MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Epson V500 or V700 scanner -- which one to choose?
View previous topic :: View next topic  


Reply

I'm about to take the plunge and buy myself a scanner. Now, the question is whether the V700 is much better than the V500? Wouldn't it be better to buy the cheaper V500 and invest in more scan software such as SilverFast 6?

I still have a hard time deciding...


Reply

I think V500 is newer version than V700 (not 100% sure of it), if so
the mechanism is the same or just cost down version of V700.
I would pick V500 and possibly get a nicer software, EPSON's SW is
not a great one IMHO. Its ICE(4) technology is SLOOOOW and not effective
and bug ridden, though I use its SW without any option/feature. Confused

The other reason to pick less expensive one is that after many year (over
three years) the flat glass gets cloudier due to the heat. You will wonder
weather you take it to service centre to clean the glass or buy a new
scanner. Very Happy Very Happy It is very difficult to clean the inside of flat glass by yourself,
however I do not know whether the newer scanner is self serviceable.


Last edited by koji on Thu Sep 17, 2009 3:26 pm; edited 1 time in total


Reply

I've seen various reports - seems the more expensive Epson has the following advantages:
- greater dmax
- less scanner noise
- larger negative holder
- different light source is faster to warm up & produces less heat ***Edit: looks like the V500 also has the led lighting***

I believe - though don't know for a fact - that the V500 has the same size 120 carrier as my 4490. As a P645 user, this size will only scan 2 6x4.4 frames at a time... if it were just a bit longer, I could get 3 at a time. This is due to the larger spacing between frames with the P645 (yielding 15 instead of 16 pictures per 120 roll).

So that's the case for the more expensive hardware. I'm in agreement with Koji re the advantages of less expensive hardware.

For the software, I didn't find the silverfast demo easy to use, though it may have been easier (or at least providing more feedback) than the VueScan I ended up buying.

VueScan does ultimately provide a better scan than the Epson software, but it's such a pain to use I only use it on special occasions.


Last edited by Nesster on Thu Sep 17, 2009 3:21 pm; edited 1 time in total


Reply

The V500 utilizes only one lens system where the V700 has two (though that has more to do with the latter covering a bigger area), it can only scan transparencies up to medium format and comes with less sophisticated film holders (but you'll want third party holders in either case). The V750 supposedly adds better lenses - but the difference seems to be barely bigger than the production tolerances.


Reply

Nesster wrote:

For the software, I didn't find the silverfast demo easy to use, though it may have been easier (or at least providing more feedback) than the VueScan I ended up buying.

VueScan does ultimately provide a better scan than the Epson software, but it's such a pain to use I only use it on special occasions.


Silverfast is spot on for 90% of the images, in its "idiot mode". But beware - once you have to tweak it, its handling is infinitely worse than VueScan.

Sevo


Reply

They're totally different appliances, targeted to different type of user. Price is also substantially different. V700 is semi-pro level, V500 is definitely consumer level. The illumination is fluorescent lamp for V700 and white LEDS for V500. On the paper they seem to have same resolution but the sensors are totally different with the V700 one being substantially better. The declared DMAX is 4 for V700 and 3,4 for V500, I suspect these data are quite optimistic but still V700 is the winner. The V700 is capable of doing up to 2 4x5" sheets, while the V500 stops at 6x12. As Sevo pointed out the optics are also on different levels. In the end what leads to a choice is the format you want to cover and your budget. My opinion? If I had had a higher budget I would have chosen V700 even if I'm not planning to move toward formats bigger than 6x6. I believe that V500, that BTW is on its way to me, should do a good job with medium format and reasonably good one on 135. We'll see Smile .
Cheers, Marty.


Reply

Thanks for the helpful insights! I think you all have more or less sold me to the V500. It's also way cheaper: I can get 2.5 V500 scanners for the price of one V700.

I think I just need to learn how to use the various scanning programs. Of course there's a learning curve involved, just as I had to re-learn how to shoot on flm. However, maybe I'm a fast learner Smile


Reply

I would also consider Vuescan as a software option. It's said to be very good and permits an high degree of control over the process, albeit it may be difficult to master in the beginning. Least but not last is cheaper too.

Cheers, Marty.


Reply

The V600, successor to the V500 is out real soon now. See whether you can a discounted V500. Or get a refurbished 4490 - its difference to the V500 is marginal.


Reply

FWIW - here's a comparison of Epson vs VueScan software on the 4490. I did not go crazy trying to either optimize or standardize the procedures, but rather show what can be achieved with reasonably easy effort.
http://forum.mflenses.com/epson-vs-vuescan-epson-4490-t18799,highlight,vuescan.html


Reply

How I use EPSON scanner? (I guess no one asked this. Very Happy)

First pick "professional mode" (this one is most versatile, you can even scan TX-1 neg/pos),
next pick "film guide" used or not (normally "guide used" for 135 format, neg/slide),
third pick "24 bit colour and dpi 2400" (in my usual case, you should pick them yourself).

Then PRE-scan with thumbnail display on, it automatically separates each
flame and displays each.

At this point you have many choices (I do not touch any one of them,
range of spectrum, colour balance, etc.), then pick "no USM" and no
to every section. After that, click "scan" finally, it asks where to store
the result under what name (for prefixing) and starting number.

(I do PP on Photoshop Element 6.0 after scan, mostly USM applied and color/light balance.)

Wait till done.

note: scanning speed is largely depends on your PC's speed, of course
your EPSON mechanical speed too (but this portion is non-negotiable
once you get one. Sad ) If you feel scanning too slow without any
SW options such as ICE tech, it is the time to change your PC. Very Happy Very Happy


Last edited by koji on Fri Sep 18, 2009 2:43 pm; edited 1 time in total


Reply

Thanks for providing us with your workflow, Koji! This will be quite helpful while I scan my first slide. Because I just came back with a new Epson V500. Hopefully I'll be able to show the results later tonight!


Reply

Spotmatic wrote:
Thanks for providing us with your workflow, Koji! This will be quite helpful while I scan my first slide. Because I just came back with a new Epson V500. Hopefully I'll be able to show the results later tonight!


How cool! You will love it I am pretty sure!


Reply

Attila wrote:
Spotmatic wrote:
Thanks for providing us with your workflow, Koji! This will be quite helpful while I scan my first slide. Because I just came back with a new Epson V500. Hopefully I'll be able to show the results later tonight!


How cool! You will love it I am pretty sure!


We'll see, thanks! Very Happy


Reply

I've a V500 and the scans I've done with it are at least equal to previous lab scans.