MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

EOS 10qd meter issues
View previous topic :: View next topic  


Reply

Hi folks

I bought a Canon EOS 10qd recently, in great shape, all works fine. But today I decided I wanted to use it without a tripod for the first time. I put on a 28mm lens and went for a walk, didn't get very far before realising something was wrong. With the ISO set to 64 and the camera pointed at a plain whitewashed wall, on a cloudless day, the EOS was telling me the exposure was 3 secs at f8. What? that's surely wrong. So I went home and grabbed my very accurate and reliable handheld meter and compared, same white wall. Handheld meter said 1/40, f8, which sounds right to me. So the EOS is wrong, and wrong by 7-8 stops.

I checked the exposure compensation, that was correctly set to 0.

Is there something I could be doing wrong or is this just yet another reason to hate Canon...

I swore I'd never buy another Canon item months ago, but needed a camera that would use unperforated film, hence the EOS 10qd.


Reply

pretty bad.. I do three things with all camera before I use them,

- shutter speed test
- light meter test id applicable
- light leak test if applicable


Reply

I've been using Canon cameras for most of my life and have never had any inclination to move to another brand. I think you have just been incredibly unlucky with Canon products. Wink Rolling Eyes


Reply

Yes, I was fooled in this case because I was shooting Agfa microfilm in terrible light conditions in it and there is no information at all about how to expose and develop this film, as soon as I put a roll of FP4 in today, it became obvious.

Lesson learnt, next camera I buy with a meter I shall compare it to my handheld meter before using it.

So now I have to find another camera that will use unperf film and isn't a Canon. Most annoying.


Reply

DigiChromeEd wrote:
I've been using Canon cameras for most of my life and have never had any inclination to move to another brand. I think you have just been incredibly unlucky with Canon products. Wink Rolling Eyes


I don't know, the old stuff was okay but since the EOS range was introduced, it all just seems to be cheap and nasty, especially the lenses that are so badly made they often fall apart, which has happened to me on no less than 4 occassions now, I had a 1.8/50 just come apart in my hand, two 18-55 kit lenses that did similar and a 70-300 (I think it was) where the movable front bit just fell out one day. Then both the digital EOS I've owned have been really substandard in IQ compared to other cameras.

I will say this though, the very old FL 2.5/35 I have is a great lens, well it was, aperture and focus have both stuck solid now. Sad


Reply

iangreenhalgh1 wrote:
DigiChromeEd wrote:
I've been using Canon cameras for most of my life and have never had any inclination to move to another brand. I think you have just been incredibly unlucky with Canon products. Wink Rolling Eyes


I don't know, the old stuff was okay but since the EOS range was introduced, it all just seems to be cheap and nasty, especially the lenses that are so badly made they often fall apart, which has happened to me on no less than 4 occassions now, I had a 1.8/50 just come apart in my hand, two 18-55 kit lenses that did similar and a 70-300 (I think it was) where the movable front bit just fell out one day. Then both the digital EOS I've owned have been really substandard in IQ compared to other cameras.

I will say this though, the very old FL 2.5/35 I have is a great lens, well it was, aperture and focus have both stuck solid now. Sad


Honestly, I can't say I've ever had any bad experiences with any Canon kit I've owned. Having said that, I used to have a EOS10 and didn't like it - it was too light and plasticky. I currently have a EOS650, EOS50E, EOS1N, EOS10D and EOS5DMKII and they are all solidly built and well made (maybe the 50E wouldn't take a lot of heavy use!). As for Canon EF lenses, I have four. Two zooms (L series) and two primes (1.8/50 MKI and 4/100 Macro) and they are as well made as most other top brands. The cheaper lenses in their range I haven't had any experience with.


Reply

My old EOS600 film camera is excellent, a well made and very reliable camera. But I rarely use it as I haven't got any really good lenses for it anymore. I agree though that the quality of the Canon cameras took a downward turn, I should have been a natural Canon digital customer after the EOS600 and the many A Series cameras I had, but I bought a Pentax.


Reply

The MKI 1.8/50 is okay in build, but the MkII is junk, Canon should be embarassed to sell such rubbish, they just fall apart after a few months of moderate use. I had a couple of old EF zooms and they were okay in build quality, but the IQ was pathetic, soft with vignetting and distortion even at f8 at the middle of the zoom range.

