MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Transfering files from CF card via camera.
View previous topic :: View next topic  


Reply

Basicly I have some files on the CF card, but dont have a memory card reader home. Is it possible with some software to use the camera as a memory card reader or something like that, I really need to get those files.

If it makes any difference, then its a Canon 30D.

Thanks in advance.


Reply

Yes, you should be able to connect the camera to the PC with a USB or firewire cable and then either simply use the camera as an external drive and copy manually, or use dump functions of DPP (if exists - I never use that program).


Reply

buy a reader, they are cheap and faster than transfer with the usb cable


Reply

Don't know about that Canon, but I've often been exasperated by most cameras requirement for non-standard cables and extra drivers that only come on the original installation CD. Personally I don't even bother to set up computers for direct camera readout, and I rather doubt that it will work in a situation where you are even missing the far less uncommon drivers and cables that go with your card reader...


Reply

Well Camerawindows and EOS tools and XP picture transfer only recognises the pictures take with the camera, cant see any other files on the card.


Reply

You need Canon's Zoombrowser EX software which is on the CD that came with your camera. Connect your camera to your PC with the supplied cable and then download the files.


Reply

Yes. And that uses EOS utility and it only lets transfer pictures taken with the camera. It does not allow access to the card itself.


Reply

I didn't understand that those are not photographic files.
Then buy a card reader. They cost, like, 10 Euros.


Reply

Orio wrote:
I didn't understand that those are not photographic files.
Then buy a card reader. They cost, like, 10 Euros.


Some are pictures and some arent. Only see PICTURES taken with IT. Everything else is blocked out.
I know whats a card reader and how much does it cost. The question is: is this possible.


Reply

Canon has been absurdly stubborn, refusing to enable the use of the camera as a USB mass storage device, as nearly all other manufacturers do...

Anyway a card reader is about 3X faster, so it is the only option if you want to transfer 32GB and you don't have 2 hours to waste.

BTW, I think DPP has much better color fidelity than any other raw converter for Canon (sounds plausible, right?).


Reply

nkanellopoulos wrote:

BTW, I think DPP has much better color fidelity than any other raw converter for Canon (sounds plausible, right?).


It is. But Breezebrowser has the same. It uses Canon's SDK.
Try it, it's a great browser. It's not as flexible as Lightroom for managing large quantity of files, but if you want the true Canon colours and want to avoid the super awkward interface of DPP, Breezebrowser is the way.


Reply

There is one possibility but don't know if it is practical to you. Rename the files like on card like IMG_9001.CR2, IMG_9002.CR etc and put them to the folder that the pics are (assuming you don't have these pics Smile). Then EOS utility just says "it is broken" but moves them anyways.


Reply

I have two digi bodies bought as damaged.

Both take CF cards. The pins are remarkably easy to damage. Buy the largest card you can afford and leave it in camera, download to the PC or an intermediary device, with a portable hard drive.

Taking out the card may cost you more than a few minutes of time!