MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Better focusing with standart focusing screen on 350D
View previous topic :: View next topic  


Reply

I have been searching to buy a focusing screen for my 350D for some time. At least I decided and got someting from the bay.

The screen has 45 degrees double split image and microprism and is OK, it is a pleasure to use it as well. But... Idea

But using it did not decrease my failure rate when it comes to focusing on the right point. I can see the lines are aligned from split image, I can see the clear view from microprism but it does not mean 100% appropriate focusing. The image can be front or back focused like with the standart screen.

There was a little focus tolerance with the standart screen, I was thinking I could eliminate this tolerance with a split image focusing screen and get 100% focused images but I did not Confused

I think I have to change my eyes Laughing or get a camera with a huge viewfinder Cool

Any comments?


Reply

Nathaniel,
My first advice for you - practice more, with experience you will get better results. My second advice is - never take just one shot, lean back and forth and take at least 3-4 shots and one of them will be in focus for sure Wink


Reply

download the chart http://focustestchart.com/chart.html and shim your screen until perfect results


Reply

You can get eye piece magnifier such as Olympus ME-1 (x1.2 mag) or
Nikon DK-21M (x1.17?), they helps a little. I use ME-1 for EOS 350D.


Reply

@Mist,
You are right, I did not give up, I am still trying to get better Smile

@poilu,
I tried this when I first tried manual shooting and realized that my 350D has a little front focusing problem (adding shims makes it worse). I took out all the shims but it is not perfect though, especially at f/2 or f/2.8.

@koji,
I have already Nikon DK-21M Laughing

Anything else? Cool


Reply

nathaniel wrote:
@Mist,
You are right, I did not give up, I am still trying to get better Smile

@poilu,
I tried this when I first tried manual shooting and realized that my 350D has a little front focusing problem (adding shims makes it worse). I took out all the shims but it is not perfect though, especially at f/2 or f/2.8.

@koji,
I have already Nikon DK-21M Laughing

Anything else? Cool


When all else fails, delve into the guts of it Smile
This is really simple and only needs a small hex key
http://www.bord-studio.com/article_01eng.php

http://www.astrosurf.org/buil/autofocus/adjust.htm


Reply

nathaniel wrote:
@poilu,
I tried this when I first tried manual shooting and realized that my 350D has a little front focusing problem (adding shims makes it worse). I took out all the shims but it is not perfect though, especially at f/2 or f/2.8.

Anything else? Cool


Adding shims under the screen moves it higher which means the focus is more in front. Taking a shim out lowers it which shifts the focus back. As you noticed.
What about insanity check? Making sure the screen is installed the correct way? Have you tested you screen for that?

I made a word play out of it when I changed my screen. "When in front take it out, when in back just add." Very Happy


Reply

Nope but it is not possible to install the screen in both ways. Thanks.



Reply

nathaniel wrote:
Nope but it is not possible to install the screen in both ways. Thanks.



I meant that have you checked wheter the tip on the bottom, in your pic, is in the left or right?


Reply

When the LCD of the camera faces towards me it is on the right.


Reply

nathaniel wrote:
When the LCD of the camera faces towards me it is on the right.

What if you change the screen position in a way that it is on the left?


Reply

As I said, it is not possible to mount in that way.


Reply

nathaniel wrote:
As I said, it is not possible to mount in that way.

Ok.

nathaniel wrote:
a huge viewfinder

Have you considered Tenpa 1.36x magnifier for your camera?
For me it helped to get better focusing.