| View previous topic :: View next topic |
| Author |
Message |
sidecar
Joined: 09 Jul 2009 Posts: 10
|
 Posted: Thu Jul 09, 2009 1:28 pm Post subject: Contax 18/4 Distagon to 5D |
|
 Posted: Thu Jul 09, 2009 1:28 pm Post subject: Contax 18/4 Distagon to 5D |
|
|
sidecar wrote:
greetings all..
I have been chasing my tail around the internet to figure out if its possible to mount a C/Y D18/4 MM type to my 5D. There is a lot of advice that says it wont fit, but occasionally I fall over examples that suggest a D18/4 will fit. I find myself with no clear message on this combination.
That circumstance presents several scenarios to me, that the lens fits if:
1/- What I am hearing about are AE type, not an MM type which will never fit
or given its possible MM type
2/- it doesnt have infinity focus, being on a thick adapter to clear
or...and perhaps including
3/- Whatever impediments there are on the lens are removed and the mirror is trimmed sufficient for its path to clear the lens.
or failing any engineering solution
4/- condition of last resort, shoot the lens mirror up on an adapter with correct lens register, zone focussed
so question 1 is, is my reasoning right on this
and is there a 'right' path
any further information, no matter how trivial, would be most welcome
cheers |
|
| Back to top |
|
 |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Fri Jul 10, 2009 12:03 am Post subject: |
|
 Posted: Fri Jul 10, 2009 12:03 am Post subject: |
|
|
Orio wrote:
#1 does not seem to be true. I have a AE and I also tried a MM and neither cleared the mirror of a 5D / 5DmkII FOR ME (Trifox's 5DMkII seems to have no problem)
#2 I think it's the most logical and probable
#3 I heard this was done by some but I strongly advice against it. Tests made with gaffer tape to protect the rear glass showed me that possiblr mirror hits can impact both the plastic protection AND the rear glass directly.
#4 this is what is possible to do on a 5DMkII using liveview function.
Liveview in fact lets you use most lenses that are not useable with normal reflex view. You have to be careful though to quickly turn focus or remove lens after shot because when Liveview after some seconds turns itself off, the mirror falls... and you don't want it to find the lens on it's course back to the lower position...
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
sidecar
Joined: 09 Jul 2009 Posts: 10
|
 Posted: Fri Jul 10, 2009 6:15 am Post subject: |
|
 Posted: Fri Jul 10, 2009 6:15 am Post subject: |
|
|
sidecar wrote:
thanks for the reply Orio..
Yes its interesting that there are still D18/4 getting around that actually fit, where most of them dont. There must be something else going on either a variation of lenses, or differences in 5D type mirrorboxes/mirrors that is so far unrecorded. Just adding to the confusion is the variation in adpter thicknesses.
I guess I shall have to wait for the lens to arrive and dimension it against the mirrorbox, and see where to go with it from there. I dont much fancy shooting it blind, but the colours of the D18 MM are to die for in my intended role. |
|
| Back to top |
|
 |
Orio
Joined: 24 Feb 2007 Posts: 29545 Location: West Emilia
Expire: 2012-12-04
|
 Posted: Fri Jul 10, 2009 8:34 am Post subject: |
|
 Posted: Fri Jul 10, 2009 8:34 am Post subject: |
|
|
Orio wrote:
The best thing about the Distagon 18 is that it is super resistant to lens flare.
It is maybe not the sharpest of 18mm lenses (I bet that Nikkors are sharper) but for me, when you shoot 18mm the flare resistance is #1 concern. Shots with 18mm on a small format (film or digital) are not going to be super sharp anyway for simple phisical limitation of the medium. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Back to top |
|
 |
sidecar
Joined: 09 Jul 2009 Posts: 10
|
 Posted: Fri Jul 10, 2009 11:41 am Post subject: |
|
 Posted: Fri Jul 10, 2009 11:41 am Post subject: |
|
|
sidecar wrote:
yes I dont know what I am going to go for if this doesnt work out. Probably another Zeiss of some description, but I cannot afford a 21 right now. |
|
| Back to top |
|
 |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
 Posted: Sat Jul 11, 2009 11:28 am Post subject: |
|
 Posted: Sat Jul 11, 2009 11:28 am Post subject: |
|
|
trifox wrote:
| Orio wrote: |
The best thing about the Distagon 18 is that it is super resistant to lens flare.
It is maybe not the sharpest of 18mm lenses (I bet that Nikkors are sharper) but for me, when you shoot 18mm the flare resistance is #1 concern. Shots with 18mm on a small format (film or digital) are not going to be super sharp anyway for simple phisical limitation of the medium. |
I have got the D18 MM version -- quite thick adapter and no problem with a mirror -- well, I think a small difference in thickness of the adpator might be critical..
D18 on 5D or 5D MkII?? NICE COLOURS!!! nice, nice ..
and it's good for fast action shots ..
tf _________________ Flickr.com |
|
| Back to top |
|
 |
sidecar
Joined: 09 Jul 2009 Posts: 10
|
 Posted: Sat Jul 11, 2009 12:52 pm Post subject: |
|
 Posted: Sat Jul 11, 2009 12:52 pm Post subject: |
|
|
sidecar wrote:
ah ha!
it was im
do us a favour, put a vernier dial on your adapter and tell us how thick it is
oh and, what brand adapter is it
I see it gets infinity focus by some of your images,
I guess that a virtue of DoF via aperture.. |
|
| Back to top |
|
 |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
 Posted: Sat Jul 11, 2009 9:55 pm Post subject: |
|
 Posted: Sat Jul 11, 2009 9:55 pm Post subject: |
|
|
trifox wrote:
hi sidecar -- yes, I will do so. give me a time on sunday
thanks
tf _________________ Flickr.com |
|
| Back to top |
|
 |
sidecar
Joined: 09 Jul 2009 Posts: 10
|
 Posted: Tue Jul 14, 2009 4:57 pm Post subject: update! |
|
 Posted: Tue Jul 14, 2009 4:57 pm Post subject: update! |
|
|
sidecar wrote:
well the Distagon has arrived wrapped in some equally interesting Japanese newspaper. So I spent a little time making some more or less crude dimensions of the clearances, and I note the rear element is non moving.
It seems the difference between the C/Y mount and the EOS mount is just 45.5-44=1.5mm. And the distance between the rear face of the D18 to the mount is 8.8mm, which means it will protrude inside the mount by 7.3mm at the correct register.
In dimensioning the 5D mirrorbox, there is but 7mm to the edge of the mirror in its mirror up position to the front of the EOS mount flange. Discounting any other impediments such as levers etc, there is a disparity of 0.3mm, which should become less when the arc of the mirror edge is taken into consideration. Although the D18 rearmost part is the rear glass, which projects 1.3mm out from the lens, it seems likely that the rim around the lens rear will be the point of contact.
Seems doable from here...Ive ordered a B grade EOS-C/Y adapter to investigate further, it wont be the adapter I use though (probably).
CONTAX Vario Sonnar T* 28-70mm F3.5-4.5 MM J also now inroute from Japan |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|