| View previous topic :: View next topic |
| Author |
Message |
lulalake
 Joined: 22 Apr 2007 Posts: 1191 Location: Near Austin Texas
Expire: 2011-11-18
|
 Posted: Thu Jul 10, 2008 1:58 am Post subject: Scanning Software # 1 Silverfast versus Vuescan |
|
 Posted: Thu Jul 10, 2008 1:58 am Post subject: Scanning Software # 1 Silverfast versus Vuescan |
|
|
lulalake wrote:
I am comparing Vuescan and Silverfast Ai software on a flatbed scanner.
I did these tests using the same 35mm negative on an Epson 4870, the flatbed that I have used since it came out in 2004. Epson has some proprietary software called Epsonscan but I didn’t put Epsonscan in the tests as both Silverfast Ai and Vuescan are in my opinion far better.
The shot is taken with Kodak Gold 200, (I don’t know what generation but fairly new). Unfortunately I had to do the scans on separate days so the dust and hair on the negatives are different but I hope this is forgiven.
I scanned these with both softwares at default settings with no sharpening, color adjustments or anything else. The scan is at 2400 DPI., taken by my wife with a Canon AE1-P, 50mm 1.4 lens, wide open in some shade
This is my late friend Pat Colecchio, peace be with him (Yes he’s of the Colecchio family from Colecchio, Italy near Parma), that’s me in the bokeh.
Immediately you can see an issue that is color. These are the default settings in both softwares. Silverfast Ai is obviously much more saturated, Vuescan looks more “real” and is actually more representative of the real colors than Silverfast Ai.. Vuescan also has 24 options for versions of Kodak Gold film, Silverfast Ai has 4.
This next shot is “cleaned up” scans, the Silverfast Ai version using digital ICE and the Vuescan version done by hand. Silverfast Ai’s version of ICE saturates the picture even farther. This is unacceptable to me.
4 hours was mentioned about cleaning up the scans by hand. The Vuescan version took me 16 minutes which is about 10 minutes less than what it took to use digital ICE, adjusting the setting, doing a test version and finally scanning. As you can see, digital Ice only got about 2/3 of the problems with the negative and then there were still problems that I would have to do by hand anyway.
I must admit that I’m fast at hand cleaning negatives as I don’t usually use digital ICE and I’ve been doing it for some time so I have an advantage there. I much prefer hand cleaning to Silverfast Ai’s Digital ice. It does take time to learn how to use Vuescan but like many things, it’s worth it for a flatbed scanner in my opinion.
Jules |
|
| Back to top |
|
 |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Thu Jul 10, 2008 2:20 am Post subject: |
|
 Posted: Thu Jul 10, 2008 2:20 am Post subject: |
|
|
Orio wrote:
hi Jules,
thanks for the very interesting comparison.
I have no experience with these software, but I have ICE in the Epson interface for the 4490, and I share your opinion, I don't like it at all - it takes away life and detail. I prefer much to have some grain than to use it.
I too, when necessary, do hand edit the scans, although most of the times I am just lazy and leave them unretouched
Nice photo this one with your friend, also
I live some 20-25 km away from Collecchio (double L), Parma.
The name of the little town has a meaning and a Latin origin (collicchius = small hill). I never heard of a family with the same name as the town, and in fact the map of Italian last names confirms that there is 0 entries with Collecchio as last name:
http://www.gens.labo.net/en/cognomi/genera.html?cognome=COLLECCHIO&t=cognomi
Colecchio, instead (with just one L), has two entries in the last names map, one in the north of Emilia, the other one in Naples:
http://www.gens.labo.net/en/cognomi/genera.html?cognome=COLECCHIO&t=cognomi
Colecchio, however, sounds decidedly not Emilian as last name, but southern Italian. So my guess is that the Colecchio last name is of Neapolitan origin. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
lulalake
 Joined: 22 Apr 2007 Posts: 1191 Location: Near Austin Texas
Expire: 2011-11-18
|
 Posted: Thu Jul 10, 2008 2:42 am Post subject: |
|
 Posted: Thu Jul 10, 2008 2:42 am Post subject: |
|
|
lulalake wrote:
| Orio wrote: |
hi Jules,
thanks for the very interesting comparison.