Anyways, I didn't want this to be a debate about Canon, just wondered if anyone had any suggestions as to where I might be going wrong with this EOS 10qd and it's metering, perhaps some arcane setting I possibly overlooked.


Reply

In which mode are you using it? I think you should switch it to A (aperature priority) and set Aperature to 0.0.
In P the metering is off with manual lenses.


Reply

std wrote:
In which mode are you using it? I think you should switch it to A (aperature priority) and set Aperature to 0.0.
In P the metering is off with manual lenses.


In aperture priority mode with the aperture readout on the LCD panel set to 0.0 you are in stop-down metering mode. Set the required aperture on your lens and the camera will select the correct shutter speed - hopefully! Wink Smile


Reply

This camera won't go to 0.0, it will only let me set 1.0 as a maximum. What I've been doing is using it in Av mode, setting the aperture on the lens, then setting the same aperture on the camera body. I tried it in manual mode too, both seem to make the same error in exposure - about 8 stops, which seems an awful lot, hence I suspected I was doing something wrong, but I can't figure out what, the instructions I found online told me to do it as I have been doing.


Reply

iangreenhalgh1 wrote:
This camera won't go to 0.0, it will only let me set 1.0 as a maximum. What I've been doing is using it in Av mode, setting the aperture on the lens, then setting the same aperture on the camera body. I tried it in manual mode too, both seem to make the same error in exposure - about 8 stops, which seems an awful lot, hence I suspected I was doing something wrong, but I can't figure out what, the instructions I found online told me to do it as I have been doing.


Some EOS film cameras in stop-down mode set 0.0 and some 1.0. The EOS10 is 1.0. Try it again in sd mode using this value on the camera and your chosen aperture on the lens and see what happens. But I suspect the metering on the camera is faulty.


Reply

Yes, don't set the camera aperture to the lens aperture or it will be out. As mentioned, set to 0.0 or 1.0 and leave it there with non-EOS lenses. It's a bizarre system, but the metering will only operate correctly at full aperture.

I thing a chipped adapter may overcome the problem as it will tell the camera the lens is wide open.


Last edited by martinsmith99 on Fri Feb 01, 2013 8:38 pm; edited 1 time in total


Reply

Ah yes it's 1.0 on oldest cameras - on my EOS 650 you must set to Av and set aperature on body to 1.0 and don't change it while stopping down the lens.


Reply

Thanks for the tips guys, I'll try it again today and report on the outcome.


Reply

iangreenhalgh1 wrote:
Thanks for the tips guys, I'll try it again today and report on the outcome.


Any joy?


Reply

Yes, it meters fine in manual mode if you set the aperture to 1.0 on the camera, doesn't work in any other mode. I'm going to replace the EOS with a Nikon f90 soon as it's proving almost impossible to use any M42 lenses on this EOS. I have tried three different M42-EOS adapters and the camera gives a bc error with all 3, I've ground one down to be as thing as possible and it still gives the bc error, but strangely works with my Nikkor 3.5/55 with EOS adapter. I might as well get a Nikon body to use the 3.5/55 as I can also use my Nikkor 2.8/24 that hits the mirror on the EOS.


Reply

I've just tried my EOS600 with a T2 mount and an old Soligor and get no error messages, and it seems to meter OK. This camera will only register '1.0' as well, not zero.
I have used the 600 with manual lenses and it's worked well.

The 'bc' code is usually 'battery check', but it does include other stuff. On this 600 I had a bc code when I installed a new battery and it was the poor fit of the battery, I had to pack the back with a bit of paper. Well, the guy in the Canon dealership did it for me. Rolling Eyes


Reply

It's rather wierd, It was working with M42 lenses for a while, but not I get that bc error and the mirror hangs up. Now, after grinding the adapter down as much as I can, it still hangs the mirror and flashes bc. However, if I unlock the adapter and turn it about 15-20 degrees counterclockwise it will shoot. I winder if the mirror has slipped a little bit? It doesn't look like it has. Why it worked and now it doesn't is beyond me. I'll take the file to the adapter again and see if I can't remove some more metal.