View previous topic :: View next topic |
Author |
Message |
mo
Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
Posted: Tue Mar 08, 2011 7:36 am Post subject: How to change a screen in a Pentax MX slr? |
|
|
mo wrote:
Hi All
I am just wondering if any of you have changed the screen in a camera and is it terribly hard to do?I have just received some screens via a member here on the forum (many thanks Univer) and I am busting to try one out to see if I can use my mirror lens on the MX....the original screen was not clear enough for focusing when using the mirror.
I have seen the instructions on the butkus site but for me they are not clear enough.... do you slide it out or clip it in place?
Thanks
I had better be clear I have the LX SE25 matte screen,I know they are interchangeable with the MX but I note there is a small extra piece on the LX focusing screen than the MX screens. _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
Back to top |
|
|
Spotmatic
Joined: 18 Aug 2008 Posts: 4045 Location: Netherlands
|
Posted: Tue Mar 08, 2011 8:10 am Post subject: |
|
|
Spotmatic wrote:
I only have experience replacing the screens in Pentax DSLRS. In those cameras, you just unlock the hinged screen frame which then comes down. The screen can then be removed with a pair of tweezers (preferably made of plastic, or with plastic tips), and replaced with the new screen. The screen frame can then be clicked back in place.
Hope I made myself clear enough _________________ Peter - Moderator
Pentax K-5 + Pentax 645 + Canon 5D + Bessa RF 10,5cm Heliar, and a 'little' bag full of MF lenses. The lens list is * here *.
My fast 80s: Asahi-Kogaku Takumar 83mm f/1.9 - Super-Takumar 85mm f/1.9 - FA 77mm f/1.8 Limited - Cyclop 85/1.5 (Helios-40 innards) - Komura 80mm f/1.8 - Meyer Görlitz Primoplan 7,5cm 1:1.9 - Carl Zeiss Jena 80mm f/1.8 Pancolar - Canon 85mm f/1.8 S.S.C. - Canon 85mm f/1.2 S.S.C. Aspherical |
|
Back to top |
|
|
mo
Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
Posted: Tue Mar 08, 2011 8:33 am Post subject: |
|
|
mo wrote:
Yes very clear,thanks...The only tweezers that came with the screens are metal.
These are the instructions in the butkus manual...I can not see what the tweezers grab onto as the foam bumper in my MX is in the way... _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
Back to top |
|
|
Spotmatic
Joined: 18 Aug 2008 Posts: 4045 Location: Netherlands
|
Posted: Tue Mar 08, 2011 11:13 am Post subject: |
|
|
Spotmatic wrote:
Was your MX restored in some way? The foam bumper should have a hole in it to reach the "lock" to release the screen frame.
By the way: the old screen comes down in the frame. It's loose inside that frame; grab the tab with the tweezers.
The reason that the old manual shows a metal tweezer is that original screens have the tab to handle them (the tab is purely for changing the screens and for orientation purposes) while many aftermarket screens lack this tab and you have to touch the screen surface to replace it. And metal tweezers damage the screen surface... _________________ Peter - Moderator
Pentax K-5 + Pentax 645 + Canon 5D + Bessa RF 10,5cm Heliar, and a 'little' bag full of MF lenses. The lens list is * here *.
My fast 80s: Asahi-Kogaku Takumar 83mm f/1.9 - Super-Takumar 85mm f/1.9 - FA 77mm f/1.8 Limited - Cyclop 85/1.5 (Helios-40 innards) - Komura 80mm f/1.8 - Meyer Görlitz Primoplan 7,5cm 1:1.9 - Carl Zeiss Jena 80mm f/1.8 Pancolar - Canon 85mm f/1.8 S.S.C. - Canon 85mm f/1.2 S.S.C. Aspherical |
|
Back to top |
|
|
mo
Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
Posted: Tue Mar 08, 2011 8:37 pm Post subject: |
|
|
mo wrote:
Ahhh Thank you.... yes the Foam was replaced recently but no gap was left.
I should be able to work something out with the tweezers and removing a bit of foam... to get the screen.I wish it was easier as I get nervous about damaging the camera and the screens. _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
Back to top |
|
|
visualopsins
Joined: 05 Mar 2009 Posts: 11012 Location: California
Expire: 2025-04-11
|
Posted: Tue Mar 08, 2011 9:19 pm Post subject: |
|
|
visualopsins wrote:
Use the tweezers to gently press down the bumper foam in the center, the release pin should be seen just behind the foam. Camera on back, top away from you, move the foam, carefully grab only the pin with the tweezers, pull gently toward camera front. The little tray hinges down, holding focus screen. If screen has no grab tab, use finger cots or gloves. No worries if a little dip remains in the foam where it was compressed -- foam is there for bumper not for light seal. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
Back to top |
|
|
mo
Joined: 27 Aug 2009 Posts: 8979 Location: Australia
Expire: 2016-07-30
|
Posted: Tue Mar 08, 2011 9:25 pm Post subject: |
|
|
mo wrote:
Quote: |
foam is there for bumper not for light seal |
Thank you for this piece of info it certainly takes the worry out now _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
Back to top |
|
|
ryan s
Joined: 26 Sep 2008 Posts: 384 Location: Madison, WI
|
Posted: Tue Mar 08, 2011 11:44 pm Post subject: |
|
|
ryan s wrote:
It's really not difficult...it will make sense once you unlatch the screen frame
Having the little special tweezers makes it a lot easier if you have a pair...they naturally "clamp" the tab on the screen then you compress the tweezers to release the screen from its grasp.
Hardest part is locking the screen into the camera. Scratched my one K10D screen a little But the MX is easier. _________________ Pentax Bodies: K10D + D-BG2 | MX |
M: Zenitar 16/2.8 | 28/2.8 | 50/1.7 | M39: Mir-1 GP 37/2.8 M42: Vivitar 28/2.5 AD2: Tamron SP Macro 90/2.5 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|