MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Replacement or repair to shift screw for FD 35mm 2.8?
View previous topic :: View next topic  


Reply

Title is fairly explanatory. I have a Canon FD 35mm 2.8 tilt shift with a slightly bent shift screw. It seems like the shift mechanism is pretty easy to take apart, would it be possible to source a replacement screw, or to straighten the existing screw? It is only slightly bent, a cat accident cause it to drop onto a carpeted floor, the only damage was a slight bent screw. It's a bit annoying, because the lens is in perfectly good condition otherwise.

thanks


Reply

can you post a photo? Smile


Reply

If the problem is only cosmetic, and doesn't affect operation, I would leave it as is.

Bending screws back and forth usually doesn't end well, especially if the screw is aluminium or brass which work-harden; it deforms the thread. If the amount of bending is very marginal, you might take the risk (but it is still a risk, especially with precision-machined threads).