MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Seagull TLR Fomapan 100 Fomadon LQN
View previous topic :: View next topic  


Reply

#1

#2

#3

#4

#5

#6

#7

#8

#9


Reply

Some good landscape shots there.

I see a few of the shots with sky in have dark streaks. What is the cause?


Reply

martinsmith99 wrote:
Some good landscape shots there.

I see a few of the shots with sky in have dark streaks. What is the cause?


No idea.


Reply

I get the streaks around when Bill tells me to chuck my fixer.


Reply

Is that a 35mm camera? It could be surge coming through the perforations. Also, I've had those streaks with light-damaged film as well as over-agitated film that develops some uneven developing.


Reply

David wrote:
Is that a 35mm camera? It could be surge coming through the perforations. Also, I've had those streaks with light-damaged film as well as over-agitated film that develops some uneven developing.


6x6 TLR, thanks for tip.


Reply

Perhaps, not enough force in agitation? I've had something like it with 35mm when I used a stirring method.


Reply

martinsmith99 wrote:
Perhaps, not enough force in agitation? I've had something like it with 35mm when I used a stirring method.


Possible I did use two tanks parallel, and may I forgot to agitate in every minutes.


Reply

Take one strip and re-fix, see if that clears things up.


Reply

Would it be too late to refix?


Reply

martinsmith99 wrote:
Would it be too late to refix?


No. Here is an extreme example:

The Dangers of Exhausted Fixer by Nesster, on Flickr

after fixing by Nesster, on Flickr


Reply

Indeed, extreme thanks!!


Reply

Excellent. I assumed that after the negatives look like this, they would be ruined.


Reply

I think I have understood where the bands come from.
It happens to me too sometimes, when I leave the scanner turned on for a long time: it starts creating bands while scanning.
I can make it go away easily, by turning the scanner off, then on again. This procedure forces the scanner to recalibrate itself,
and this gets rid of the bands.
So possibly your scanner may have this issue also, and create bands while scanning when left turned on for a too long time.
Try to experiment and see if it disappears by turning the scanner off then on again.


Reply

Orio wrote:
I think I have understood where the bands come from.
It happens to me too sometimes, when I leave the scanner turned on for a long time: it starts creating bands while scanning.
I can make it go away easily, by turning the scanner off, then on again. This procedure forces the scanner to recalibrate itself,
and this gets rid of the bands.
So possibly your scanner may have this issue also, and create bands while scanning when left turned on for a too long time.
Try to experiment and see if it disappears by turning the scanner off then on again.


Will do thank you!