MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

bellows leak?
View previous topic :: View next topic  


Reply

I find these on almost all the Bessa RF shots. The water shots I posted
were cropped off on the right that have bright spots in the two corners:




Taking the camera to work to check for leaks in the bellows. When I
shot the roll of B&W, I thought those were artifacts left by the developing
apron.


Reply

These are light leaks, definately Sad


Reply

Seems yes, light throw camera in a dark place you should find it.


Reply

Yes, looks like what my Super Ikonta did before I had the bellows replaced. Take your camera to a dark room, insert a flashlight inside and inspect the bellows from outside. You'll see where the leaks are.


Reply

Thanks, guys, that's what it looked like to me, taking it to my shop
today.


Reply

Is this the pre-war Bessa RF? Mine had the leaks right there where the bellows are attached to the body. I think yours has the same problem.


Reply

yes, likely the leaks are close to the body where the bellows meets camera. Some black silicone goop (you can find some in an auto parts store, among other places) will do a good job at least temporarily.


Reply

Peter, yes, it's this one with new leather bellows:


I'm thinking the bellows are intact and that part of it has somehow
separated from the body. Will know for sure when I get to work.

Nesster, thanks, will check on the silicone goop. If it's a loose flap I can
glue back down, I won't need the goop.


Reply

Well, I have two hairline leaks top of hood in each corner where it attaches to the lens. Thinking goop which is flexible will make a nice
bandaid repair. Hood is light tight which I thought it would be, looks as
new.