 Posted: Thu Nov 12, 2009 10:57 pm Post subject: Home -made Novoflex PK adapter |
 |
|
Farside wrote:
Take one of these, a used Novoflex COA (M42) adapter, costing around €20...
Add one of these, a cheapy M42->PK ring with flange,costing €5...
Put some low-strength Loctite in the threads and let cure for 10 minutes on top of a heater.
Then adjust the three retaining screws to align the lens to the camera and you end up with this, costing about €25, instead of the Novo one which costs €70. Just pretend, for a moment, the camera is a Pentax 
If you ever have to take it apart, the Loctite will degrade with heat, so boil it in a pot.
_________________
Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop EU
http://www.fomafoto.com/ |
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