I have no experience with these software, but I have ICE in the Epson interface for the 4490, and I share your opinion, I don't like it at all - it takes away life and detail. I prefer much to have some grain than to use it.
I too, when necessary, do hand edit the scans, although most of the times I am just lazy and leave them unretouched
Nice photo this one with your friend, also
I live some 20-25 km away from Collecchio (double L), Parma.
The name of the little town has a meaning and a Latin origin (collicchius = small hill). I never heard of a family with the same name as the town, and in fact the map of Italian last names confirms that there is 0 entries with Collecchio as last name:
http://www.gens.labo.net/en/cognomi/genera.html?cognome=COLLECCHIO&t=cognomi
Colecchio, instead (with just one L), has two entries in the last names map, one in the north of Emilia, the other one in Naples:
http://www.gens.labo.net/en/cognomi/genera.html?cognome=COLECCHIO&t=cognomi
Colecchio, however, sounds decidedly not Emilian as last name, but southern Italian. So my guess is that the Colecchio last name is of Neapolitan origin. |
Thank you Orio.
His real name is Pasquali, but he went by Pat. The spelling of his name is in some doubt as his Father emigrated in about 1915 or so and I don't know how much they anglicized his name.
Thanks so much for the research as I would like to go there when I visit you sometime in the future . Pasquali and I were friends for 40 years.
Jules |
|
| Back to top |
|
 |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Thu Jul 10, 2008 3:10 am Post subject: |
|
 Posted: Thu Jul 10, 2008 3:10 am Post subject: |
|
|
Orio wrote:
| lulalake wrote: |
His real name is Pasquali, but he went by Pat. The spelling of his name is in some doubt as his Father emigrated in about 1915 or so and I don't know how much they anglicized his name. |
The name was certainly anglicized from Pasquale (typical neapolitan first name).
And you know what? The last name also was, I bet.
Look here:
http://www.gens.labo.net/en/cognomi/genera.html?cognome=COLICCHIO&t=cognomi
The above is the map for the last name Colicchio, which is a typical last name of Campania (the region of Naples). As you can see, there are three big clusters of Colicchio last name in Campania, plus one in Milan and one in Turin, but the last two have been certainly generated by internal immigration from south to north (in Milan and Turin there are industries, while in the south there is little work available).
Now, it sounds perfectly plausible that the name Colicchio was changed into Colecchio in the USA, because you pronounce the letter "e" the same way we pronounce the letter "i"
So I bet that your dear friend full name was originally meant to be Pasquale Colicchio.
| lulalake wrote: |
Thanks so much for the research as I would like to go there when I visit you sometime in the future . Pasquali and I were friends for 40 years.
Jules |
If you ever come to Italy, don't forget to make a stop here! It will be nice to meet you! _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
Katastrofo
 Joined: 26 Feb 2007 Posts: 10405 Location: USA
Expire: 2013-11-19
|
 Posted: Thu Jul 10, 2008 3:45 am Post subject: |
|
 Posted: Thu Jul 10, 2008 3:45 am Post subject: |
|
|
Katastrofo wrote:
Jules, very interesting thread, both the scanning software comparisons, and
your friend's family background/origins. The Silverfast gives you a nice
tan, Jules! But you're right the Vuescan (to me) looks far more realistic.
Would be interesting to see a comparison of other films, tho this would be
labor intensive.
Thanks for sharing this!
Bill |
|
| Back to top |
|
 |
A G Photography
 Joined: 11 May 2008 Posts: 1480 Location: Bologna - Italy
|
 Posted: Thu Jul 10, 2008 7:45 am Post subject: |
|
 Posted: Thu Jul 10, 2008 7:45 am Post subject: |
|
|
A G Photography wrote:
In Silverfast you have to choose the grey point and use the levels and curves to get good colors. And the preview is pretty real instead on Vuescan, as I said, it's more a hit and miss.
Which setting of ICE did you use? Speed or Quality one?
I never had those artifacts using Quality setting nor I had IQ drop, it's just boring long to complete.
