MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Plustek 7200
View previous topic :: View next topic  


Reply

Is it worth to take it ?


Reply

Attila, it's not going to be a quantum leap from your V500. If you want to
run with the big dogs, it's Coolscan all the way...


Reply

Katastrofo wrote:
Attila, it's not going to be a quantum leap from your V500. If you want to
run with the big dogs, it's Coolscan all the way...


Just curious -- have you tried the Plustek yet? I've read a number of reviews on the various Plustek 7200 scanners, and the reviewers all seem to rate it higher than flatbeds in terms of image sharpness. D-Max, opinions seem to differ.

I haven't found any reviews yet that test the Plustek for its actual resolution, but there's bound to be at least one out there somewhere.


Reply

Michael, no, haven't tried one. I was thinking about getting one a year
ago (Tiger Direct had them for $200, shipping included). But after reading
several discussions at Photo.net, APUG, etc. I wasn't overly impressed with their findings, or the examples they posted. There was a scanner
that I was trying to get, but is only available in Europe for something like
$379, will check to see if I can find the info on it. Its results did impress
me.

Here's a small discussion of the Plustek on the other forum:

http://forum.manualfocus.org/viewtopic.php?id=12219

The one problem I have is not enough room on my desk for both flatbed
and 35mm film scanner. If I was to say goodbye to medium format, I'd
be after a Coolscan V ED or 5000 series. As I remember, the Plustek fell
down when it came to slides.


Reply

I will receive one in the next few days, and can post a few scans. Here are a few from a fellow Italian on flickr, using the 7300 which should be similar (older model, but with ICE if I'm correct).

Last edited by ludoo on Fri Mar 12, 2010 10:55 pm; edited 2 times in total


Reply

Katastrofo wrote:
There was a scanner
that I was trying to get, but is only available in Europe for something like
$379, will check to see if I can find the info on it. Its results did impress
me.


That would be nice!


Reply

I was torn between the Plustek & the V500. Lack of reviews on the Plustek led me to buy the V500.


Reply

eeyore_nl wrote:
Katastrofo wrote:
There was a scanner
that I was trying to get, but is only available in Europe for something like
$379, will check to see if I can find the info on it. Its results did impress
me.


That would be nice!


It's the Reflecta (or Reflekta) Crystal Scan 7200, 220Euros.


Reply

Plustek will not do the medium format.

As for sharpness with flatbed, there is a simple way.
Forget about the frame recognition etc
And forget about film holders.
Set the scanner not to use any of that.
Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality.


Reply

Orio wrote:

Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality.


Orio, that sounds very interesting! What would you suggest for backlighting then?


Reply

Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner... I will try anti-newton glass..


Reply

eeyore_nl wrote:
Orio wrote:

Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality.


Orio, that sounds very interesting! What would you suggest for backlighting then?


Your scanner will do the backlighting, hence why the antinewton glass - of course it must be a scanner that is capable of scanning film.


Reply

Attila wrote:
Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner...


Based on what I read, the resolvance is slightly superior to that of flatbed Epson film scanners.
But I think in practice you will not see any significant betterment.
Plus the fact that it does not medium format it's a heavy limitation in my opinion. Unless of course you want to also keep the flatbed scanner.


Reply

Orio wrote:
Attila wrote:
Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner...


Based on what I read, the resolvance is slightly superior to that of flatbed Epson film scanners.
But I think in practice you will not see any significant betterment.
Plus the fact that it does not medium format it's a heavy limitation in my opinion. Unless of course you want to also keep the flatbed scanner.


That is what I gleaned from all my reading a year ago and as stated
before, not a quantum leap. And I would have to buy more flat surface
real estate to place it on if I were to buy it.

Attila, the Nikon Coolscan 9000 is the only way to go, since it does both
35mm and 120. I'm sure your wife will understand.... Laughing


Reply

Katastrofo wrote:
Orio wrote:
Attila wrote:
Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner...


Based on what I read, the resolvance is slightly superior to that of flatbed Epson film scanners.
But I think in practice you will not see any significant betterment.
Plus the fact that it does not medium format it's a heavy limitation in my opinion. Unless of course you want to also keep the flatbed scanner.


