MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

WTB: Tamron #23FH and #39FH hoods
View previous topic :: View next topic  


Reply

I'm looking for the lens hoods for the Tamron 90/2.5 52B (#23FH) and the 300/2.8 60B (#39FH).

I would be very grateful if anyone has any tips on where I could find these. Judging from the complete lack of results on eBay (Including completed listings) and the major photography stores I'm concerned I could be in for a long search.


Reply

Mike Deep wrote:
I'm looking for the lens hoods for the Tamron 90/2.5 52B (#23FH) and the 300/2.8 60B (#39FH).

I would be very grateful if anyone has any tips on where I could find these. Judging from the complete lack of results on eBay (Including completed listings) and the major photography stores I'm concerned I could be in for a long search.

Some of the Tamron hoods are next to impossible to find, unless the lucky fairy strikes you. What I did, when looking for a 47FH hood for the SP 28-80, was simply measure the OD at the hood bayonet and found the much more commonly available 45FH fitted it nicely and no problems with vignetting on a crop cam. FF might be a different story, of course.

In the meantime, here's something useful...
http://www.hemy.me.uk/Miscellany/TamronHoods.htm

Also, put in a search in ebay and leave it running for six months.


Reply

Thanks for the advice Farside. I have several eBay searches saved now.

I did receive a hood for the 360B (B3FH) with the 60B. I wasn't sure which version of the 300/2.8 I'd be getting since KEH didn't list the model number, so I figured I'd get the hood too and see if the lens turned out to be the right one.

The B3FH looks to have the right outer diameter for the 60B, it just doesn't have openings for the mount bayonet. Would I be better off trying to modify the B3FH than wait for a 39FH to turn up?