Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Topcor 4/135
View previous topic :: View next topic  


PostPosted: Sat Oct 10, 2009 5:09 pm    Post subject: Topcor 4/135 Reply with quote

What do you think, is this adapted to FD mount?
http://www.allegro.pl/item758747062_obiektyw_kogaku_1_4_135mm.html


PostPosted: Sat Oct 10, 2009 5:16 pm    Post subject: Reply with quote

Yes.


PostPosted: Sat Oct 10, 2009 5:33 pm    Post subject: Reply with quote

Not sure if the lens can be really FD: "FD" refers not only to the actual fitting but the coupling system too. It is like the manual focus Minolta mount is "SR" but it has "MC" and "MD" coupling variations.


PostPosted: Sat Oct 10, 2009 6:18 pm    Post subject: Reply with quote

UV mount

Look here
http://forum.mflenses.com/topcor-4-200-t20343.html

If you try it out and it works pls give me a short notice. Thanks


PostPosted: Sat Oct 10, 2009 6:20 pm    Post subject: Reply with quote

Rolf wrote:
UV mount

Look here
http://forum.mflenses.com/topcor-4-200-t20343.html

If you try it out and it works pls give me a short notice. Thanks



Dang! Yes! I have it and forgot it.


PostPosted: Sun Oct 11, 2009 1:34 pm    Post subject: Reply with quote

UV Topcor are very hard to adapt on other cameras . However, the register is 55mm , the same than T2 mount . So , it is eventually possible to modify the lens mount and make some "surgery" to obtain a "transplant" from a T2 ring ... I sold my Whole gear of Topcon unirex (4 bodies , uni, unirex , ic1, and the whole range of lenses (from 28 to 200) .
Very Happy