MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Meyer 30 3.5 - focus ring problem
View previous topic :: View next topic  


Reply

Hello! You who has seen this lens before might know this problem. The focus ring was turning heavily so I decided to do the first repair of my own.

I opened it up, cleaned away old oil and added new litium grease as recomended by a lot of people.

We number the parts from the left 1-4.

After the cleaning and assembling part 3 (consists of 2 rings) focus ring moves very nicely. Even when I put part 3 on part 2 it moves smooth. The problem is probably the bolts on part 3 (you can see one on the left side of it sticking out). When I put on part 4 everything gets hard to turn. The part 4 puts pressure on two springs that pushes the bolts in to part number 2.

Is there anything to do about this? The springs are quite hard to fit, but I think I got them in where they should be, tried a couple of times.

As you can see in the picture I've got another 30 and it is much easier to focus, but I'm not opening it as I might get the same issue ^^

Thanks