MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Lens mount identification needed
View previous topic :: View next topic  


Reply

Hello everybody
Can any one help me with identification. I have Vivitar Series 1 70-210/3.5 with an unknown for me lens mount It has a pure manual aperture control and marks giving an assumption it was custom converted but the mount looks a factory made. I want to adapt it to M42 of Pentax mount but out of pure curiosity before I remove it I want to know what it was.



Reply

Doesn't look like any of the mounts the lens was made in. This one looks particularly dirty. I would look for another copy.


Reply

I think that is Edixa Rex but I can't swear to it. When I get a chance I will check as I have one at home.


Reply

Thank you for the input jamaeolus and D1N0
It resembles Edixa REX
https://www.ebay.pl/itm/Camera-Edixa-Rex-D-Lens-Shneider-28mm-35mm-50mm-50mm-50mm-135mm-Set-/273674388191
but I think it is different.
The lens is as I purchased it, no serious dirt, fungus or scratch only minor issues.


Reply

Looks like this Contarex mount:
http://forum.mflenses.com/odd-contax-mount-t82484.html


Reply

Oh, never mind.

Last edited by cooltouch on Thu Nov 18, 2021 5:07 pm; edited 1 time in total


Reply

Contarex


Reply

Thank you Lightshow then it is a Contarex adapted Vivitar.


Reply

The mount it was adapted from should still be on the lens near the macro toggle (white button) It says "Lens made in Japan Patents pending" and the the mount type "P/K" for Pentax on mine.


Reply

D1N0 wrote:
Doesn't look like any of the mounts the lens was made in. This one looks particularly dirty. I would look for another copy.


Agree. These lenses are common and cheap. The time and effort that would go into the lens would be far greater than the expense of a good one.


Reply

Hello woodrim I should have cleaned it before taking pictures, sorry.
D1N0, it has U, so it was Universal Mount (M42).


Reply

I'm lost. Surely the way that rear element protrudes from the rear isn't normal. I think there's still a snake in the haystack.


Reply

Is it possible that the mount is missing, and that this is the mating surface for the mount.
It looks to be not a normal protrusion of the rear element as Woodrim has said
Tom


Reply

This is wat the m42 version looks like when complete:


Reply

According to this info: https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html
Contarex register distance is 46 mm, comparable to that of M42 mount.
Below detail of Vivitar Series1 70-210/3.5 with M42 mount. Taking into account that the modified lens has no threaded flange it also protrudes to a certain, comparable degree.
D1N0 we were posting almost the same time Smile


Reply

I need help yet again, I just got this lens and I can not identify the mount. The lens is a telesar hi-d 40-85 3.5. Any help would be greatly appreciated.
#1


#2


#3


#4


#5


#6


Reply

ZoltanB wrote:
I need help yet again, I just got this lens and I can not identify the mount. The lens is a telesar hi-d 40-85 3.5. Any help would be greatly appreciated.

That looks like an M42 screw lens with an M42 to Pentax K adapter screwed on.


Reply

It is fixed mount with manual or auto aperture pin.


Reply

@ ZoltanB.
I like your lens. Let us know how good pls. And then if you're selling... ?? Thaaanks!


Reply

I would love to try this lens but I have no idea about the mount.


Reply

I'd agree with heritagecameras. Looks like a m42 to PK adapter screwed on a M42 mount.
Try to grab the chromed mount only and unscrew it by hand.


Reply

It is permanent fixed mount , I have removed the three screws and that is all that is there.


Reply

ZoltanB wrote:
It is permanent fixed mount , I have removed the three screws and that is all that is there.


I think you misundestood. Leave the three screws. Read carefully:

Phalbert wrote:
...grab the chromed mount only and unscrew it by hand.


ZoltanB wrote:
#1
...


Reply

Phalbert wrote:
...grab the chromed mount only and unscrew it by hand.

If you can't get a good grip on the adapter, try using a PK rear lens cap to get extra leverage.


Reply

heritagecameras wrote:
Phalbert wrote:
...grab the chromed mount only and unscrew it by hand.

If you can't get a good grip on the adapter, try using a PK rear lens cap to get extra leverage.

It may have been put on with thread lock. I did that to the first of my M42 lenses back in the 80's