MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Exakta adapter but lens does not fit?
View previous topic :: View next topic  


Reply

So I got myself an Exakta adapter for Canon EOS. But the lens I wanted to use first (the uncoated Meyer Primoplan 75/1.9) does not fit. Upon closer inspection, there is a tiny screw in the lens that sticks out from the mount. This screw seems to be original; I have seen another lens with the same screw. Due to this screw, the lens cannot be mounted.

My question: what's this little screw on the lens for? I'm thinking about removing it as it does not seem to have a function, other than preventing it for being mounted (on certain cameras)?


Reply

Isn't it something like back-stop? To prevent the lens to turn around in the mount(?).


Reply

no-X wrote:
Isn't it something like back-stop? To prevent the lens to turn around in the mount(?).


It sounds the same to me. There should be a lever in the adapter where you have to stick that pin to block the lens (just look at the mount on an exakta camera and you'll understand what I mean).


Reply

Yep, I know that there's a pin in the Exakta mount which clicks into a spring loaded "lever/lock", but the pin I talk about is IN the mount itself. I'll post a pic of it in a few hours...


Reply

Here's a photo of the culprit. The mentioned screw is the one on the top, in the mount, the lower one and somewhat to the right of that screw is the normal Exakta locking screw.

Can I safely assume that the little screw in the bayonet serves no important function and that I can remove it without problem?



Reply

A G Photography wrote:
no-X wrote:
Isn't it something like back-stop? To prevent the lens to turn around in the mount(?).


It sounds the same to me. There should be a lever in the adapter where you have to stick that pin to block the lens (just look at the mount on an exakta camera and you'll understand what I mean).


Alessandro, I'm afraid the Exakta-EOS adapter (at least mine) doesn't have any lever... Just a small screw that is used to fix the adapter to the lens once in place.

Regards,
Jes.


Reply

Spotmatic: You can remove it, if you need (but don't throw it away Smile )

Some lenses has both, some only the smaller-one, some only the bigger-one. Their purpose should be the same. My Biotar (which I sold yesterday) has only the bigger one.


Reply

no-X wrote:
Spotmatic: You can remove it, if you need (but don't throw it away Smile )

Some lenses has both, some only the smaller-one, some only the bigger-one. Their purpose should be the same. My Biotar (which I sold yesterday) has only the bigger one.


OK thanks, I'm going to remove the screw, but I'll keep it of course Smile

Now if everything goes well I'm hoping to post some examples with the Primoplan tonight Very Happy


Reply



Reply

Spotmatic wrote:

OK thanks, I'm going to remove the screw, but I'll keep it of course Smile

Now if everything goes well I'm hoping to post some examples with the Primoplan tonight Very Happy


I think you need this screw to lock the adapter. Perhaps try to replace it with a different screw?


Reply

hk300 wrote:
Spotmatic wrote:

OK thanks, I'm going to remove the screw, but I'll keep it of course Smile

Now if everything goes well I'm hoping to post some examples with the Primoplan tonight Very Happy


I think you need this screw to lock the adapter. Perhaps try to replace it with a different screw?


Alex, no, the adapter only needs the second screw (in the photo) to lock the lens. I'll prove that tonight... The three tabs on the adapter are as large as the "cut-outs" in the lens, so this explains why the lens does not fit (the tab on the adapter cannot sink deep enough into the bayonet of the lens). Another option would be to file off a small part of the tab on the adapter, but I'll do nothing potentially damaging tonight Smile