View previous topic :: View next topic |
Author |
Message |
aoleg
Joined: 22 Feb 2008 Posts: 1387 Location: Berlin, DE
|
Posted: Tue Mar 12, 2013 5:44 pm Post subject: Konica Hexanon 85mm 1.8 - adjusting infinity focusing w/pics |
|
|
aoleg wrote:
1. Remove rubber from focusing ring
2. You'll see a ring comprised of two parts. Focus to closest distance (optional: for convenience only). Unscrew the front part.
3. Remove it by pulling it off.
4. You'll see three adjustment screws. They hold the focusing ring to the actual focusing helicoid. Loosen them slightly; the ring will become loose and detached from the helicoid. Adjust infinity position, tighten the screws. Assemble back.
_________________ List of lenses |
|
Back to top |
|
|
eddieitman
Joined: 12 Apr 2011 Posts: 1246 Location: United Kingdom
|
Posted: Tue Mar 12, 2013 6:49 pm Post subject: |
|
|
eddieitman wrote:
Thanks for this just used it to repair mine as it had grit in helicoid _________________ My web site www.digital-darkroom.weebly.com
Life is like a camera. Focus on what's important, capture the good times, develop from the negatives and if things don't work out, just take another shot. |
|
Back to top |
|
|
hoanpham
Joined: 31 Jan 2011 Posts: 2575
Expire: 2015-01-18
|
Posted: Tue Mar 12, 2013 9:08 pm Post subject: |
|
|
hoanpham wrote:
Thanks.
I have the older version, full metal build, that needs to tighten these screws.
Is there a way to get access to these screws? |
|
Back to top |
|
|
Attila
Joined: 24 Feb 2007 Posts: 57865 Location: Hungary
Expire: 2025-11-18
|
Posted: Tue Mar 12, 2013 9:18 pm Post subject: |
|
|
Attila wrote:
Many thanks for guide! _________________ -------------------------------
Items on sale on Ebay
Sony NEX-7 Carl Zeiss Planar 85mm f1.4, Minolta MD 35mm f1.8, Konica 135mm f2.5, Minolta MD 50mm f1.2, Minolta MD 250mm f5.6, Carl Zeiss Sonnar 180mm f2.8
|
|
Back to top |
|
|
aoleg
Joined: 22 Feb 2008 Posts: 1387 Location: Berlin, DE
|
Posted: Thu Mar 14, 2013 12:45 pm Post subject: |
|
|
aoleg wrote:
hoanpham wrote: |
Thanks.
I have the older version, full metal build, that needs to tighten these screws.
Is there a way to get access to these screws? |
I don't have the older version, but there must be some way. I would start from removing the front beauty ring (with a rubber stopper), then looking if the front barrel can be removed (usually held by a grub screw or similar). Then you would probably be able to access the adjustment screws. _________________ List of lenses |
|
Back to top |
|
|
hoanpham
Joined: 31 Jan 2011 Posts: 2575
Expire: 2015-01-18
|
Posted: Thu Mar 14, 2013 1:06 pm Post subject: |
|
|
hoanpham wrote:
Thanks. I will try.
The name ring is so thin, that I don't think it can fit any screws behind, but perhaps taking away the front element. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|