MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Is "resin coated" paper polythene paper?
View previous topic :: View next topic  


Reply

I am puzzled by the terms...

and is "fibre based" paper, baryte paper?


Reply

Orio:

Resin-coated papers (RC)

The paper base of resin-coated papers is sealed by two polyethylene layers, making it impenetrable to liquids. Since no chemicals or water are absorbed into the paper base, the time needed for processing, washing and drying durations are significantly reduced in comparison to fibre-based papers. Resin paper prints can be finished and dried within ten to fifteen minutes. Resin-coated papers have improved dimensional stability, and do not curl upon drying.

Fibre-based (FB or Baryta) photographic papers consist of a paper base coated with a baryta. Tints are sometimes added to the baryta to add subtle colour to the final print; however most modern papers use optical brighteners to extend the paper's tonal range.

Most fibre-based papers include a clear hardened gelatin layer above the emulsion which protects it from physical damage, especially during processing. This is called a supercoating. Papers without a supercoating are suitable for use with the bromoil process.

Fibre-based papers are generally chosen as a medium for high-quality prints for exhibition, display and archiving purposes. These papers require careful processing and handling, especially when wet. However, they are easier to tone, hand-colour and retouch than resin-coated equivalents.

Doug

(Info courtesy Wikipedia)

Orio wrote:
I am puzzled by the terms...

and is "fibre based" paper, baryte paper?