| View previous topic :: View next topic |
| Author |
Message |
claesh
Joined: 24 May 2009 Posts: 13 Location: Sweden
|
 Posted: Sun May 24, 2009 6:30 pm Post subject: Exploded view Canon FD? |
|
 Posted: Sun May 24, 2009 6:30 pm Post subject: Exploded view Canon FD? |
|
|
claesh wrote:
Hi,
I may have done something stupid, but I started disassembling a Canon FD 50mm 3.5 Macro that I bought used in what I think was pretty poor condition. I have never taken a lens apart before so this is a way to learn as I go. I started from the back side and took pictures as I went. It was quite dirty inside and I intend to clean it. However what I also would like to do is to clean lenses on the inside, if possible.
Now I have come to a point where I don't know how to proceed. There are no obvious screws any more and I think I somehow need to take it apart also from the front. However I don't know how to do that. I think I might be able to turn the plastic barrel used for focusing while holding on to the aluminium tube inside it. The aluminium tube in turn hold the lens package, which turns inside it, but I think have to be careful not to put force on that. If I can take off the plastic barrel I think I will expose more screws that will allow me to remove the lens package from the rest.
I have not found any pictures at all on the net on a FD lens taken apart. However I remember seeing a drawing of an exploded view, but I can not find it any more. Can anyone refer me to some good info?
Thanks,
Claes (who hopes he will not regret this - it was reasonably cheap anyway...) |
|
| Back to top |
|
 |
Attila
 Joined: 24 Feb 2007 Posts: 58002
Expire: 2025-11-18
|
 Posted: Sun May 24, 2009 7:11 pm Post subject: |
|
 Posted: Sun May 24, 2009 7:11 pm Post subject: |
|
|
Attila wrote:
Welcome!
I hope somebody able to help to you soon, unfortunately I have no clue about Canon FD lenses. |
|
| Back to top |
|
 |
supahmario
 Joined: 18 Mar 2009 Posts: 615 Location: Berlin, Germany
|
 Posted: Sun May 24, 2009 7:25 pm Post subject: |
|
 Posted: Sun May 24, 2009 7:25 pm Post subject: |
|
|
supahmario wrote:
hi claesh,
how about posting some pictures of the lens. especially the parts of the lens that dont let you go on would be important to help you! _________________ EOS 5D, EOS 30
Leica-R: Summicron 2/50
QBM: Distagon 2.8/35
PK: Tokina 3.5/17, Porst 1.2/55
M42: S-M-C Takumar 3.5/24, S-M-C Takumar 1.8/55, CZJ MC Sonnar 3.5/135, Jupiter 21M 4/200
|
|
| Back to top |
|
 |
rick44
 Joined: 22 Jan 2008 Posts: 99 Location: Free State, Virginia
|
 Posted: Sun May 24, 2009 7:50 pm Post subject: |
|
 Posted: Sun May 24, 2009 7:50 pm Post subject: |
|
|
rick44 wrote:
I have a partial fd lens repair manual, if it will help. About 2.2MB let me know where to send it.  _________________ Asahi Pentax KM, a few lens,Spotmatic,Canon 350D a few lens.Mamiya RB67, 180mm,127mm,90mm, Mamiya 645 1000S, Mamiya C330,Canon XSi,Canon F-1, Canon AE-1. |
|
| Back to top |
|
 |
claesh
Joined: 24 May 2009 Posts: 13 Location: Sweden
|
 Posted: Sun May 24, 2009 9:01 pm Post subject: Pictures of the lens |
|
 Posted: Sun May 24, 2009 9:01 pm Post subject: Pictures of the lens |
|
|
claesh wrote:
I have uploaded a few simple pictures of the dismantled lens (poor quality, taken by my compact camera since my EOS is connected to my bellows at the moment). What I think I need to do is remove the outer, black barrel (used to turn for focusing) somehow, because all screws I can see I now see the "backside" of. Somehow I think I should make a steady grip of the threaded aluminium (?) barrel without touching the lens package (since it screws inside the barrel) and somehow remove the outer black barrel from it, either by turning or pushing or pulling somehow.
The pictures are here:
http://www.flickr.com/photos/14483885@N00/sets/72157618651889605/
(the last picture in the set shows best what I mean I think)
Thanks,
Claes |
|
| Back to top |
|
 |
magnet-2009
 Joined: 22 Apr 2009 Posts: 505 Location: Greece, Athens
|
 Posted: Sun May 24, 2009 9:10 pm Post subject: |
|
 Posted: Sun May 24, 2009 9:10 pm Post subject: |
|
|
magnet-2009 wrote:
Is the breech version?
