zoom I'm
not using.


Reply

What do you want for the prime? It is Ai/Ais, right?
My M42 Takumar and some boot?
Cash only?
By the way, I will be in Decatur this weekend. Coffee?


Reply

Paul, yes, Ai/AIS for the 50 prime. No money, I'll take the Tak, and what
time and where will you be in Decatur? Send me a PM, thanks.