| View previous topic :: View next topic |
| Author |
Message |
William
 Joined: 26 Nov 2009 Posts: 489 Location: London
|
 Posted: Wed Oct 13, 2010 8:48 pm Post subject: Your printers |
|
 Posted: Wed Oct 13, 2010 8:48 pm Post subject: Your printers |
|
|
William wrote:
I think it would be good to discuss the digital photo printers that forum members use. Which printer do you use? Are you happy with it and what are it's strengths and weaknesses?
I use a Canon Pixma ip4700 inkjet, now replaced by the near identical ip4820. I have to say I was amazed how it performed considering the price of around £80, there have been prints back from printers with lower colour fidelity and sharpness. Black and white prints are not tinted and maintain subtle toning too and it is rare that I have to edit a photo for printing from how it was for monitor viewing. The only real downside is the speed, it takes well over 2 minutes to print at A4 high quality but this is not important to me. |
|
| Back to top |
|
 |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Wed Oct 13, 2010 8:51 pm Post subject: |
|
 Posted: Wed Oct 13, 2010 8:51 pm Post subject: |
|
|
Orio wrote:
how did you set up your system with regards to printer colour calibration, monitor profile syncing, etc ? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
William
 Joined: 26 Nov 2009 Posts: 489 Location: London
|
 Posted: Wed Oct 13, 2010 8:59 pm Post subject: |
|
 Posted: Wed Oct 13, 2010 8:59 pm Post subject: |
|
|
William wrote:
The printer is not calibrated with the monitor but the colours seem pretty accurate. I use ICC profiles for the paper I am using, mainly Ilford Smooth Heavyweight Matt and Smooth Fine Art (although rarely the latter as it's very expensive) If results aren't quite right I edit and reprint. |
|
| Back to top |
|
 |
natebarnz
 Joined: 14 Jan 2010 Posts: 331 Location: Los Angeles / Tucson
Expire: 2013-01-23
|
 Posted: Thu Oct 14, 2010 4:49 pm Post subject: |
|
 Posted: Thu Oct 14, 2010 4:49 pm Post subject: |
|
|
natebarnz wrote:
I'm very new to photo printers but I found a great deal on a Canon PIXMA Pro9000mkII and I am extremely happy with the results. I have done no calibration yet and am using the provided printing software on my Mac. I've currently only used the Canon Platinum paper. I was able to print over 100 4x6 photos and I ran out of photo magenta, everything else is over half to completely full.
I'm hoping to learn some things from this thread as I'm sure I can improve my results. _________________ 500D / SPII / FTn / Contax D / 137MA / Contaflex
Contax 28/2 - 35/1.4 - 35/2.8 - 45/2.8 - 50/1.4 - 100/3.5 - 135/2.8
CZJ 20/4 - 35/2.8 - 50/2.8 - 58/2 - 135/3.5
Rokkor PG 58/1.2 - PF 58/1.4 - X 85/1.7
Nikkor S 55/1.2 - H 85/1.8 - P.C. 55/3.5
Helios 44-2 58/2 Meyer Oreston 50/1.8
Elmarit-R 90/2.8 Sears 55/1.4
--> Visit My Picasa Galleries <-- |
|
| Back to top |
|
 |
rukmeister
 Joined: 14 Aug 2010 Posts: 104 Location: Hobart, Australia
Expire: 2011-11-18
|
 Posted: Sat Oct 16, 2010 8:14 pm Post subject: |
|
 Posted: Sat Oct 16, 2010 8:14 pm Post subject: |
|
|
rukmeister wrote:
I run an Epson R1900 printer with a third party CIS (continuous ink supply). It's mainly used for proofing so longevity of inks isn't really a concern for me.
I have a Colormunki calibrator. Had a pro profile done for the CIS inks, but I personally couldn't see any difference between the pro and the colormunki generated profile. Also couldn't tell the difference between Epson inks and third party. Looks EXACTLY the same to my eye. I've been using the inkjetfly cis, but i would not recommend it. Its poor construction, few bits unsticking/coming off now with < 1yr use. Will be sourcing a new cis soon and trying another 3rd party ink (any recommendations anyone?).
