MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Jupiter 9 Kiev - dissasembly?
View previous topic :: View next topic  


Reply

I've got an early Jupiter 9 in Kiev mount and i want to take it apart and clean it.
The body is very dirty and grease need to be changed as the focusing is very stif.

Also the lens flares so much to an extent it is almost unusable. Stopping down just makes things even worse.
I guess it can benefit from a cleaning of the glass and maybe some black paint on the inside.

This is what i have found so far but it's not complete - i also need to dismantle the lens block
http://www3.telus.net/public/rpnchbck/Jupiter-9%20dismantle.html

Can someone direct me to a similar tutorial where it is shown how to dismantle the front part too.

Thanks


Reply

Removing the front part should just be standard procedure. Take off nameplate. Front element should pop out. Spacer. Element group. The back elements should come off as an entire block.


Reply

Ok the whole optical block come out quite easy.
Then i have removed the name ring and the front lens element.
then removed the aperture ring, and now I'm stuck Sad .

Any idea what to do next?

#1

#2

#3

#4

#5


Reply

I think take screw #2 out. Then the chrome portion should unscrew counterclockwise.


Reply

OK i have successfully unscrewed also 1, 2 and 3 and removed the black ring and the back lens group.
Still i can't figure out how to remove the front group which is before the aperture.


#1


Seems that the front part ( the shiny one) is made of two pieces but i can't unscrew them.


Reply

themoleman342 wrote:
I think take screw #2 out. Then the chrome portion should unscrew counterclockwise.


You were right!
Thanks a lot

After cooling it a bit in the freezer i was able to finally unscrew it.
and now i have 2 pieces Smile