| View previous topic :: View next topic |
| Author |
Message |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
|
| Back to top |
|
 |
Spotmatic
 Joined: 18 Aug 2008 Posts: 4045 Location: Netherlands
|
 Posted: Fri Mar 25, 2011 10:50 pm Post subject: |
|
 Posted: Fri Mar 25, 2011 10:50 pm Post subject: |
|
|
Spotmatic wrote:
Wow, I did not know a lens needed that much bearing balls. It looks like an infestation!
What's the source of those bearing balls? _________________ Peter - Moderator
Pentax K-5 + Pentax 645 + Canon 5D + Bessa RF 10,5cm Heliar, and a 'little' bag full of MF lenses. The lens list is * here *.
My fast 80s: Asahi-Kogaku Takumar 83mm f/1.9 - Super-Takumar 85mm f/1.9 - FA 77mm f/1.8 Limited - Cyclop 85/1.5 (Helios-40 innards) - Komura 80mm f/1.8 - Meyer Görlitz Primoplan 7,5cm 1:1.9 - Carl Zeiss Jena 80mm f/1.8 Pancolar - Canon 85mm f/1.8 S.S.C. - Canon 85mm f/1.2 S.S.C. Aspherical |
|
| Back to top |
|
 |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
 Posted: Fri Mar 25, 2011 10:57 pm Post subject: |
|
 Posted: Fri Mar 25, 2011 10:57 pm Post subject: |
|
|
trifox wrote:
The lens has basically two bearing rings - one is inside (broken as seen on pictures)
I think that is not very good idea by Canon - but never mind - I am not a lens engineer
Another bearing mechanism is placed in the mount - that one was OK in this case
My thought - unconfirmed - Someone broke the lens by turning the aperture mechanism - usually people do try to open the aperture on FD lenses and they do not know how to open it. _________________ Flickr.com |
|
| Back to top |
|
 |
Spotmatic
 Joined: 18 Aug 2008 Posts: 4045 Location: Netherlands
|
 Posted: Fri Mar 25, 2011 11:06 pm Post subject: |
|
 Posted: Fri Mar 25, 2011 11:06 pm Post subject: |
|
|
Spotmatic wrote:
Thanks for the explanation - the lenses I've disassembled usually have only one bearing ball for the diaphragm click stops  _________________ Peter - Moderator
Pentax K-5 + Pentax 645 + Canon 5D + Bessa RF 10,5cm Heliar, and a 'little' bag full of MF lenses. The lens list is * here *.
My fast 80s: Asahi-Kogaku Takumar 83mm f/1.9 - Super-Takumar 85mm f/1.9 - FA 77mm f/1.8 Limited - Cyclop 85/1.5 (Helios-40 innards) - Komura 80mm f/1.8 - Meyer Görlitz Primoplan 7,5cm 1:1.9 - Carl Zeiss Jena 80mm f/1.8 Pancolar - Canon 85mm f/1.8 S.S.C. - Canon 85mm f/1.2 S.S.C. Aspherical |
|
| Back to top |
|
 |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
 Posted: Fri Mar 25, 2011 11:09 pm Post subject: |
|
 Posted: Fri Mar 25, 2011 11:09 pm Post subject: |
|
|
trifox wrote:
and --- gathered balls
tf _________________ Flickr.com |
|
| Back to top |
|
 |
my_photography
 Joined: 03 Nov 2008 Posts: 2772 Location: Pearl of the Orient
Expire: 2016-12-25
|
 Posted: Sat Mar 26, 2011 1:25 am Post subject: |
|
 Posted: Sat Mar 26, 2011 1:25 am Post subject: |
|
|
my_photography wrote:
Wow, they need all those ball bearings for the lens? _________________
Zeiss: CJZ Flektogon 20/2.8, CJZ Flektogon 20/4, , CJZ Pentacon 29/2.8, CJZ Flektogon 35/2.4, CJZ Pancolar 50/1.8, Tessar 50/2.8, Biotar 7.5cm/1.5, CJZ Pancolar 80/1.8, CJZ Sonnar 135/3.5, CJZ Pentacon 135/2.8 CJZ Sonnar 200/2.8
Other Germany: Meyer Primoplan 50/1.8, Meyer Trioplan 100/2.8
Takumar: SMC 50/1.4 Super Tak 55/2, Super Tak 85/1.9, S-M-C 135/3.5, Super Tak 150/4
Russian: Zenith 16/2.8, Mir-24M 2/35, Volna-9 50/2.8, Helios 44M (58/2), Helios 44M-3 MC (58/2), Helios 40 (85/1.5), Tair 11A (135/2.8 )
Others: Sears 28/2.8, Sankor 35/2.8, Enna M�nchen Tele-Ennalyt 135/3.5
Zoom Sigma Zoom 28-85/3.5-4.5
|
|
| Back to top |
|
 |
aleksanderpolo
 Joined: 24 Jan 2010 Posts: 684
|
 Posted: Sat Mar 26, 2011 6:19 am Post subject: |
|
 Posted: Sat Mar 26, 2011 6:19 am Post subject: |
|
|
aleksanderpolo wrote:
Lifetime supply of bearing balls
So are you going to put the balls where they were originally? Or skip them altogether? The suspense is killing me  |
|
| Back to top |
|
 |
caerwall
 Joined: 11 Nov 2010 Posts: 51
|
 Posted: Mon Jun 06, 2011 12:42 pm Post subject: Canon 100-400 f4.5-5.6 IS Trombone |
|
 Posted: Mon Jun 06, 2011 12:42 pm Post subject: Canon 100-400 f4.5-5.6 IS Trombone |
|
|
caerwall wrote:
My trombone zoom is a great lens but the mechanism became sticky (jerky) there was a small trace on the barrel which seemed to me that a small piece of grit had gone under the slide.
So genius even found a schematic diagram of the lens and thought that if the slide lock was removed the barrel could simply be cleaned.
Out come four tiny easily removed screws and about 200 micro ball bearings followed quickly thereafter.
Inside the mount there is a horizontally opposed open double ball race one facing in each direction. The barrel fitting is the only thing keeping them in place.
I could not see how anyone could ever manage to fit or replace such small bearings under this circumstance - back to canon for an expensive repair caused by a simple attempt to clean. Someone told me they used magnets to get them in there.
I subsequently found that approximately one in ten of these lenses have that barrel stiction problem. What happens is that the whack of the slide hitting against the non-damped end of the travel can jump one or more bearings out of it's race. This then first gets under the slide and causes that sticky feeling - and the trace mark on the barrel I saw was a sign of this. The bearings can then often travel into the lens body itself and interfere with the IS mechanism as well.
Of course it was out of warranty and I had tried to "clean" it myself ...
So be warned that the 85mm f1.2 is not the only Canon lens with open ball races inside. |
|
| Back to top |
|
 |
dnas
 Joined: 14 Nov 2008 Posts: 488 Location: Japan
|
 Posted: Wed Jun 15, 2011 2:10 am Post subject: |
|
 Posted: Wed Jun 15, 2011 2:10 am Post subject: |
|
|
dnas wrote:
A lot of Canon FD lenses have those ball bearings..... I am usually very reluctant to disassemble the rear of these lenses, because it's difficult to put all of those back in the right place!!!!! |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|