| View previous topic :: View next topic |
| Author |
Message |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Sat Feb 28, 2009 10:37 pm Post subject: First impressions with the Olympus universal XXX Adapter |
|
 Posted: Sat Feb 28, 2009 10:37 pm Post subject: First impressions with the Olympus universal XXX Adapter |
|
|
Jesito wrote:
After a long wait, I finally got it. According the specifications I should be able of mounting most of my manual lenses with it, so I was really excited. The adapter has been already shown in this forum:
http://forum.mflenses.com/olympus-e-4-3s-system-and-manual-focus-lenses-t3360,start,15.html
The adapter is solid, having eight screws to fix onto the lenses:
To try it I took an old mate: the Minolta 50mm 1.7 coming with the Minolta X300 long ago. The lens is well conserved, very little useage since I put the Tamron 35-135 from the first day and used it heavily.
At first it was difficult to realize how to mechanically fit the adaptor to the lens: At the end it was easy, just unscrewing all the screws until they remain at the adapter level and then screwing them in sequence by small amounts of torque.
Once mounted and fit into the camera, it was not really able to reach infinity. Reading on the forum, I noticed that for the MD lenses, there was a shim that should be taken out from the back of the lens.
Once taken out, the infinity focus was almost reached, (it lacks a little but it's close). I've had no time yet to test extensively the lens on the camera.
But I'm worried by the fact that after taking the adapter out, there were visible scratches on the lens, where the screws pressed the lens base.
The reason is that there isn't any kind of protection in between the lens and the screw in none of the two different kind of screws:
To me this is enough to seriously think if I'll be using it other than with bizarre lenses. The mechanical design needs an improvement, for sure.
Anyone else has tried it?. If so, which are your opinions?.
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Sat Feb 28, 2009 11:34 pm Post subject: |
|
 Posted: Sat Feb 28, 2009 11:34 pm Post subject: |
|
|
Attila wrote:
I did use till it was stolen I used for tests to those lenses what I get without matched adapter. This adapter is very nice for this purposes you able to mount many "strange" lenses. I never used for my collectible lenses for those lenses I always use matched adapter.
I believe this is an excellent idea and we can use with many lenses. |
|
| Back to top |
|
 |
cledry
 Joined: 22 Dec 2008 Posts: 142 Location: Orlando, FL USA
|
 Posted: Sun Mar 01, 2009 12:21 am Post subject: |
|
 Posted: Sun Mar 01, 2009 12:21 am Post subject: |
|
|
cledry wrote:
I am thinking it might be OK if one were to cut a thin piece of banding material to protect lenses from the screws. |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Sun Mar 01, 2009 8:25 am Post subject: |
|
 Posted: Sun Mar 01, 2009 8:25 am Post subject: |
|
|
Jesito wrote:
| cledry wrote: |
| I am thinking it might be OK if one were to cut a thin piece of banding material to protect lenses from the screws. |
Yes, you're right. Maybe the model could be improved putting some protective short metalic strip under each screw.
By now I thought in putting a thin rubber band around the lens to protect them.
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Sun Mar 01, 2009 8:34 am Post subject: |
|
 Posted: Sun Mar 01, 2009 8:34 am Post subject: |
|
|
Jesito wrote:
| Attila wrote: |
I did use till it was stolen I used for tests to those lenses what I get without matched adapter. This adapter is very nice for this purposes you able to mount many "strange" lenses. I never used for my collectible lenses for those lenses I always use matched adapter.
I believe this is an excellent idea and we can use with many lenses. |
Yes Attila, you're right. It's nice for lenses that there is no adapter for them (that's what I called "bizarre lenses"). I misunderstood the concept and I was thinking of it to use as an universal adapter for all the lenses.
So I need to get a flanged M42 adapter for the E-330, but I've found none. All the ones I can get from the bay, are whitout flange.
Do you know of any?.
I really don't understand why all the other brands have plenty of offers for flanged M42 adapters, but not in Olympus. Do you know if there is any technical reason behind this?.
(Maybe it's my fault and I've been unable of finding any...).
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Sun Mar 01, 2009 1:52 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 1:52 pm Post subject: |
|
|
Attila wrote:
I never seen any flanged adapter, reason is lazy maker only. |
|
| Back to top |
|
 |
hk300
 Joined: 30 Oct 2008 Posts: 1041 Location: Hong Kong
|
 Posted: Sun Mar 01, 2009 2:06 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 2:06 pm Post subject: |
|
|
hk300 wrote:
Jes ... i talked to Attila and i will try to come up with a 'custom' version of this Oly adapter. _________________ No longer member , please don't try to contact to him |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Sun Mar 01, 2009 5:06 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 5:06 pm Post subject: |
|
|
Jesito wrote:
| hk300 wrote: |
| Jes ... i talked to Attila and i will try to come up with a 'custom' version of this Oly adapter. |
Nice to hear!...
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Sun Mar 01, 2009 5:10 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 5:10 pm Post subject: |
|
|
Jesito wrote:
| Attila wrote: |
| I never seen any flanged adapter, reason is lazy maker only. |
Hi Attila, finally I found a flanged one!!
A German manufacturer makes it, however it's not chipped. Anyway the Dandelion chip could be glued on it, so I'll be trying this setup...
Click here to see on Ebay
Kind regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
hk300
 Joined: 30 Oct 2008 Posts: 1041 Location: Hong Kong
|
 Posted: Sun Mar 01, 2009 5:20 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 5:20 pm Post subject: |
|
|
hk300 wrote:
| Jesito wrote: |
Hi Attila, finally I found a flanged one!!
A German manufacturer makes it, however it's not chipped. Anyway the Dandelion chip could be glued on it, so I'll be trying this setup...
Click here to see on Ebay
Kind regards,
Jes. |
LOL ... for this price EUR35 ... i could make you a custom M42-4/3 adapter! _________________ No longer member , please don't try to contact to him |
|
| Back to top |
|
 |
Jesito
 Joined: 24 Aug 2007 Posts: 5745 Location: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posted: Sun Mar 01, 2009 6:28 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 6:28 pm Post subject: |
|
|
Jesito wrote:
| hk300 wrote: |
| Jesito wrote: |
Hi Attila, finally I found a flanged one!!
A German manufacturer makes it, however it's not chipped. Anyway the Dandelion chip could be glued on it, so I'll be trying this setup...
Click here to see on Ebay
Kind regards,
Jes. |
LOL ... for this price EUR35 ... i could make you a custom M42-4/3 adapter! |
Really?? Please do it LOL LOL
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Back to top |
|
 |
shadows
 Joined: 17 Feb 2009 Posts: 122 Location: Canada
|
 Posted: Sun Mar 01, 2009 6:45 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 6:45 pm Post subject: |
|
|
shadows wrote:
Alex if it has the right thickness and focuses to infinity i'll take one.
One question about this adapter,
I have a tendency to hold my camera partly by the lens and camera body and I'd be worried of the lens just slipping off from the adapter and having my gear meet with the ground.
How well does it holds the lens in? |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Sun Mar 01, 2009 7:24 pm Post subject: |
|
 Posted: Sun Mar 01, 2009 7:24 pm Post subject: |
|
|
Attila wrote:
Hold fine , no trouble I think. |
|
| Back to top |
|
 |
|
|