View previous topic :: View next topic |
Author |
Message |
streetwaves
Joined: 17 Dec 2008 Posts: 57
|
Posted: Mon Jan 19, 2009 10:33 pm Post subject: Help with scanning with a Canon 8800F |
|
|
streetwaves wrote:
Hey guys, I need some help scanning my 120 negatives with my Canon 8800F. I was trying to figure a way to scan without the included film trays, since those are technically above the point of focus and don't keep the film flat. But I tried just taking the film out of the tray and placing it the same way directly onto the scanner's glass (emulsion side-down), and the colors came out completely screwed up. I have no idea why. I had a CD case over the film to keep it flat.
What's going wrong? What would be the easiest/cheapest way to do this? Thanks!
By the way, I'm using VueScan. It's sort of confusing :$ _________________ Hasselblad 500C/M & Pentax K10D |
|
Back to top |
|
|
Farside
Joined: 01 Sep 2007 Posts: 6557 Location: Ireland
Expire: 2013-12-27
|
Posted: Tue Jan 20, 2009 1:22 am Post subject: Re: Help with scanning with a Canon 8800F |
|
|
Farside wrote:
streetwaves wrote: |
Hey guys, I need some help scanning my 120 negatives with my Canon 8800F. I was trying to figure a way to scan without the included film trays, since those are technically above the point of focus and don't keep the film flat. But I tried just taking the film out of the tray and placing it the same way directly onto the scanner's glass (emulsion side-down), and the colors came out completely screwed up. I have no idea why. I had a CD case over the film to keep it flat.
What's going wrong? What would be the easiest/cheapest way to do this? Thanks!
By the way, I'm using VueScan. It's sort of confusing :$ |
The plastic of the CD case is probably screwing with the colours. I've also used them, but only on B&W negs. You could try just holding down the edges or two ends of the film. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
Back to top |
|
|
lulalake
Joined: 22 Apr 2007 Posts: 1191 Location: Near Austin Texas
Expire: 2011-11-18
|
Posted: Wed Jan 21, 2009 4:13 am Post subject: Re: Help with scanning with a Canon 8800F |
|
|
lulalake wrote:
streetwaves wrote: |
Hey guys, I need some help scanning my 120 negatives with my Canon 8800F. I was trying to figure a way to scan without the included film trays, since those are technically above the point of focus and don't keep the film flat. But I tried just taking the film out of the tray and placing it the same way directly onto the scanner's glass (emulsion side-down), and the colors came out completely screwed up. I have no idea why. I had a CD case over the film to keep it flat.
What's going wrong? What would be the easiest/cheapest way to do this? Thanks!
By the way, I'm using VueScan. It's sort of confusing :$ |
Yes!
Doug Fisher's adjustable negative holder with Anti-Newton Ring accessory glass.
http://www.betterscanning.com/
There is one for your scanner. I've been using one on my Epson 4870 for a couple of years and it's excellent!
Jules
PS I use Viewscan also and it's very confusing, but it does scan beautifully when you get it tweaked in. |
|
Back to top |
|
|
streetwaves
Joined: 17 Dec 2008 Posts: 57
|
Posted: Wed Jan 21, 2009 4:54 am Post subject: Re: Help with scanning with a Canon 8800F |
|
|
streetwaves wrote:
lulalake wrote: |
streetwaves wrote: |
Hey guys, I need some help scanning my 120 negatives with my Canon 8800F. I was trying to figure a way to scan without the included film trays, since those are technically above the point of focus and don't keep the film flat. But I tried just taking the film out of the tray and placing it the same way directly onto the scanner's glass (emulsion side-down), and the colors came out completely screwed up. I have no idea why. I had a CD case over the film to keep it flat.
What's going wrong? What would be the easiest/cheapest way to do this? Thanks!
By the way, I'm using VueScan. It's sort of confusing :$ |
Yes!
Doug Fisher's adjustable negative holder with Anti-Newton Ring accessory glass.
http://www.betterscanning.com/
There is one for your scanner. I've been using one on my Epson 4870 for a couple of years and it's excellent!
Jules
PS I use Viewscan also and it's very confusing, but it does scan beautifully when you get it tweaked in. |
Thank you for the response! I don't think Doug Fisher has one for my scanner yet. I'll definitely buy from him if he makes one, though! _________________ Hasselblad 500C/M & Pentax K10D |
|
Back to top |
|
|
lulalake
Joined: 22 Apr 2007 Posts: 1191 Location: Near Austin Texas
Expire: 2011-11-18
|
Posted: Wed Jan 21, 2009 2:52 pm Post subject: Re: Help with scanning with a Canon 8800F |
|
|
lulalake wrote:
streetwaves wrote: |
lulalake wrote: |
streetwaves wrote: |
Hey guys, I need some help scanning my 120 negatives with my Canon 8800F. I was trying to figure a way to scan without the included film trays, since those are technically above the point of focus and don't keep the film flat. But I tried just taking the film out of the tray and placing it the same way directly onto the scanner's glass (emulsion side-down), and the colors came out completely screwed up. I have no idea why. I had a CD case over the film to keep it flat.
What's going wrong? What would be the easiest/cheapest way to do this? Thanks!
By the way, I'm using VueScan. It's sort of confusing :$ |
Yes!
Doug Fisher's adjustable negative holder with Anti-Newton Ring accessory glass.
http://www.betterscanning.com/
There is one for your scanner. I've been using one on my Epson 4870 for a couple of years and it's excellent!
Jules
PS I use Viewscan also and it's very confusing, but it does scan beautifully when you get it tweaked in. |
Thank you for the response! I don't think Doug Fisher has one for my scanner yet. I'll definitely buy from him if he makes one, though! |
About Doug . .
Do contact him as he is a very nice fellow and may make a prototype up for your model scanner or may have one now available.
Cheers
Jules |
|
Back to top |
|
|
streetwaves
Joined: 17 Dec 2008 Posts: 57
|
Posted: Fri Jan 23, 2009 4:29 am Post subject: |
|
|
streetwaves wrote:
Thanks sir. I read somewhere that the 8800F is actually sharpest if you place the film directly on the glass. Is this safe at any time, or will it result in Newton rings? Which side should be facing down if I do this? _________________ Hasselblad 500C/M & Pentax K10D |
|
Back to top |
|
|
lulalake
Joined: 22 Apr 2007 Posts: 1191 Location: Near Austin Texas
Expire: 2011-11-18
|
Posted: Fri Jan 23, 2009 4:46 am Post subject: |
|
|
lulalake wrote:
streetwaves wrote: |
Thanks sir. I read somewhere that the 8800F is actually sharpest if you place the film directly on the glass. Is this safe at any time, or will it result in Newton rings? Which side should be facing down if I do this? |
I don't know on this particular model but in non focusing flatbeds the great focus "sweet spot" may vary from scanner to scanner.
Put the shiniest side toward the lens and I suggest to use a mask made out of heavy dark paper to hold the sides of the film flat.
You may or may not get Newton rings . . have to try to see.
Consider wet mounting also.
Jules |
|
Back to top |
|
|
streetwaves
Joined: 17 Dec 2008 Posts: 57
|
Posted: Fri Jan 23, 2009 5:49 pm Post subject: |
|
|
streetwaves wrote:
Thanks for all your help! So I'm putting the shiny side face-down? Is there any way to remove Newton Rings if they do occur, other than in post-processing? Thanks again!
Joe _________________ Hasselblad 500C/M & Pentax K10D |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|