| View previous topic :: View next topic |
| Author |
Message |
55
 Joined: 13 May 2013 Posts: 773 Location: U.S.
Expire: 2026-07-24
|
 Posted: Fri Aug 15, 2025 9:35 am Post subject: Mount Identification Request |
|
 Posted: Fri Aug 15, 2025 9:35 am Post subject: Mount Identification Request |
|
|
55 wrote:
After checking lens mount identification pages on the internet, I still can't figure this one out. Can anyone here tell me which mount this is?
(Edit: replaced first photo)
#1
#2
#3

Last edited by 55 on Sun Aug 17, 2025 11:27 am; edited 1 time in total |
|
| Back to top |
|
 |
casualcollector
 Joined: 01 Aug 2008 Posts: 754 Location: Spaced out on Florida's Space Coast
|
 Posted: Fri Aug 15, 2025 10:03 am Post subject: |
|
 Posted: Fri Aug 15, 2025 10:03 am Post subject: |
|
|
casualcollector wrote:
Petri breech lock. _________________ In Search Of "R" Serial Soligors
Found: 135/2.8 #R407660, 200/4 #R405526, 300/5.5 #R411127 |
|
| Back to top |
|
 |
55
 Joined: 13 May 2013 Posts: 773 Location: U.S.
Expire: 2026-07-24
|
 Posted: Fri Aug 15, 2025 3:11 pm Post subject: |
|
 Posted: Fri Aug 15, 2025 3:11 pm Post subject: |
|
|
55 wrote:
| casualcollector wrote: |
| Petri breech lock. |
Thanks for the quick reply. My first thought was "Of course, I should've known it was Petri!". Perhaps the non-auto mount had confused me? But then I double checked and it seems this Sonnagar's mount is different from Petri.
It's a little narrower than the mount on Petri branded lenses I have. It wobbles and won't lock when I try to attach it to my Petri FT SLR or Petri to Sony E adapter.
Here's the Sonnagar compared to an actual Petri lens:
#1

Last edited by 55 on Sun Aug 17, 2025 1:19 pm; edited 1 time in total |
|
| Back to top |
|
 |
D1N0
 Joined: 07 Aug 2012 Posts: 2726
|
 Posted: Fri Aug 15, 2025 7:48 pm Post subject: |
|
 Posted: Fri Aug 15, 2025 7:48 pm Post subject: |
|
|
D1N0 wrote:
Whatever mount it is, it is probably attached to a t2-mount. _________________ pentaxian |
|
| Back to top |
|
 |
BrianSVP
 Joined: 09 Jun 2023 Posts: 664 Location: Philadelphia
|
 Posted: Sat Aug 16, 2025 2:04 am Post subject: |
|
 Posted: Sat Aug 16, 2025 2:04 am Post subject: |
|
|
BrianSVP wrote:
The bare brass sections suggest the mount's been modified/remachined. Perhaps a not completely successful attempt to convert a different mount for use on a Petri body? |
|
| Back to top |
|
 |
Alun Thomas
 Joined: 20 Aug 2018 Posts: 801 Location: New Zealand
|
 Posted: Sat Aug 16, 2025 6:00 am Post subject: |
|
 Posted: Sat Aug 16, 2025 6:00 am Post subject: |
|
|
Alun Thomas wrote:
That lens is generally only available in Exakta or M42, I often search for Sonnagar just to see what's out there. I did one time buy a copy with Minolta SR mount, but it was clearly an adaptation, the entire mount was quite roughly fashioned from brass. This lens is fairly early, possibly Komura manufactured just going from the 'S' prefix. I wondered if it maybe Praktina mount, which is similar but it doesn't appear to be. |
|
| Back to top |
|
 |
Alun Thomas
 Joined: 20 Aug 2018 Posts: 801 Location: New Zealand
|
 Posted: Sun Aug 17, 2025 6:37 am Post subject: |
|
 Posted: Sun Aug 17, 2025 6:37 am Post subject: |
|
|
Alun Thomas wrote:
| benadamx wrote: |
| Alun Thomas wrote: |
(Sellers Pic)
One of the more attractively styled early Japanese SLR lenses, a Juplen 135/2.8 for M42, this can also be found as a Sonnagar brand lens. The serial number has an 'S' prefix, which I strongly suspect points to Komura as the manufacturer. Most copies of this lens I have seen are still in excellent condition. |
I have the sonnagar version, in what sure looks to be petri bayonet mount but doesn't quite fit up to a petri body (but does fit my 3D-printed petri adapter) |
Someone else has found a similar lens in the past also. |
|
| Back to top |
|
 |
55
 Joined: 13 May 2013 Posts: 773 Location: U.S.
