MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Fungus removal
View previous topic :: View next topic  


Reply

Could someone please direct me to a thread with effective techniques in cleaning fungus off of lenses?? My search seemed in vain. If there isn't a thread, I'd be happy to know what's worked best for you.


Reply

This will sound strange but it does work (many techs use it as well).
Use Ponds Cold Cream to remove the fungus and then some denatured alcohol to remove any residue from the PCC. Wink

I have used H2o2 as well 10% solution. Not the weak stuff you find at the druggist.
Careful with that stuff though. It is terrible for skin. Can be purchased at farm supply stores and maybe horticulture shops.


Cheers
Andy


Reply

drjaxon wrote:
Could someone please direct me to a thread with effective techniques in cleaning fungus off of lenses??


Zeiss

http://www.zeiss.com/c12567a8003b58b9/Contents-Frame/29cd78d56723da79c12571180042df52

Ponds is made with mineral oil, surficants, and distilled water, whipped (homogenized). Interestingly, Ponds and tap water is the best lubricant for Trombone slides!


Reply

Hello,

+1 for Cold Cream (Pond's, Avene, or whatever you find where you live ...)
The cold cream is the oldest cosmetic known (source Wikipedia), and works like a charm for removing fungus: http://k10dpentax.blogspot.com/search/label/Zeiss%20Biometar%2080%20f2.8

Hope this helps

Best regards


Reply

hipoclorito of sodium. If the coated don't get off, it will be OK.

Not fungus, not grease, not anything (no lens?) Laughing


Reply

Maybe this link might give you some ideas for dealing with fungus
http://www.mypentax.com/Fungus.html


Reply

My daughter got me some "cleansafe" lens cleaner which I tried on a lens with some mould (and old nicotine or tar) and it lifted everything of with barely a wipe. Magic!

I don't know if I was just lucky or if this stuff will remove all sorts of mould. It is this http://www.solotechnic.co.uk/clean-safe-optical-cleaner-i29012.html

Maybe others with mouldy lenses could give it a try. It would be nice if we could find a safe, effective cleaner.


Reply

Attila has a good formula.


Reply

From http://www.mypentax.com/Fungus.html
Quote:
According to Leitz, a fungus treatment of 94% distilled water, 4% clear ammonia, and 2% hydrogen peroxide should be used. The lens element should be soaked in the mixture for an hour or more before cleaning.


Attila and others who may have used that mix, what percentages do you use? I think i'm going to try this method


Reply

I use maximum concentration what is available on market smelly like hell and dangerous be careful this cocktail destroy any protein within a nano second doesn't matter your skin or fungus. Very effective !

Perhaps 30% ammonia and 15% hidrogen peroxide I am not sure I bought them in chemical shop.


Reply

I happen to have some concentrated peroxide for printed circuit board prototypes and i have ammonia for cleaning too, so i'm going to try tonight. I'll have to open the window for ventilation I guess. I'm going to clean a Canonet I just received, it has a bit of fungus in the rear element, in the outer part, not too bad, just a bit here and there, fortunatey i won't have to open it up. I suppose with the concentrations you use the fungus will be destroyed right away Very Happy thanks for the info


Reply

Mix them out door into small narrow necked plastic bottle and take out just a few drop to lens surface. In this amount will acceptable smelly and easier to control . Don't mix in room even at open window and ventilation.


Reply

If this is the sort of extreme chemistry you are resorting to, I really think a test of that cheap, harmless lens cleaner I posted about might be worth considering. It has worked for me with two lenses.


Reply

I use distilled white vinegar to kill the fungus, clean it, then follow up with Ronsonol to clean any residue.

I have not seen any fungus come back!!


Reply

The problem I have is, i used some lens cleaning cloths, and that removed the apparent fungus, but upon closer inspection with a powerful light (or shining one and looking through the lens), you can see a diffuse mark in the surface. Should that go away or is it a permanent etching made by the fungus? it didn't look like a bad case, just a regular or mild one, i don't know...

So, I've tried with ammonia and peroxide and it hasn't worked. My ammonia is household ammonia so that could be the reason... 30% ammonia must be really annoying to use due to massive fumes. But my peroxide is concentrated, it turns the skin white on touch. I'll try other methods tomorrow. Ponds cream and lighter fuid, most likely, anyway i'm not a big fan of lighter fluid for anything, it's a crude mixture of hydrocarbons that can dissolve things you don't intend to dissolve and also leave residues. PaulC, what's the substance you used made of?

Here is a photo of the marks on the rear glass as they are now. Not noticeable normally, i put a strong light at the right angle. Also visible wih powrful light through the lens.


Last edited by naplam on Fri May 01, 2009 12:20 pm; edited 1 time in total


Reply

If etched glass that is non removable with any chemical quite common problem on fungused lenses.


Reply

Attila wrote:
If etched glass that is non removable with any chemical quite common problem on fungused lenses.

I see :/ would you say the photo looks like etched glass or still improperly cleaned fungus?


Reply

naplam wrote:
Attila wrote:
If etched glass that is non removable with any chemical quite common problem on fungused lenses.

I see :/ would you say the photo looks like etched glass or still improperly cleaned fungus?

I can't say anything from photo, try it with strong material and if also not works , you can't do more.


Reply

Hello,

naplam wrote:

[snip]
Ponds cream and lighter fuid, most likely, anyway i'm not a big fan of lighter fluid for anything, it's a crude mixture of hydrocarbons that can dissolve things you don't intend to dissolve and also leave residues.
[snip]


Lighter fluid, such as the Zippo one (but i guess Ronsonol is the same), is almost 100% pure kerosene, and the residuals may be easily removed with an optical cleaning fluid and a a microfiber cloth ...

If i were you i would give a try to the cold cream (if in doubt, you can check the results of cleaning a fungus with cold cream on my blog) ...

Cheers


Reply

I have had very good success using household ammonia to remove fungus - gentle swabbing with a Q-tip soaked in ammonia has worked in most cases. Sometimes I have had a mark or two left, like you describe, and have found that a lens-pen type cleaner achieves good results in improving these. It depends on how long the fungus has been there, how aggressive it has been, and whether or not it has attacked the coatings or etched the glass.

Regards

Angus


Reply

indianadinos wrote:
If i were you i would give a try to the cold cream (if in doubt, you can check the results of cleaning a fungus with cold cream on my blog)
Cheers

Yes, I've seen your blog, I'll definitely try your method too.

Photomac wrote:
I have had very good success using household ammonia to remove fungus - gentle swabbing with a Q-tip soaked in ammonia has worked in most cases.

That's more or less what I did, but also with peroxide as well as ammonia.