MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Konica Auto S2
View previous topic :: View next topic  


Reply

Looks old stock never used.... easy nothing works on it I never received such a dead camera.


#1


Reply

Still looks nice on a display cabinet! Wink


Reply

stingOM wrote:
Still looks nice on a display cabinet! Wink


Oh yes I give her to a chance to go alive again may fixable.


Reply

Be careful of the meter cell in the lens barrel. It makes lens disassembly much more difficult than the usual rangefinders.
Normally on the Auto S version (meter on the body) it just needs a little lighter fluid (naptha) in the shutter.


Reply

luisalegria wrote:
Be careful of the meter cell in the lens barrel. It makes lens disassembly much more difficult than the usual rangefinders.
Normally on the Auto S version (meter on the body) it just needs a little lighter fluid (naptha) in the shutter.


Thank you!


Reply

such a beauty!
all dead? shutter doesn't fire? hm...for as far as i know this camera is supposed to work without battery too!
( for electrical failure corroded wires to the battery chamber are all too frequent, I'd first try to get the battery check working )
I guess you have seen this: http://www.cameramanuals.org/konica/konica_auto_s2.pdf


Reply

kuuan wrote:
such a beauty!
all dead? shutter doesn't fire? hm...for as far as i know this camera is supposed to work without battery too!
( for electrical failure corroded wires to the battery chamber are all too frequent, I'd first try to get the battery check working )
I guess you have seen this: http://www.cameramanuals.org/konica/konica_auto_s2.pdf


Thank you! Entirely dead , shutter is locked I can't knock it with film wind arm stuck , RF not works, I didn't put batter into after these.


Reply

Attila wrote:
kuuan wrote:
such a beauty!
all dead? shutter doesn't fire? hm...for as far as i know this camera is supposed to work without battery too!
( for electrical failure corroded wires to the battery chamber are all too frequent, I'd first try to get the battery check working )
I guess you have seen this: http://www.cameramanuals.org/konica/konica_auto_s2.pdf


Thank you! Entirely dead , shutter is locked I can't knock it with film wind arm stuck , RF not works, I didn't put batter into after these.


oh Embarassed


Reply

I had one of those - dead as yours then my repairmen have fixed it. So i guess jammed shutter is a common fault on those.


Reply

std wrote:
I had one of those - dead as yours then my repairmen have fixed it. So i guess jammed shutter is a common fault on those.


Nice to hear you could solve it, thank you!


Reply

Very nice looking, what language is the manual? Smile


Reply

Katastrofo wrote:
Very nice looking, what language is the manual? Smile


English I think I am planing to scan and share.


Reply

Jammed shutter on these can be easy to fix, I have fixed 3 - 2 Auto S, one S2 - if you can work around the meter cell wiring on the S2. I had to cut the wires. The Auto S is much easier to fix.

Do not force the wind arm, it can bend the cocking shaft that connects to the shutter. Get the shutter free first with naptha. When you have dismantled the front of the lens you can cock and release the shutter without forcing the wind arm. If its working OK you can try doing it normally.

I also have an S2 where someone forced the wind arm/cocking lever. Its a mess inside, hopeless case. cocking shaft is bent, which has bent components of the shutter.


Reply

Many thanks again!