And about the 4 hours, try to clean a medium format 50 MP image, 35 mm is a lot smaller  _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Back to top |
|
 |
lulalake
 Joined: 22 Apr 2007 Posts: 1191 Location: Near Austin Texas
Expire: 2011-11-18
|
 Posted: Thu Jul 10, 2008 1:01 pm Post subject: |
|
 Posted: Thu Jul 10, 2008 1:01 pm Post subject: |
|
|
lulalake wrote:
| A G Photography wrote: |
In Silverfast you have to choose the grey point and use the levels and curves to get good colors. And the preview is pretty real instead on Vuescan, as I said, it's more a hit and miss.
Which setting of ICE did you use? Speed or Quality one?
I never had those artifacts using Quality setting nor I had IQ drop, it's just boring long to complete.
And about the 4 hours, try to clean a medium format 50 MP image, 35 mm is a lot smaller  |
Hi Alessandro,
These colors were obtained using the default settings of both softwares. In Vuescan I chose Kodak Gold GEN-4.
The ICE settings were pretty aggressive but I don't remember what they were.
Could you suggest some settings I can try in Silverfast to get a better result? Thanks. (I do print a lot and quite large so high Quality settings are important to me)
I pretty regularly clean 122+ meg MF negs and Slides (48 bit color 2400 DPI). I've quite honestly never had it take more than 40-45 minutes but actually . . I like doing it (I know, I'm a geek he he).
Cheers
Jules |
|
| Back to top |
|
 |
A G Photography
 Joined: 11 May 2008 Posts: 1480 Location: Bologna - Italy
|
 Posted: Fri Jul 11, 2008 7:45 am Post subject: |
|
 Posted: Fri Jul 11, 2008 7:45 am Post subject: |
|
|
A G Photography wrote:
| lulalake wrote: |
| A G Photography wrote: |
In Silverfast you have to choose the grey point and use the levels and curves to get good colors. And the preview is pretty real instead on Vuescan, as I said, it's more a hit and miss.
Which setting of ICE did you use? Speed or Quality one?
I never had those artifacts using Quality setting nor I had IQ drop, it's just boring long to complete.
And about the 4 hours, try to clean a medium format 50 MP image, 35 mm is a lot smaller  |
Hi Alessandro,
These colors were obtained using the default settings of both softwares. In Vuescan I chose Kodak Gold GEN-4.
The ICE settings were pretty aggressive but I don't remember what they were.
Could you suggest some settings I can try in Silverfast to get a better result? Thanks. (I do print a lot and quite large so high Quality settings are important to me)
I pretty regularly clean 122+ meg MF negs and Slides (48 bit color 2400 DPI). I've quite honestly never had it take more than 40-45 minutes but actually . . I like doing it (I know, I'm a geek he he).
Cheers
Jules |
In Silverscan you have levels and curves just like in Photoshop. Another little important thing is the tool at the very right that let you set white, grey and black point. I always set black point using the black film and about 90% of color cast problems are solved this way. If you have good neutral gray zone in your shot you can also set a grey point for further refinement.
Then you can set the levels, I always try to acquire ALL the dymamic image range. I rarely use the curve tool unless I missed the exposition in the shot and I need to recover some burned or too black areas.
I sometimes also increase or decrease exposition in those cases too.
This way I get the basic image, further post processing is done in Photoshop because it's more powerful and 16 bit. _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Fri Jul 11, 2008 11:12 am Post subject: |
|
 Posted: Fri Jul 11, 2008 11:12 am Post subject: |
|
|
Attila wrote:
Many, many thanks for this review ! Nice to see you!
I like silvers fast better, more warm colors |
|
| Back to top |
|
 |
Nesster
 Joined: 24 Apr 2008 Posts: 5883 Location: NJ, USA
Expire: 2014-02-20
|
 Posted: Fri Jul 11, 2008 1:40 pm Post subject: |
|
 Posted: Fri Jul 11, 2008 1:40 pm Post subject: |
|
|
Nesster wrote:
This is interesting as I'm using the Epson software that comes with, and have been curious about these two.
Color aside, which do you think is the better software?
