MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

First impressions with the Olympus universal XXX Adapter
View previous topic :: View next topic  


Reply

After a long wait, I finally got it. According the specifications I should be able of mounting most of my manual lenses with it, so I was really excited. The adapter has been already shown in this forum:

http://forum.mflenses.com/olympus-e-4-3s-system-and-manual-focus-lenses-t3360,start,15.html

The adapter is solid, having eight screws to fix onto the lenses:





To try it I took an old mate: the Minolta 50mm 1.7 coming with the Minolta X300 long ago. The lens is well conserved, very little useage since I put the Tamron 35-135 from the first day and used it heavily.

At first it was difficult to realize how to mechanically fit the adaptor to the lens: At the end it was easy, just unscrewing all the screws until they remain at the adapter level and then screwing them in sequence by small amounts of torque.

Once mounted and fit into the camera, it was not really able to reach infinity. Reading on the forum, I noticed that for the MD lenses, there was a shim that should be taken out from the back of the lens.





Once taken out, the infinity focus was almost reached, (it lacks a little but it's close). I've had no time yet to test extensively the lens on the camera.
But I'm worried by the fact that after taking the adapter out, there were visible scratches on the lens, where the screws pressed the lens base.








The reason is that there isn't any kind of protection in between the lens and the screw in none of the two different kind of screws:





To me this is enough to seriously think if I'll be using it other than with bizarre lenses. The mechanical design needs an improvement, for sure.

Anyone else has tried it?. If so, which are your opinions?.

Kind regards,

Jes.


Reply

I did use till it was stolen I used for tests to those lenses what I get without matched adapter. This adapter is very nice for this purposes you able to mount many "strange" lenses. I never used for my collectible lenses for those lenses I always use matched adapter.
I believe this is an excellent idea and we can use with many lenses.


Reply

I am thinking it might be OK if one were to cut a thin piece of banding material to protect lenses from the screws.


Reply

cledry wrote:
I am thinking it might be OK if one were to cut a thin piece of banding material to protect lenses from the screws.


Yes, you're right. Maybe the model could be improved putting some protective short metalic strip under each screw.
By now I thought in putting a thin rubber band around the lens to protect them.

Kind regards,

Jes.


Reply

Attila wrote:
I did use till it was stolen I used for tests to those lenses what I get without matched adapter. This adapter is very nice for this purposes you able to mount many "strange" lenses. I never used for my collectible lenses for those lenses I always use matched adapter.
I believe this is an excellent idea and we can use with many lenses.


Yes Attila, you're right. It's nice for lenses that there is no adapter for them (that's what I called "bizarre lenses"). I misunderstood the concept and I was thinking of it to use as an universal adapter for all the lenses.

So I need to get a flanged M42 adapter for the E-330, but I've found none. All the ones I can get from the bay, are whitout flange.
Do you know of any?.

I really don't understand why all the other brands have plenty of offers for flanged M42 adapters, but not in Olympus. Do you know if there is any technical reason behind this?.

(Maybe it's my fault and I've been unable of finding any...).

Kind regards,
Jes.


Reply

I never seen any flanged adapter, reason is lazy maker only.


Reply

Jes ... i talked to Attila and i will try to come up with a 'custom' version of this Oly adapter.


Reply

hk300 wrote:
Jes ... i talked to Attila and i will try to come up with a 'custom' version of this Oly adapter.


Nice to hear!...

Kind regards,
Jes.


Reply

Attila wrote:
I never seen any flanged adapter, reason is lazy maker only.


Hi Attila, finally I found a flanged one!!
A German manufacturer makes it, however it's not chipped. Anyway the Dandelion chip could be glued on it, so I'll be trying this setup...


Click here to see on Ebay

Kind regards,
Jes.


Reply

Jesito wrote:

Hi Attila, finally I found a flanged one!!
A German manufacturer makes it, however it's not chipped. Anyway the Dandelion chip could be glued on it, so I'll be trying this setup...

Click here to see on Ebay

Kind regards,
Jes.



LOL ... for this price EUR35 ... i could make you a custom M42-4/3 adapter!


Reply

hk300 wrote:
Jesito wrote:

Hi Attila, finally I found a flanged one!!
A German manufacturer makes it, however it's not chipped. Anyway the Dandelion chip could be glued on it, so I'll be trying this setup...

Click here to see on Ebay

Kind regards,
Jes.



LOL ... for this price EUR35 ... i could make you a custom M42-4/3 adapter!


Really?? Please do it LOL LOL

Jes.


Reply

Alex if it has the right thickness and focuses to infinity i'll take one. Cool

One question about this adapter,
I have a tendency to hold my camera partly by the lens and camera body and I'd be worried of the lens just slipping off from the adapter and having my gear meet with the ground.
How well does it holds the lens in?


Reply

Hold fine , no trouble I think.