MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Bargain strobist light tripod at IKEA !
View previous topic :: View next topic  


Reply

If you're a strobist and need a very light tripod for a flashgun, there is a new floor lamp at Ikea named TROGSTA for only $10/8€

Click here

Very light, 4 sections and, best of all, once the socket is removed, there is a 3/8"-ish (plastic) screw !

It took me 5 minutes to assemble the tripod, remove the socket and screw instead a light ball head.

It is not very high fully extended (1,40m - 55") but just right for my use (for a background flash) ... and you can recycle the shade as a diffuser


Reply

Nice to know, I'll check it when back in Montpellier Smile


Reply

Thanks, thanks, thanks!! I'm going to buy at least three!
to hold flash, reflectors, cloths...


Reply

A quick picture to show you the setup :



From bottom :

DIY battery box (gives some weight to the tripod's base) fastened with a bungee
Cable with fake batteries
Ball head screwed on top (it fits the LARGE screw size 3/8", not the more common small 1/4")
Vivitar 2800D modded for manual use

The picture shows the tripod fully extended, the flashgun is more or less at chest height. It's a bit flimsy fully extended, definitively not appropriate for a camera


Reply

Nice hint! Thanks.


Reply

Okay, you can officially label me dumb Laughing but how do I remove the socket? Embarassed
there is no removable part.


Reply

Jieffe wrote:
A quick picture to show you the setup :



From bottom :

DIY battery box (gives some weight to the tripod's base) fastened with a bungee
Cable with fake batteries
Ball head screwed on top (it fits the LARGE screw size 3/8", not the more common small 1/4")
Vivitar 2800D modded for manual use

The picture shows the tripod fully extended, the flashgun is more or less at chest height. It's a bit flimsy fully extended, definitively not appropriate for a camera

I've seen this setup before, but I don't get the purpose of the battery pack. I have never flattened a set of flash batteries in day-long shoots and if I did I would just replace them; so clearly I'm missing something?


Reply

martinsmith99 wrote:
I've seen this setup before, but I don't get the purpose of the battery pack. I have never flattened a set of flash batteries in day-long shoots and if I did I would just replace them; so clearly I'm missing something?

That flashgun is used to light the background. We are two shooters, so we need fast recycle time (the batteries are 3.2 amp compared to 2 amp eneloops). This is also convenient not to have to change batteries during a shoot (taking into account that my partner is more an artist than a technician, which means *I* would have to change the batteries).

And don't forget I'm kind of a geek too. The pleasure to make myself batteries has to be considered Wink


Reply

Nice setup, I would look for a lamp next time on IKEA... Very Happy


Reply

Nice but can it hold an umbrella? Confused

Also cheap chinese tripods like this Click here to see on Ebay have a head which you can adjust the flash position.

edit: your light ball head costs new more than this tripod, or if it is cheaper I want to know where you got it Smile
edit edit: ok, not neccessarily .. but still: can it hold an umbrella too?


Reply

Jieffe, somehow the comments of the other posters have managed to make my question of yesterday go unnoticed: how do I remove the socket, please?


Reply

Orio wrote:
Jieffe, somehow the comments of the other posters have managed to make my question of yesterday go unnoticed: how do I remove the socket, please?


Usually this is the technique:
1 make sure lamp is not connected to electricity (really!)
2 on the bottom of the socket where the bulb is, there is usually some pin or strip of metal that prevents you screwing the upper half of the socket away. Use a screwdriver to bend it so the upper half moves.
3 screw the upper half of the socket away
4 pull the bottom of the socket, where the cords and bulb connectors are. Cut or screw off the cords so you can remove it.
5 on the lower half of the socket there sometimes is a locking screw inside. Screw it off. Now you should be able to screw the bottom half of the socket off and end up with a clean thread on top of the vertical tube.

(sorry my technical english isn't what it should be but hope you got it ..)


Reply

kansalliskala wrote:
Orio wrote:
Jieffe, somehow the comments of the other posters have managed to make my question of yesterday go unnoticed: how do I remove the socket, please?


Usually this is the technique:

Couldn't explain it better Smile


Reply

kansalliskala wrote:
Nice but can it hold an umbrella? Confused

edit: your light ball head costs new more than this tripod, or if it is cheaper I want to know where you got it Smile
edit edit: ok, not neccessarily .. but still: can it hold an umbrella too?


The ballhead costs about 5 € (I already had them), but don't think about adding an umbrella, it is not stable enough for that. For me, the advantage of it is a very small footprint (my studio is small) and lightness, as well as cost

For more serious material, it is possible to find some Jinbei chinese tripod at 25 € (got mine in a belgian store) and they are quite good.
http://www.fotokonijnenberg.be/product/1603831/jinbei-sj-190-aluminium-lampstatief.html (sorry, link in dutch)


Reply

Well, it is available at 7.99 euros at my local IKEA shop ... Going to buy 2 tomorrow for my flashguns Very Happy ...


Reply

indianadinos wrote:
Well, it is available at 7.99 euros at my local IKEA shop ... Going to buy 2 tomorrow for my flashguns Very Happy ...

The good thing is you can check it before buying it as it is displayed in Ikea's showroom. Then you can decide if it is sturdy enough for your needs. As I said, mine are used indoor with a small flashgun and they do well for that use.


Reply

indianadinos wrote:
Well, it is available at 7.99 euros at my local IKEA shop ... Going to buy 2 tomorrow for my flashguns Very Happy ...


Same price here. I've been tnis afternoon to IKEA. Boxed are really tiny, ideal for small flats like mine.
At the end I didn't buy any, the one in show was terribly unstable, so I went back to ask Jieffe here prior to buying one.
But for that price...

Jes.


Last edited by Jesito on Fri Jan 20, 2012 7:39 am; edited 1 time in total


Reply

Jieffe wrote:

The good thing is you can check it before buying it as it is displayed in Ikea's showroom. Then you can decide if it is sturdy enough for your needs. As I said, mine are used indoor with a small flashgun and they do well for that use.


Well, i will use them indoor with a couple of Vivitar 285 grabbed at a local fleamarket Wink ... They don't look much bigger than your Viv 2800 ...


Reply

indianadinos wrote:
Well, i will use them indoor with a couple of Vivitar 285 grabbed at a local fleamarket Wink ... They don't look much bigger than your Viv 2800 ...

283/285 are a little heavier but the tripod copes with it (tested)


Reply

Grabbed two of them Very Happy ... Will post the pictures of the setup asap ...