I agree about ice also, though sometimes I leave it on. _________________ -Jussi
Camera photos
Print Photographica
|
|
| Back to top |
|
 |
lulalake
 Joined: 22 Apr 2007 Posts: 1191 Location: Near Austin Texas
Expire: 2011-11-18
|
 Posted: Sat Jul 12, 2008 1:29 am Post subject: |
|
 Posted: Sat Jul 12, 2008 1:29 am Post subject: |
|
|
lulalake wrote:
| A G Photography wrote: |
| lulalake wrote: |
| A G Photography wrote: |
In Silverfast you have to choose the grey point and use the levels and curves to get good colors. And the preview is pretty real instead on Vuescan, as I said, it's more a hit and miss.
Which setting of ICE did you use? Speed or Quality one?
I never had those artifacts using Quality setting nor I had IQ drop, it's just boring long to complete.
And about the 4 hours, try to clean a medium format 50 MP image, 35 mm is a lot smaller  |
Hi Alessandro,
These colors were obtained using the default settings of both softwares. In Vuescan I chose Kodak Gold GEN-4.
The ICE settings were pretty aggressive but I don't remember what they were.
Could you suggest some settings I can try in Silverfast to get a better result? Thanks. (I do print a lot and quite large so high Quality settings are important to me)
I pretty regularly clean 122+ meg MF negs and Slides (48 bit color 2400 DPI). I've quite honestly never had it take more than 40-45 minutes but actually . . I like doing it (I know, I'm a geek he he).
Cheers
Jules |
In Silverscan you have levels and curves just like in Photoshop. Another little important thing is the tool at the very right that let you set white, grey and black point. I always set black point using the black film and about 90% of color cast problems are solved this way. If you have good neutral gray zone in your shot you can also set a grey point for further refinement.
Then you can set the levels, I always try to acquire ALL the dymamic image range. I rarely use the curve tool unless I missed the exposition in the shot and I need to recover some burned or too black areas.
I sometimes also increase or decrease exposition in those cases too.
This way I get the basic image, further post processing is done in Photoshop because it's more powerful and 16 bit. |
Thank you Alessandro,
I will try this. I agree that the Vuescan preview is not good.
Jules |
|
| Back to top |
|
 |
A G Photography
 Joined: 11 May 2008 Posts: 1480 Location: Bologna - Italy
|
 Posted: Sat Jul 12, 2008 1:38 am Post subject: |
|
 Posted: Sat Jul 12, 2008 1:38 am Post subject: |
|
|
A G Photography wrote:
| lulalake wrote: |
Thank you Alessandro,
I will try this. I agree that the Vuescan preview is not good.
Jules |
You're welcome.
Using defaults in this kind of software is like using AUTO program on a modern SLR Unfortunately you have need to spend some time to learn by mistakes. In this I prefer Silverscan, less options and more real preview, I also used Vuescan or some MF rolls but sincerely the gazillion options never helped me to improve the poor "default" scans I got from it. Maybe is better and more powerful than Silverfast, but I found it less reliable and consistent. Maybe it's me  _________________ Alessandro
My Photography Website
My Blog about Photography and Italian Cuisine
My Photostream on Flickr
--------------------------------------------------------
DSLR: Nikon d80, Olympus e410
SLR: Chinon CX, Fujica ST605n, Nikon f601, Pentacon FM, Pentax Spotmatic SPII, Praktica FX, Praktica FX2, Voigtlander VST1, Yashica FX-3, Zeiss Contaflex
RF: Altissa Altix, Zorki Ie, Kiev 4b