Use a PVA panel Dell monitor (an IPS would be nice, especially an eizo, but I'd rather buy lenses with that money ) and a Dell 490 workstation which number crunches photoshop nicely. Calibrated monitor with the munki too.
Workstation is setup in controlled lighting in a grey coloured area. Lights are Solux brand MR16 colour accurate lights and I highly recommend them for your work area and for lighting your display pieces.
Usually print on Centurion Photo silk, a semigloss with a nice texture. It's cheap and gives me excellent results for proofing. Has OBAs in it I think though. Final printing usually depends on the picture, I do like hahnmuhle papers and there are a few canson i use every now and then - each paper has its own profile of course. I usually send my good stuff to imagescience.com.au for printing. I'm considering trying out fotoflot.com seems like an interesting idea.
Anyway, my workflow is fairly simple : check calibration of monitor, load RAW files in Adobe bridge, Delete rejects & Star good shots, Load in ACR (set with NO NR & NO Sharpening) and make adjustments to white balance (whibal card shot usually www.whibal.com), exposure, etc. Load in photoshop, use topaz denoise plugin, use topaz detail plugin, maybe a high pass sharpen and/or smart sharpen at this point, levels and contrast adjustment layer. Then print with PS doing the colour management & specific media profile.
Works well for me. Good consistent, predictable results. Also took a ridiculous amount of time and work to figure out this workflow where I get to spend more time using the camera to take photos then screwing around with the computer and printer. I'm there now, but wow it was a pain setting up first time around.
On a side note, this is one of the criteria for me rejecting a shot. If I have to spend more time on the computer and printer than it took to go out and take the shot, it is an automatic reject. I'd rather go back out and take the photo again then screw around with Photoshop all day. |
|
| Back to top |
|
 |
symphonic
 Joined: 23 May 2010 Posts: 550 Location: SE Europe, Croatia
|
 Posted: Sat Oct 16, 2010 8:28 pm Post subject: |
|
 Posted: Sat Oct 16, 2010 8:28 pm Post subject: |
|
|
symphonic wrote:
I recently got an Epson px700w (artisan 700 in the US). It's my first photo printer, so I can't compare it to anything else, but I'm satisfied with it very much. Cheap and it's a all-in-one device (it has a scanner), photo prints come out very nice (A4 max), has a wireless connectivity and lots of cheap CISS solutions to be found online. For someone with a limited budget, I'd say it's a good choice. _________________ Toni,
EOS 450D
CZJ Sonnar 135/3.5 MC | Pancolar 50/1.8 MC
Contax Planar 50/1.4 AEJ | Contax Sonnar 135/2.8 AEJ
Yashica ML 28/2.8 | Zuiko 28/3.5
Vivitar Series1 105/2.5 OM
AF: Tokina 12-24 |
|
| Back to top |
|
 |
exaklaus
 Joined: 11 Aug 2009 Posts: 1633 Location: Niederrhein, Germany
Expire: 2011-12-02
|
 Posted: Wed Oct 20, 2010 6:38 am Post subject: |
|
 Posted: Wed Oct 20, 2010 6:38 am Post subject: |
|
|
exaklaus wrote:
Use an Epson Pro 3800 mostly with Hahnemühle paper using the ICC profiles for the paper. Perfect results, but many of my large prints were made by www.digitaloriginal.de, nowadays.
Had another A3+ Epson before this one (don't recall the name and number) which was an outstanding printer, too. The results were outstanding, but it was not so easy to handle like the 3800, which works like a charme (most of the time). But with it, I'm now limited to A2+, no long panos like with the other one (3m+).
Monitor calibration with Eye-one from Gretacmacbeth. But I guess I should replace it one day, as it is some years old, now!