If yes then, it might help:
http://rick_oleson.tripod.com/index-161.html _________________ My flickr___ My Wix___ RailPictures |
|
| Back to top |
|
 |
claesh
Joined: 24 May 2009 Posts: 13 Location: Sweden
|
 Posted: Sun May 24, 2009 9:52 pm Post subject: |
|
 Posted: Sun May 24, 2009 9:52 pm Post subject: |
|
|
claesh wrote:
That is the diagram I saw before, but couldn't find again! Thanks! |
|
| Back to top |
|
 |
magnet-2009
 Joined: 22 Apr 2009 Posts: 505 Location: Greece, Athens
|
 Posted: Sun May 24, 2009 10:03 pm Post subject: |
|
 Posted: Sun May 24, 2009 10:03 pm Post subject: |
|
|
magnet-2009 wrote:
At your service sir, save that lens.... _________________ My flickr___ My Wix___ RailPictures |
|
| Back to top |
|
 |
claesh
Joined: 24 May 2009 Posts: 13 Location: Sweden
|
 Posted: Sun May 24, 2009 10:07 pm Post subject: |
|
 Posted: Sun May 24, 2009 10:07 pm Post subject: |
|
|
claesh wrote:
rick44, I sent you a private message with my email address. Much appreciated, thanks! |
|
| Back to top |
|
 |
rick44
 Joined: 22 Jan 2008 Posts: 99 Location: Free State, Virginia
|
 Posted: Mon May 25, 2009 1:56 am Post subject: |
|
 Posted: Mon May 25, 2009 1:56 am Post subject: |
|
|
rick44 wrote:
Just sent to you. Enjoy _________________ Asahi Pentax KM, a few lens,Spotmatic,Canon 350D a few lens.Mamiya RB67, 180mm,127mm,90mm, Mamiya 645 1000S, Mamiya C330,Canon XSi,Canon F-1, Canon AE-1. |
|
| Back to top |
|
 |
trifox
 Joined: 14 May 2008 Posts: 3614 Location: UK
Expire: 2014-05-29
|
 Posted: Mon May 25, 2009 7:55 am Post subject: |
|
 Posted: Mon May 25, 2009 7:55 am Post subject: |
|
|
trifox wrote:
| rick44 wrote: |
| Just sent to you. Enjoy |
hi rick - I don't want to be like a baby
Can I have your FD repair manual too?
I have got a couple of FD lenses and I am about to convert them to EF mount...
many thanks
tf _________________ Flickr.com |
|
| Back to top |
|
 |
rick44
 Joined: 22 Jan 2008 Posts: 99 Location: Free State, Virginia
|
 Posted: Mon May 25, 2009 8:01 am Post subject: |
|
 Posted: Mon May 25, 2009 8:01 am Post subject: |
|
|
rick44 wrote:
Sure pm me an addy. _________________ Asahi Pentax KM, a few lens,Spotmatic,Canon 350D a few lens.Mamiya RB67, 180mm,127mm,90mm, Mamiya 645 1000S, Mamiya C330,Canon XSi,Canon F-1, Canon AE-1. |
|
| Back to top |
|
 |
rick44
 Joined: 22 Jan 2008 Posts: 99 Location: Free State, Virginia
|
 Posted: Mon May 25, 2009 10:53 am Post subject: |
|
 Posted: Mon May 25, 2009 10:53 am Post subject: |
|
|
rick44 wrote:
Done. _________________ Asahi Pentax KM, a few lens,Spotmatic,Canon 350D a few lens.Mamiya RB67, 180mm,127mm,90mm, Mamiya 645 1000S, Mamiya C330,Canon XSi,Canon F-1, Canon AE-1. |
|
| Back to top |
|
 |
rick44
 Joined: 22 Jan 2008 Posts: 99 Location: Free State, Virginia
|
 Posted: Tue May 26, 2009 1:17 pm Post subject: |
|
 Posted: Tue May 26, 2009 1:17 pm Post subject: |
|
|
rick44 wrote:
dnas, done.
Anyone else? _________________ Asahi Pentax KM, a few lens,Spotmatic,Canon 350D a few lens.Mamiya RB67, 180mm,127mm,90mm, Mamiya 645 1000S, Mamiya C330,Canon XSi,Canon F-1, Canon AE-1. |
|
| Back to top |
|
 |
magnet-2009
 Joined: 22 Apr 2009 Posts: 505 Location: Greece, Athens
|
 Posted: Tue May 26, 2009 2:00 pm Post subject: |
|
 Posted: Tue May 26, 2009 2:00 pm Post subject: |
|
|
magnet-2009 wrote:
Yes me, the adds is coming.
Thank you in advance.
I feel like a baby, anyway.  _________________ My flickr___ My Wix___ RailPictures |
|
| Back to top |
|
 |
rick44
 Joined: 22 Jan 2008 Posts: 99 Location: Free State, Virginia
|
 Posted: Tue May 26, 2009 4:03 pm Post subject: |
|
 Posted: Tue May 26, 2009 4:03 pm Post subject: |
|
|
rick44 wrote:
Done. Don't feel like a baby, this is what's it's allabout.  _________________ Asahi Pentax KM, a few lens,Spotmatic,Canon 350D a few lens.Mamiya RB67, 180mm,127mm,90mm, Mamiya 645 1000S, Mamiya C330,Canon XSi,Canon F-1, Canon AE-1. |
|
| Back to top |
|
 |
claesh
Joined: 24 May 2009 Posts: 13 Location: Sweden
|
 Posted: Tue May 26, 2009 9:46 pm Post subject: |
|
 Posted: Tue May 26, 2009 9:46 pm Post subject: |
|
|
claesh wrote:
Thanks to everyone that answered. My conclusion (not tried yet) is that I need to use something like "rubber cups" (http://forum.mflenses.com/viewtopic.php?t=14655&view=next) to remove the inner part of the front of the lens, probably including the "cone" going inwards towards the glass. The link above says it should be pressed and turned left. That is another kind of lens but sounds like the most reasonable thing to me. So I think I will try that. |
|
| Back to top |
|
 |
dnas
 Joined: 14 Nov 2008 Posts: 488 Location: Japan
|
 Posted: Tue May 26, 2009 11:13 pm Post subject: |
|
 Posted: Tue May 26, 2009 11:13 pm Post subject: |
|
|
dnas wrote:
| rick44 wrote: |
dnas, done.
Anyone else? |
Thanks rick, very much appreciated!!!! |
|
| Back to top |
|
 |
magnet-2009
 Joined: 22 Apr 2009 Posts: 505 Location: Greece, Athens
|
 Posted: Wed May 27, 2009 5:44 am Post subject: |
|
 Posted: Wed May 27, 2009 5:44 am Post subject: |
|
|
magnet-2009 wrote:
Done. Thank you very much. _________________ My flickr___ My Wix___ RailPictures |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|