MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Biometar 120, yellow filter
View previous topic :: View next topic  


Reply

This was shot on the Pentacon Six with an uncoated 120mm Biometar and (I think) the yellow filter using Ilford Pan-F 50 film and spot metering with the Pentax one degree spot meter.
The Biometar seems to be much, much sharper than the 80mm Sekor on the Mamiya, but that lens has a host of strange scratch marks on an interior element which may affect sharpness.




I think this may be about the best exposed B&W neg I have ever shot.


Reply

Wow! Excellent ! I think yellow filter did help a lot too to get this excellent result.


Reply

I don't think the Biometar is uncoated. Did you mean to say that it does not have multicoating? It does have at least single coating for sure. The result is certainly impressive.


Reply

yes i believe it is single coated as well. nice shot! i really love this lens, i think very often overlooked in favor of 135's. i got mine for under $100 and it is the only lens right now that i even think about using instead of my planar 85/1.4 on the 5d.


Reply

Spotmatic wrote:
I don't think the Biometar is uncoated. Did you mean to say that it does not have multicoating? It does have at least single coating for sure. The result is certainly impressive.


+1 I have 4 or 5 version of this lens all are stunning I can't imagine better portrait lens on my Pentax 645 or on P6.


Reply

Yes, I mean "not multi-coated". It really is a very fine lens. Here's another one from the same time.





I must say I'm enjoying this film.


Reply

Just excellent too!


Reply

Attila wrote:


+1 I have 4 or 5 version of this lens all are stunning I can't imagine better portrait lens on my Pentax 645 or on P6.


also very good on digital 5d!


Reply

Excellent, the tonal range is great indeed!


Reply

Last one have great 3d effect. Well done BW.


Reply

Thanks. I find it quite a challenge to think in black and white, I'm so used to using colour to define the subject. But when it works I think the result is worthwhile.


Reply

PaulC wrote:
..............................., but that lens has a host of strange scratch marks on an interior element which may affect sharpness.

In my opinion the supposed scratch doesn't influence the nice results at all!


Reply

The scratches aren't on the Biometar which I posted shots from above, they are in the Sekor. You can't see the Sekor's softness at this sort of magnification, anyway, but it is obvious wnen looking at really big shots.

Here's a Sekor frame:


but this is what it looks like at the pixel level on a 3000x3000 pixel size image:


The Biometar is a lot sharper than that when its shots viewed at the same size.

For comparison, here is a shot with the Biometar also cropped from an image sized to 3000x3000.



Reply

Once again, a showing of a great lens from a GREAT photographer.
The black and whites are really quite perfect to my eyes! I am also
dabbling in b&w, but haven't gotten near to these results. I'm using
R25 right now, but the film you are using is so "grainless" that it is
producing awesome results!


Reply

There are two important aspects of this - one is that I am now sending my films off to a pro lab in the UK so the processing is really top-notch, the other is that I have worked out how to use the Epson V500 to get results that I want.
I use the scanner in manual (professional) mode (making sure ICE is switched off, it does odd things with B&W), and then adjust it by pulling the sliders out to both sides of the histogram so that nothing is cut off (if there is an area or pure black or white from the neg holder or the gap between the frames - these tend to make separate peaks on either side - I chop those off). The sliders on the bottom I pull out as far as they will go and then I use the middle slider in the histogram to adjust the mid-tone greys until I like the result.
I guess that just like in the old days, 90% of the result is in the processing/printing.
I'd have thought R25 should have similar grain to Ilford Pan-F 50 if the development is right.
Oddly, I'm finding Tri-X 400 the most awkward to get results from. Pan-F and FP4 have both worked well.
I'm not a great photographer yet but you are welcome to tell everyone that I am. After all, at least half of a reputation is built on bluster and a lot less than half on ability!


Reply

Paul wrote:
I use the scanner in manual (professional) mode (making sure
ICE is switched off, it does odd things with B&W), and then adjust
it by pulling the sliders out to both sides of the histogram so that
nothing is cut off (if there is an area or pure black or white from
the neg holder or the gap between the frames - these tend to
make separate peaks on either side - I chop those off). The sliders
on the bottom I pull out as far as they will go and then I use the
middle slider in the histogram to adjust the mid-tone greys until I
like the result.


Shocked Shocked Shocked Shocked Shocked

This is an uncanny thing - I use almost EXACTLY the method that you
are using Paul! I just sort of experimented around, same as you did
I'm sure, and BINGO!, there it is. Amazing that we both came up with
quite similar methods. Cool

Paul wrote:
I'd have thought R25 should have similar grain to Ilford Pan-F 50
if the development is right.
Oddly, I'm finding Tri-X 400 the most awkward to get results from.
Pan-F and FP4 have both worked well.
I'm not a great photographer yet but you are welcome to tell everyone that I am.
After all, at least half of a reputation is built on bluster and a lot less than half on ability!


I guess I inferred that the R25 had more "grain". I looked at
my sentence, and I worded it in such a way that the reader
would think that I have grain in the R25, which is in error.
In actuality, there is a smoothness that I love in R25, and like
you said, the Pan-50 probably produces similar results.

As far as reputation, I guess you know now that I use a LOT of
bluster, and that gets me by. Haha! Of course, let's just keep
that secret, okay?


_________________