That is what I gleaned from all my reading a year ago and as stated
before, not a quantum leap. And I would have to buy more flat surface
real estate to place it on if I were to buy it.

Attila, the Nikon Coolscan 9000 is the only way to go, since it does both
35mm and 120. I'm sure your wife will understand.... Laughing


Smile


Reply

Quite a good forum for scanners and problems.

http://www.hybridphoto.com/forums/showthread.php?t=1422&highlight=plustek


Reply

Orio wrote:
Plustek will not do the medium format.

As for sharpness with flatbed, there is a simple way.
Forget about the frame recognition etc
And forget about film holders.
Set the scanner not to use any of that.
Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality.


Doug, (Betterscanning) sells a 4"x 8" sheet of ANR glass for $85, what
I paid for my refurbed Epson scanner. As a cautionary tale, do NOT think
picture frame glass that is dull on one side and shiny on the other will
work as well. It doesn't. Dumkin me tried this and the colors, sharpness,
were crap. Additionally it added a haze to the image like the film was
fogged. I wanted to claw my eyes out with a fork after seeing this.

Maybe ANR glass is cheaper in Europe.


Reply

Katastrofo wrote:

Maybe ANR glass is cheaper in Europe.


Actually, it is very difficult to find, at least here in Italy.
My solution was to buy two extra AN 6x7 glasses for my Durst enlarger carrier.
What I do is to place one on one side of the strip, and the other one on the other. This way the film is held down flat. The frames in the middle are not glass covered but that does not matter, the light goes through just the same.

The sharpness you achieve this way is stunning. Much better than when you put film in the holders.

I would like to have one piece of AN glass the same size of my scanners' surface, but I was not able to find a commercial source. If any of you know of a commercial source of ANR glass in the EU, please let me know.
-


Reply

Katastrofo wrote:
As a cautionary tale, do NOT think picture frame glass that is dull on one side and shiny on the other will work as well. It doesn't. Dumkin me tried this and the colors, sharpness, were crap. Additionally it added a haze to the image like the film was fogged. I wanted to claw my eyes out with a fork after seeing this.


Oh crap, maybe that's why my 4490 produces such awfully blurry scans...

Orio, what kind of negative holder did you buy that has antinewton glass inside?


Reply

ludoo wrote:

Orio, what kind of negative holder did you buy that has antinewton glass inside?


The one that fits my enlarger, the Durst 605.
But it does not matter which type, for scanner use you can get any that will cover at least one frame of the film you use.
It does not even have to be an enlarger glass, you can buy much cheaper slide frames with antinewton glass, like those of Gepe. I bought the Durst glasses because I have a double use for them, otherwise I would have bought the Gepe slide frames.


Reply

Orio wrote:
Katastrofo wrote:

Maybe ANR glass is cheaper in Europe.


Actually, it is very difficult to find, at least here in Italy.
My solution was to buy two extra AN 6x7 glasses for my Durst enlarger carrier.
What I do is to place one on one side of the strip, and the other one on the other. This way the film is held down flat. The frames in the middle are not glass covered but that does not matter, the light goes through just the same.

The sharpness you achieve this way is stunning. Much better than when you put film in the holders.

I would like to have one piece of AN glass the same size of my scanners' surface, but I was not able to find a commercial source. If any of you know of a commercial source of ANR glass in the EU, please let me know.
-

What about take glass from a broken scanner ?


Reply

Attila, scanner glass is not usually anti-newton.

I found Gepe 6x6 slides holders with anti-newton glass in the UK, a pack of 20 costs 11.99£. The only problem is they appear to only ship to the UK. If there are a few people interested, and an enteprising UK member, we could split a pack and he gets to keep his share for free. Two or three holders each will be enough for most uses, and really cheap even including postage. Anybody up for this?


Reply

I can order some if you like. Surely Gepe is available all over though?


Reply

Xpres wrote:
I can order some if you like. Surely Gepe is available all over though?


A few searches later, and I found them at the local pro photo store. The good thing is can go pick them up, the bad things are that a) they are backordered, and b) they cost 21€+VAT, so more than double the UK price.

If there's a few people interested we could split a box either from the UK (if Xpres does not mind), or from here. If not, well I guess I'll buy a box anyway.


Reply

I don't mind - just give me the word.