Klaus _________________ my Ebay auctions
Canon 5D II,
Fuji GW690III, Fuji G617, Fujifilm X-E1
Bessaflex TM
Tachihara 4"x5"
Summilux-R 1:1,4/50
Canon FD 85mm 1:1,2
Color-Heliar 75mm F2.5 SL
www.autoselbstfotografie.de
www.classic-cameras-and-lenses.de |
|
| Back to top |
|
 |
WolverineX
 Joined: 19 Apr 2009 Posts: 1693 Location: Zagreb , Croatia , Europe
|
 Posted: Wed Oct 20, 2010 12:05 pm Post subject: |
|
 Posted: Wed Oct 20, 2010 12:05 pm Post subject: |
|
|
WolverineX wrote:
I use Epson printers.
I have Epson stylus photo 1400 A3+ and Epson stylus photo R360 A4 and both are reliable with great quality prints ( i use original inks ). Also Epson drivers are very reliable. two weekends ago i held photo contest and my Epson worked like clockwork printing out 60 a4 prints in 2 hours (don't do math,as printing wasn't continous ) . _________________ my tools:Oly E-M5 + 45mm/1.8 + Oly E-520 + 12-60 + 14-42 + 70-300 + Sigma 105mm + FL-50R + EC20 + SRF-11 ring flash
http://forum.mflenses.com/wolverinex-testing-my-lenses-series-link-list-t39524.html |
|
| Back to top |
|
 |
trev
 Joined: 30 Jun 2010 Posts: 580 Location: North Wales - UK
|
 Posted: Tue Oct 26, 2010 6:01 pm Post subject: |
|
 Posted: Tue Oct 26, 2010 6:01 pm Post subject: |
|
|
trev wrote:
I use an older canon pixma ip4300 and see no need to change to for a newer model. I get good faithful colours even using "remanufactured inks" and splendid b/w prints too and I do not find it too slow either. I've not got it calibrated to my screen although colours are slightly darker on the screen....... _________________ Fuji X10, X-A1 and Samsung nx 20 |
|
| Back to top |
|
 |
William
 Joined: 26 Nov 2009 Posts: 489 Location: London
|
 Posted: Tue Oct 26, 2010 10:02 pm Post subject: |
|
 Posted: Tue Oct 26, 2010 10:02 pm Post subject: |
|
|
William wrote:
Interesting to see people's methods, Rukmeister in particular has a very thorough workflow.
Trev, as I understand the Canon printers tend to change slowly. I bought my ip4700 knowing that the ip4850 was to replace it in a few months and from what I read the printing is pretty much identical, it's just slightly faster and a little cosmetically different. |
|
| Back to top |
|
 |
visualopsins
 Joined: 05 Mar 2009 Posts: 11698 Location: California
Expire: 2027-07-11
|
 Posted: Fri Nov 19, 2010 7:07 pm Post subject: |
|
 Posted: Fri Nov 19, 2010 7:07 pm Post subject: |
|
|
visualopsins wrote:
EPSON Stylus Photo 1400 Series here...ink and papers are EXPENSIVE!
Tip: test print at 4x6 size to avoid wasting $$$ ink on full size print! _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Back to top |
|
 |
William
 Joined: 26 Nov 2009 Posts: 489 Location: London
|
 Posted: Fri Nov 19, 2010 8:19 pm Post subject: |
|
 Posted: Fri Nov 19, 2010 8:19 pm Post subject: |
|
|
William wrote:
| visualopsins wrote: |
EPSON Stylus Photo 1400 Series here...ink and papers are EXPENSIVE!
