MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Fd adapter for Canon fd 24mm f/2.8
View previous topic :: View next topic  


Reply

Hi all,
I have just bought a 24mm 2.8 to use through adapter on my 5d2 and e-pl2;
I have used many other fd lenses before with my adapters but this 24mm doesn't want to open or close the diaphragm.
If I move the rear lever diaphragm moves, but when I mount it on the camera it doesn't want to and stays wide open.
Any help?
maybe my adapters fit an older kind of fd lens? (This 24mm seems a bit younger then my 50mm and 100mm).


Reply

There is a small pin inside the micro 4/3 adapter which pulls the fd lens rear lever back when the lock-unlock ring is maneuvered.
Well, this pin seems to bee too short to keep the lever back; that's why the diaphragm doesn't respond properly.
The other fd lenses work perfectly with this adapter though.


Reply

Is your "problem" lens the sort with the chrome breech-locking ring? If so, it's easy to disable the auto iris mechnism by pushing one of the levers to one side. If not, then try http://www.youtube.com/watch?v=N0JczOo9OHg


Reply

scsambrook wrote:
Is your "problem" lens the sort with the chrome breech-locking ring? If so, it's easy to disable the auto iris mechnism by pushing one of the levers to one side. If not, then try http://www.youtube.com/watch?v=N0JczOo9OHg


Thanks a lot scsam!