Can D-mount lens be used on Micro 4/3?

[tianqiang0316]

I have boght a steinheil 2.8/36mm lens with D-mount!

Can it be used on Olympus E-P2?

Thanks a lot !

[std]

Hi,
If it is the genuine d-mount lens then the register will be shorter than c-mount and you can use it on Pen but only for close up's. - you need 'c-mount micro 4/3 adapter' and 'd-mount - c-mount ring'. You can expect vignetting on corners. around 38mm it should not be that bad as with wide angles.

if you need to have infinity the lens will require modification (about 5mm from the mount needs to be removed). Sometimes there is no space for this and you can only remove the focusing part and mount it on focusing helicoid. I'm planning to get one of those too and try it myself.

I have lens from Pathescope H 8mm cine camera which has the same thread as the d-mount but the register is longer than c-mount and it can get infinity without modification.
Do you know what was the camera from which it lens came? and a picture of the lens itself will be nice.
_________________
Stefan

My lens list:
SLR FD: Canon FL 1.2/55 MD: Rokkor 1,7/50; Rokkor PF 1.4/58 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar; CZJ 2/5,8cm T Biotar black; Meyer 1.9/58 Primoplan alu; E.Ludwig Meritar 2.9/50; Meyer 2.8/100 Trioplan; CZJ 4/135 Sonnar alu; CZJ 4/135 Triotar alu M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Tokina RMC 2/28 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Schneider-Kreuznach Variogon 1:2/18-90 Y/S: Sun 3.5/38-90, Sun 4/70-210
RF Contax RF: Jipiter-12 2,8/3,5cm; Sonnar 1.5/5cm; Jupiter-8 2/50; Jupiter-9 2/8,5cm; Jupiter-11 4/135 Contax G: CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2,8/90 Sonnar T Pentax A110: 2.8/18; 2.8/24; 2.8/50; 2.8/70

[paulhofseth]

look up the size of the 2x8 format (Dmount); it is a 16mm film slit in two. Even the Super 8 format is very small. I have a Leitz (Schneider) Cinegon 10mm which has no mount problems since the Leitz S8 camera used the M-mount, but the image forms a circle smaller than the shortest dimension of the MFT frame. Used reversed as a macro, however, some Dmounts may fill the frame.

p.

[tianqiang0316]

I upload the lens photo

As I know from internet, the vignetting might not be a problem.

But I dont know where to buy the D-C Adapter.

[std]

That is the ring but it is not an adapter - it will only allow you to mount the d-mount lens onto c-mount adapter.
The register is not changed and the lens can focus only up to 25cm. Click here to see on Ebay
_________________
Stefan

My lens list:
SLR FD: Canon FL 1.2/55 MD: Rokkor 1,7/50; Rokkor PF 1.4/58 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar; CZJ 2/5,8cm T Biotar black; Meyer 1.9/58 Primoplan alu; E.Ludwig Meritar 2.9/50; Meyer 2.8/100 Trioplan; CZJ 4/135 Sonnar alu; CZJ 4/135 Triotar alu M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Tokina RMC 2/28 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Schneider-Kreuznach Variogon 1:2/18-90 Y/S: Sun 3.5/38-90, Sun 4/70-210
RF Contax RF: Jipiter-12 2,8/3,5cm; Sonnar 1.5/5cm; Jupiter-8 2/50; Jupiter-9 2/8,5cm; Jupiter-11 4/135 Contax G: CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2,8/90 Sonnar T Pentax A110: 2.8/18; 2.8/24; 2.8/50; 2.8/70