|
I share your pain, I got about 40 20x13.3cm prints out of my printer's first ink, hopefully those cartridges have less ink in than usual. My favourite paper, Ilford Smooth Fine Art is hard to find for less than 90p an A4 sheet so is rarely used. I mainly use Ilford Smooth Heavyweight Matt which is about 20p and is double sided. |
|
| Back to top |
|
 |
GrahamNR17
 Joined: 17 Jan 2009 Posts: 1855 Location: Norfolk, UK
Expire: 2012-09-06
|
 Posted: Thu Sep 08, 2011 7:15 pm Post subject: |
|
 Posted: Thu Sep 08, 2011 7:15 pm Post subject: |
|
|
GrahamNR17 wrote:
I gave up with printers for photos a long time ago. I have an old Kodak that produces superb little postcard prints for my album (I think it uses some kind of thermal colour transfer) but when I need a larger print, I upload it to Pixmania or Kodak and they print it much better than I ever could and it usually arrives within a couple of days. Over the five years I've been doing that, it has cost a lot less than the printer, ink, paper etc I would have used. |
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Thu Sep 08, 2011 9:50 pm Post subject: |
|
 Posted: Thu Sep 08, 2011 9:50 pm Post subject: |
|
|
peterqd wrote:
Seems I'm going to be the odd one out. I need an A3 printer for my music and I don't have the space (or funds) to run two. So the printer I use for occasional photoprinting is a Hewlett Packard 9300 Deskjet. It must be getting on for 10 years old now. HP inks are expensive too!
It makes quite acceptable photo prints, although I'm sure a dedicated photoprinter would be much better. There is no way I can find in the software to calibrate the colour with the monitor and sometimes I have to boost the saturation a little on the print file. _________________ Peter - Moderator |
|
| Back to top |
|
 |
trev
 Joined: 30 Jun 2010 Posts: 580 Location: North Wales - UK
|
 Posted: Fri Sep 09, 2011 9:15 am Post subject: |
|
 Posted: Fri Sep 09, 2011 9:15 am Post subject: |
|
|
trev wrote:
Sadly, my canon pixma ip4300 gave up the ghost awhile back so went out and bought their pixma ip4850 which seems to print exactly the same as my older model only slower!!!
Aint canon's ink expensive though?? _________________ Fuji X10, X-A1 and Samsung nx 20 |
|
| Back to top |
|
 |
William
 Joined: 26 Nov 2009 Posts: 489 Location: London
|
 Posted: Tue Sep 13, 2011 3:43 pm Post subject: |
|
 Posted: Tue Sep 13, 2011 3:43 pm Post subject: |
|
|
William wrote:
Trev: I believe that the cheapest place for cartridges is 7dayshop, the C/M/Y ones need replacing the most unless you do a lot of monochrome printing: http://www.7dayshop.com/catalog/product_info.php?cPath=777_2&products_id=109911
That's the same price as the CL521 pack which fits my ip4700. I think it's comparable to Epson prices. |
|
| Back to top |
|
 |
pst
 Joined: 25 Aug 2010 Posts: 108 Location: Austria
Expire: 2013-08-17
|
 Posted: Fri Sep 16, 2011 9:54 am Post subject: |
|
 Posted: Fri Sep 16, 2011 9:54 am Post subject: |
|
|
pst wrote:
I'm using the Canon Pro 9000 MkII with Canon paper. Oddly the supplied profiles never met the colors on screen. I know quite a bit about color management, but I never found out where the mistake lies. So I just used the printers color offset function so prints match my (calibrated) screen.
Prints look great, and the cartriges last long. Canon ink is not really expensive IMHO and even if a cartrige says "empty" it is possible to continue printing for quite some time. E.g. you can easily print a full A3 (very dark) b/w print on an "empty" black cartrige. _________________ Regards, Patrick. |
|
| Back to top |
|
 |
Olivier
 Joined: 18 Feb 2009 Posts: 5097 Location: France
Expire: 2015-08-06
|
 Posted: Sat Sep 17, 2011 8:58 pm Post subject: |
|
 Posted: Sat Sep 17, 2011 8:58 pm Post subject: |
|
|
Olivier wrote:
I 'm using a canon Pixma Pro 9000 Mark II too.
I'm very happy with the ink cartridges, the speed and the final results.
I use Canon and Epson papers and the standard profiles given for the Canon papers.
Prints are very good, both colour and b/w. No bronzing at all. _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Back to top |
|
 |
|
|