Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Rolleiflex SL35E
View previous topic :: View next topic  


PostPosted: Tue Apr 10, 2012 3:28 pm    Post subject: Rolleiflex SL35E Reply with quote





Body was bought recently from eBay for about $20 total. Described as "parts only."

Arrived in near-mint condition. The only thing wrong was a roll of film inside in need of rewinding -- everything works!

The lens came from a recent flea market sale for about $15 and is worn but works fine and is optically clean.

I am pleasantly surprised with this very nice camera -- the last of the SL-series and completely different from the earlier SLs. Electronic metal blade shutter with speeds of 1/1000 to 16 seconds and 1/125 flash sync. Metered Manual or Aperture Priority Auto exposure modes. Aperture and shutter speed visible in finder. Diagonal split image focusing aid. Accepts conventional cable releases. Accepts 2 motor drive accessories. This camera also has a very quiet shutter -- one of the quietest SLRs I've handled.

The body also came with a sliding viewfinder black-out accessory for tripod use which would probably sell for $20 by itself!

The lens I have for it is older and has the first version of the QBM mount without aperture simulation so must be used in stop-down mode with this camera which normally uses the 2nd version of the mount. Not a big deal but I'm now looking for a deal on a later version lens for it.


PostPosted: Tue Apr 10, 2012 9:14 pm    Post subject: Reply with quote

A very good buy congrats.


PostPosted: Sun Apr 15, 2012 3:16 am    Post subject: Re: Rolleiflex SL35E Reply with quote

dof wrote:
The only thing wrong was a roll of film inside in need of rewinding -- everything works!


the only issue that I've encountered with the 35sl is advancing the film. The sprocket notches tend to jump out of the film holes. So, as a solution, when loading, I secure the leader with a small piece of tape to the tale-up roll. So far, no problems. When rewinding, it's easy to tell when one gets to that last (the first edge) of film. The tape usually stays connected to the roller and not the film, but I don't imagine a problem if it did stay connected to the film.
BTW, excellent lens!!! Very Happy


PostPosted: Tue Apr 17, 2012 5:19 pm    Post subject: Reply with quote

^ Thanks for the tip. Very Happy