MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

KIEV 4 shutter ribbon repair
View previous topic :: View next topic  


Reply

Hello, everyone Smile

I recently had a Kiev 4 snap a ribbon, so I disassembled it to the shutter part, removed every screw I could find (except for the long one at the top shutter, appears to be stuck),
Despite hours of trying to get it out, I still cant get it out.

I watched a youtube assembly guide (https://youtu.be/NK5azIftsEE?t=114) but I can't get out the long screw like they did - I can only freely rotate the screw 20 degrees or so.

Does anyone know how can I remove it?
If anyone who has experience opening this could provide guidance, I'd greatly appreciate it.
Thanks in advance, murbanrk.

Here I'm sending some photos of the shutter:

#1


#2


#3


#4


#5


#6


#1


#2


Last edited by murbanrk on Thu Dec 07, 2023 6:50 pm; edited 1 time in total


Reply

murbanrk wrote:
Hello, everyone Smile

I recently had a Kiev 4 snap a ribbon, so I disassembled it to the shutter part, removed every screw I could find (except for the long one at the top shutter, appears to be stuck),
Despite hours of trying to get it out, I still cant get it out.

I watched a youtube assembly guide (https://youtu.be/NK5azIftsEE?t=114) but I can't get out the long screw like they did - I can only freely rotate the screw 20 degrees or so.

Does anyone know how can I remove it?
If anyone who has experience opening this could provide guidance, I'd greatly appreciate it.
Thanks in advance, murbanrk.

Here I'm sending some photos of the shutter:

https://drive.google.com/file/d/1-2yHsXdHpFtB9-0nlW8MWToooPs0Kxb4/view?usp=sharing
https://drive.google.com/file/d/15s9msy_twfATzUPWEfX62Y6lq11RhcqM/view?usp=sharing
https://drive.google.com/file/d/18V0UByZT3j5H3sBtFbtF3NMDr7uwhELs/view?usp=sharing
https://drive.google.com/file/d/1EXk4wzoYtmXIsrx1iCn2pkjSiWs5RmSd/view?usp=sharing
https://drive.google.com/file/d/1Hc9FsWowODGn7x_lMQhLWLEDpdoueBx1/view?usp=sharing
https://drive.google.com/file/d/1_8W1EsCaSljJdo7-SWfoAsVapa0QhF99/view?usp=sharing
https://drive.google.com/file/d/1iSyvs9Dx8qc3erm0Q9aIVersLK0YBDai/view?usp=sharing
https://drive.google.com/file/d/1v65yJAx65B6qaFbpyWg5Rbe36IyB0fYC/view?usp=sharing
https://drive.google.com/file/d/1y4IF2yLJOzmrPw7BUp-j_s2AUxg8ALeE/view?usp=sharing
#1


#2


#3


#4


#5


#6


#1


#2


Welcome murbanrk! (images will show now...)


Reply

Thanks Smile


Reply

I once took apart a broken KIEV 60, and found quite a few screws that were stuck or stripped. (I had been the first owner, so that's how it came from the factory).

Also, quite a few chassis parts were made of very brittle pot-metal castings; some screw posts simply broke when trying to undo the screws.

So be careful; my KIEV 60 was early 90's manufacture I think, your KIEV 4 is a 50's camera and may be substantially better made, but it likely also isn't exactly German or Japanese quality engineering...