Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!
SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Bronica ETRC
Post new topic   Reply to topic
Home   Film SLR / TLR Cameras
View previous topic :: View next topic  


PostPosted: Sun Jul 21, 2024 3:07 pm    Post subject: Bronica ETRC Reply with quote
A couple of questions about a Bronica ETRC.

Will the film insert from an ETRS back fit inside the ETRC?

Why won't the trigger on the speed grip E always fire? Can it be adjusted?


PostPosted: Thu Jul 25, 2024 5:04 pm    Post subject: Reply with quote
camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


PostPosted: Thu Jul 25, 2024 7:27 pm    Post subject: Reply with quote
Doc Sharptail wrote:
camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


Thank you for that. I think I solved the trigger problem
Post new topic   Reply to topic
Home   Film SLR / TLR Cameras
Page 1 of 1