Expire: 2026-07-24
|
 Posted: Sun Aug 17, 2025 3:11 pm Post subject: |
|
 Posted: Sun Aug 17, 2025 3:11 pm Post subject: |
|
|
55 wrote:
This lens is full of surprises.
| D1N0 wrote: |
| Whatever mount it is, it is probably attached to a t2-mount. |
It didn't occur to me it might be a T mount. It turns out it's not threaded on as T would be, but is held in place by three small screws.
| BrianSVP wrote: |
| The bare brass sections suggest the mount's been modified/remachined. Perhaps a not completely successful attempt to convert a different mount for use on a Petri body? |
Yes, I wondered about the brass. I don't remember seeing a mount like that among my other lenses.
| Alun Thomas wrote: |
| That lens is generally only available in Exakta or M42, I often search for Sonnagar just to see what's out there. I did one time buy a copy with Minolta SR mount, but it was clearly an adaptation, the entire mount was quite roughly fashioned from brass. This lens is fairly early, possibly Komura manufactured just going from the 'S' prefix. I wondered if it maybe Praktina mount, which is similar but it doesn't appear to be. |
Indeed, I have another Sonnagar copy of this lens in M42 mount. I wondered about Praktina mount, but I also thought it didn't quite match from images I found online. And, if I've measured correctly, my lens mount diameter is 49mm (see my first post). According to a reference site, Praktina mount diameter is 46mm:
https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html
The focus ring on this 135 doesn't reach the infinity mark. More than that, it seems to have been reassembled incorrectly because it's much shorter than my M42 copy.
#1
Using the mount from the M42 copy, I mounted the (shorter) lens on a Sony A7ii. As expected, it focuses far beyond infinity.
And the shorter 135's mount is lower profile than the M42.
#2
The brass mount's opening seems surprisingly small (28mm) to me for a 135mm f2.8 lens. I wondered if it was intended for a smaller than 35mm film format? Using a Canon EF to Sony E adapter, I held the 135 up against my Sony A7ii and didn't see any obvious mechanical vignetting with the black baffle in place. And I later found that the baffle unscrews.
#3
#4
 |
|
| Back to top |
|
 |
piokang
Joined: 28 Aug 2025 Posts: 1 Location: https://geometrygame.org/
|
 Posted: Thu Aug 28, 2025 3:56 am Post subject: |
|
 Posted: Thu Aug 28, 2025 3:56 am Post subject: |
|
|
piokang wrote:
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash |
|
| Back to top |
|
 |
DConvert
 Joined: 12 Jun 2010 Posts: 984 Location: Essex UK
|
 Posted: Thu Aug 28, 2025 11:44 am Post subject: |
|
 Posted: Thu Aug 28, 2025 11:44 am Post subject: |
|
|
DConvert wrote:
| piokang wrote: |
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash |
M42 is hardly 'less common' it's possible the most common mount in my hoard!
It's also very easy to confirm, with just a ruler/measure & a male thread item of 1mm or 0.75mm pitch all other threaded possibilities can be ruled out. even without these the only common mount that can't be ruled out with a quick glance is T2 (m42x0.75). There are threads like M44 which I probably would misidentify at a glance but they are much more unusual. |
|
| Back to top |
|
 |
BrianSVP
 Joined: 09 Jun 2023 Posts: 664 Location: Philadelphia
|
 Posted: Thu Aug 28, 2025 1:59 pm Post subject: |
|
 Posted: Thu Aug 28, 2025 1:59 pm Post subject: |
|
|
BrianSVP wrote:
For that matter, Exakta is very common and pretty easy to identify as well. The obvious tipoffs are the narrow throat size and the placement of the stop screw. Variants like the Topcor version have their own tipoffs as well.
Praktina is really the only of the mentioned systems that's uncommon/not immediately obvious.
| DConvert wrote: |
| piokang wrote: |
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash |
M42 is hardly 'less common' it's possible the most common mount in my hoard!
It's also very easy to confirm, with just a ruler/measure & a male thread item of 1mm or 0.75mm pitch all other threaded possibilities can be ruled out. even without these the only common mount that can't be ruled out with a quick glance is T2 (m42x0.75). There are threads like M44 which I probably would misidentify at a glance but they are much more unusual. |
|
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|