Medium Format: Pentacon Six TL, Zeiss Ikonta 520/2, Mockba 4, Voigtlander Bessa I, Agfa Isolette II, Agfa Isola
Large Format: Cambo SC 4x5, Rodenstock Sinaron 150/5.6, Rodenstock Rodagon 150/5.6, Schneider Kreuznach Symmar 180/5.6
Lenses
Nikkors: 28/3.5 AIS, 35/2, 50/1.8, 50/2 H, Micro 55/3.5, Micro 60/2.8, 85/1.8, 135/3.5 AI, 200/4 NAI, 18-55/3.5-5.6, 28-80/3.5-5.6, 55-200/4-5.6
CY: Distagon 28/2.8, Planar 50/1.4, Yashika 50/1.7, Sonnar 135/2.8
CZJ m42-Exakta: Flektogon 20/4, Flektogon 35/2.8, Tessar 40/4.5, Tessar 50/2.8, Pancolar 50/1.8, Pancolar 50/2, Biotar 58/2, Biotar 75/1.5, Tessar 80/2.8, Sonnar 135/3.5, Sonnar 135/4, Triotar 135/4
CZJ P6: Flektogon 50/4, Flektogon 65/2.8, Biometar 80/2.8, Biometar 120/2.8, Sonnar 180/2.8
Meyer-Pentacon: Orestegon 29/2.8, Pentacon 29/2.8, Lydith 30/3.5, Primagon 35/4.5, Helioplan 40/4.5, Domiplan 50/2.8, Primotar 50/3.5, Oreston 50/1.8, Primoplan 58/1.9, Orestor 100/2.8, Trioplan 100/2.8, Helioplan 135/4.5, Orestor 135/2.8, Pentacon 135/2.8, Primotar 135/3.5, Primotar 180/3.5, Telemegor 180/5.5, Orestegor 200/4, Pentacon 200/4, Orestegor 300/4, Telemegor 300/4.5, Telemegor 400/5.5
Schneider-Kreuznach: Curtagon 28/4, Curtagon 35/2.8, Xenon 50/1.9, Xenar 50/2.8, Tele Xenar 135/3.5, Tele Xenar 200/4
Russians: Arsat Zodiak 30/3.5, Mir-I 37/2.8, Volna-9 50/2.8, Industar-50 50/3.5, Industar-61 50/2.8, Helios 44 58/2, Helios 44-2 58/2, Helios 44-M-4 58/2, Volna-3 80/2.8, Helios 40 85/1.5, Jupiter 9 85/2, Jupiter 11 135/4
Others: Chinon-Tomioka 55/1.4, Helios 28/2.8, Isco Iscotar 50/2.8, Konica Hexanon 40/1.8, Ludwig Meritar 50/2.9, Schacht Travegon 35/3.5, Schacht Travenon 135/4.5, Sekor 55/1.8, Sigma MF 28/2.8, S-Takumar, 28/3.5, S-Takumar 50/1.4, S-Takumar 55/1.8, S-Takumar 55/2, Steinheil Quinar 135/2.8, Steinheil Culminar 135/4.5, Vivitar 135/2.8, Voigtlander Ultron 50/1.8, Yashica Yashinon DX 50/1.4, Zuiko MC Auto-W 28/2.8
|
|
| Back to top |
|
 |
Gary S. Colecchio
Joined: 23 Jun 2010 Posts: 1
|
 Posted: Wed Jun 23, 2010 10:31 pm Post subject: Re: Scanning Software # 1 Silverfast versus Vuescan |
|
 Posted: Wed Jun 23, 2010 10:31 pm Post subject: Re: Scanning Software # 1 Silverfast versus Vuescan |
|
|
Gary S. Colecchio wrote:
| lulalake wrote: |
This is my late friend Pat Colecchio, peace be with him (Yes he’s of the Colecchio family from Colecchio, Italy near Parma), that’s me in the bokeh.
|
Jules,
I am Pat's nephew Gary. I've been a big fan of your work since I was 12 and you were Gary.
Dubuque Blues is on my phone.
Anyway thanks for the photo. I didn't get to see my uncle in his last few years.
His passing was very sad and empty. |
|
| Back to top |
|
 |
Esox lucius
 Joined: 26 Aug 2008 Posts: 2441 Location: Helsinki, Finland
Expire: 2011-11-18
|
 Posted: Thu Jun 24, 2010 1:07 pm Post subject: |
|
 Posted: Thu Jun 24, 2010 1:07 pm Post subject: |
|
|
Esox lucius wrote:
Comparing different results with different software is quite misleading, unless you have profiled your software/scanner/film combination for correct scan results.
In other words: buy an IT8 target slide, insert profiling test slide in your scanner, run the Vuescan profile film process. Save settings as a film profile and make sure you use that profile when scanning same type of film next time.
Repeat process for every different film you use/scan to get correct results.
More on the subject here
http://www.hamrick.com/vuescan/html/vuesc16.htm
http://www.computer-darkroom.com/it8cal/it8_page_1.htm
http://www.targets.coloraid.de/ |
|
| Back to top |
|
 |
|
|